Service bulletins for the 2017 Genesis G80
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
98 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| 20-BE-001HG | 2020-02-03. Service bulletin. EQUIPMENT:ELECTRICAL. 1. This bulletin provides guidelines to inspect the USB, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. This bulletin provides physical differences between the USB 2.0 port and USB 3.0 port. |
|---|---|
| 19-BE-017HG | 2019-12-16. Service bulletin. EQUIPMENT; VISIBILITY. Certain vehicles (listed below) equipped with the HomeLink5 (Two Way Communication) mirror may experience programming and operating difficulties with the home garage system. This bulletin provides information related to some of the possible symptoms. |
| 19-BE-011H-1 | 2019-12-16. Service bulletin. LANE DEPARTURE; BACK OVER PREVENTION. The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the BSD/BCW zone and turns on the BSD/BCW warning lamp for the driver. The warning lamp starts blinking, along with an audible sound, when the driver turns on the turn signal lamp to enter the lane where another vehicle is driving. |
| 19-BD-004HG-1 | 2019-11-18. Service bulletin. SEATS:BARRIERS. Certain 2017-2018 G80 (DH) vehicles may have a condition where the seat backboard comes loose. This bulletin describes the procedure to replace the seat backboard clip. |
| 19-EM-001HG | 2019-11-18. Service bulletin. ENGINE. This bulletin provides information regarding the changes in the timing chain and the crankshaft sprockets on certain Genesis G80 (DH) and Genesis G90 (HI) vehicles equipped with Lambda 3.3T / 3.8L GDI engines. |
| Campaign 953 Dea | 2019-11-06. Service bulletin. ENGINE AND ENGINE COOLING. Hyundai has developed a new engine monitoring technology called a Knock Sensor Detection System (KSDS). The technology uses software innovations and leverages existing engine sensors to continuously monitor for symptoms that may precede an engine failure. |
| 19-GI-006H | 2019-11-06. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number. |
| 19-BD-004HG-1 | 2019-11-06. Service bulletin. SEATS. Certain 2017-2018 G80 (DH) vehicles may have a condition where the seat backboard comes loose. This bulletin describes the procedure to replace the seat backboard clip. |
| 19-EM-001HG | 2019-11-06. Service bulletin. POWER TRAIN; ENGINE. This bulletin provides information regarding the changes in the timing chain and the crankshaft sprockets on certain Genesis G80 (DH) and Genesis G90 (HI) vehicles equipped with Lambda 3.3T / 3.8L GDI engines. |
| 19-BD-004HG | 2019-09-30. Service bulletin. SEATS:BARRIERS; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. This bulletin describes the procedure to replace the seat backboard clip. Some vehicles may experience the seat backboard coming loose. |
| 19-EM-002HG | 2019-09-30. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. In an effort to assist customers to keep track of their next vehicle maintenance interval, all 2017-2018MY Genesis vehicles are equipped with the Service Interval Reminder Feature. Follow the information outlined in this bulletin to enable and set the Service Interval Reminder Feature on the applicable models listed below. |
| 19-AT-014HG | 2019-07-29. Service bulletin. POWER TRAIN. This bulletin provides a procedure to diagnose an 8-speed automatic transaxle with a harsh and/or delayed shift. |
| 19-EE-004HG-1 | 2019-07-29. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. This bulletin aids with the general battery maintenance procedure TSB 19-EE-006H, but only applies to vehicles equipped with Blue Link SOC reporting ability. |
| 19-EE-006HG | 2019-07-29. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This bulletin provides information on performing battery maintenance for PDI and In-Stock vehicle inventory. |
| 19-AT-012HG | 2019-07-29. Service bulletin. POWER TRAIN. This TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear). |
| 19-AT-011HG | 2019-07-01. Service bulletin. POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION. The procedure describes the procedure to check the ATF level for 8-speed Rear-Wheel-Drive vehicles. |
| 19-BE-007HG | 2019-05-20. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. This bulletin provides information for the following: General key FOB information including smart key and card key. How to program smart key FOB and card key. How to program additional key FOB when applicable. |
| 19-FL-003HG | 2019-05-20. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION. This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten. |
| 19-FL-003H | 2019-05-20. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten. |
| 19-AT-007HG | 2019-05-20. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCM learning time and improve the shift quality. |
| 19-AT-002HG | 2019-04-22. Service bulletin. ELECTRICAL SYSTEM:STARTER ASSEMBLY:SOLENOID; ELECTRICAL SYSTEM. When servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure to replace the related solenoid and E-module or park position switch. |
| 19-AT-004HG | 2019-04-22. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. This bulletin provides the procedure to replace the O-ring to the automatic transmission fluid (ATF) warmer connector on some vehicles which may exhibit a coolant leak between the ATF connector and engine side heater pipe. |
| 19-AT-001HG | 2019-03-18. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. When servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure and replace the E-module. |
| 19-BD-001HG | 2019-03-18. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY. This bulletin provides the procedure to repair the panoramic sunroof creaking noise originating from the panoramic moving glass assembly. |
| 5NP-Z3J5R-01 | 2019-02-19. Service bulletin. POWER TRAIN. This bulletin provides the procedure to replace the automatic transmission fluid (ATF) warmer connector on some vehicles which may exhibit a coolant leak between the ATF connector and engine side heater pipe. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.