# Service bulletins for the 2022 Ford Ranger

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

86 bulletins from NHTSA, as of 2026-10-19.

- [TSB 26\-2408](/bulletins/11037559.md), 2026-09-30, Service bulletin: POWER TRAIN. This bulletin supersedes 26\-2309. Reason For Update: update the Model section to remove Aviator 10R80, update the Parts list to add 3.3L to W520514\-S440, and add L1MZ\-7Z490\-G valve body separator plate for Aviator. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: \* Harsh 3\-4, 4\-5 upshifts \* Harsh 5\-3, 4\-3 downshifts \* Harsh reverse engagements These symptoms may be worse when cold. This may be due to the F clutch friction plates brinelling into the clutch and planetary container cylinder \(7B177\).
- [SYNC\-26.2.8.5 Ranger](/bulletins/11037515.md), 2026-09-28, Over\-the\-air update: UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Quality improvements include: \-Enhanced AndroidAuto and Apple CarPlay connectivity
- [26L01](/bulletins/11036545.md), 2026-09-01, Other: ENGINE. Customer Satisfaction Program 26L01 Certain 2018\-2024 Model Year Various Vehicles 2.0L Panther Diesel Engine Timing Belt and Tensioner Interval Change
- [TSB 26\-2359](/bulletins/11036074.md), 2026-08-10, Service bulletin: ELECTRICAL SYSTEM; UNKNOWN OR OTHER; POWER TRAIN. Some of the vehicles listed in the Model statement above may exhibit an incorrectly illuminated malfunction indicator lamp \(MIL\) with diagnostic trouble code \(DTC\) P0420 stored in the powertrain control module \(PCM\). This may be due to the software in the PCM.
- [26E04](/bulletins/11035465.md), 2026-08-03, Emissions: UNKNOWN OR OTHER; ELECTRICAL SYSTEM. NEW VEHICLE DELIVERY HOLD \- Emissions Recall 26E04 Certain 2021\-2025 Model Year F\-150, Maverick, Mustang, Ranger, Expedition, Bronco Sport, Explorer, Bronco, Navigator, and Aviator Vehicles Powertrain Control Module Software Update
- [TSB 26\-2309](/bulletins/11034224.md), 2026-07-01, Service bulletin: POWER TRAIN. This bulletin supersedes 26\-2241. Reason For Update: update the parts list to correct the claim quantity of the part number JB3Z\-4B496\-B from 3 to 6. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: \* Harsh 3\-4, 4\-5 upshifts \* Harsh 5\-3, 4\-3 downshifts \* Harsh reverse engagements These symptoms may be worse when cold. This may be due to the F clutch friction plates brinelling into the clutch and planetary container cylinder \(7B177\).
- [25B51](/bulletins/11033577.md), 2026-06-05, Other: ENGINE. Certain 2021\-2024 Model Year Bronco, 2021\-2024 Model Year Bronco Sport, 2020\-2022 Model Year Corsair and Escape, 2016\-2024 Model Year Explorer, 2019\-2020 Model Year Fusion, 2016\-2018 Model Year Focus RS, 2022\-2024 Model Year Maverick, 2016\-2019 Model Year MKC and 2019\-2024 Model Year Ranger Vehicles Equipped with a 2.0L or 2.3L Engine and Engine Block Heater System Block Heater Replacement
- [TSB 26\-2241](/bulletins/11032750.md), 2026-05-18, Service bulletin: POWER TRAIN. This bulletin supersedes 25\-2587. Reason For Update: update the Parts list to add the F\-clutch friction plates HL3Z\-7B164\-D and the F\-clutch steel plates PR3Z\-7B164\-A for the proper vehicle lines, replace the transfer case mounting bolt part number from W714288\-S438 to W714288\-S437, update the part number W720688\-S439 quantity from 2 to 1, update the part number ML3Z\-7869\-C claim quantity from 2 to 1 \(only if necessary\), update the description of CXT\-10\-LV6 and XT\-10\-QLVC by adding "transfer case fluid, 4WD only", move HL3Z\-7A191\-B and L1MZ\-7F396\-A fluid pan gaskets to the parts to inspect and replace list, and remove TL1Z\-6775\-A self adhesive heat shield from the F\-150/Expedition/Navigator parts list as it is not a discard item. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: \* Harsh 3\-4, 4\-5 upshifts \* Harsh 5\-3, 4\-3 downshifts \* Harsh reverse engagements These symptoms may be worse when cold. This may be due to the F clutch friction plates brinelling into the clutch and planetary container cylinder \(7B177\).
- [SSM 54720](/bulletins/11031263.md), 2026-04-10, Service bulletin: ELECTRICAL SYSTEM; LANE DEPARTURE: BLIND SPOT DETECTION. Various 2020\-2026 Ford and Lincoln vehicles equipped with blind spot information system \(BLIS\) may experience an inoperative blind spot monitoring with a "Blind Spot System Fault" message displayed in the instrument panel cluster \(IPC\). This may also be accompanied by diagnostic trouble codes \(DTCs\) B118C:11 and/or B118C:15 stored in the driver door module \(DDM\), and/or B118D:11 and/or B118D:15 stored in the passenger door module \(PDM\). This may be due to the wiring connector from the mirror to the BLIS module. If diagnostics lead to an internal mirror wiring harness fault, a new lower level BLIS light pigtail is now released for service. It is not necessary to replace the exterior mirror assembly. Use part number SC3Z\-14A411\-B to resolve the concern.
- [SSM 54719](/bulletins/11031262.md), 2026-04-10, Service bulletin: POWER TRAIN. For 20212026 vehicles equipped with the 10R80 transmission, a new Transmission Clutch Circuit Leak Test has been introduced in the Ford Diagnosis and Repair System \(FDRS\). This test utilizes the pressure and vacuum transducer \(PVT\) when available. When referred to a specific clutch \(A\-F\) test by a pinpoint test in Workshop Manual \(WSM\), Section 307\-01 \> Diagnosis and Testing, the Clutch Assembly tests have been updated with a hyperlink to the new Transmission Line Pressure Test \- Pressure Vacuum Transducer \(PVT\) Is Available procedure in WSM, Section 307\-01 \> General Procedures. This procedure provides instructions to perform the FDRS Transmission Clutch Circuit Leak Test when applicable. The new test improves the accuracy of detecting leaks within transmission fluid circuits and replaces the previous air check method. The previous air check procedure has been shown to produce a high rate of false positives, which may lead to unnecessary repairs when no actual leak is present. Accordingly, the air check procedure is not to be used for diagnosing internal transmission hydraulic leaks or as justification
- [SSM 54674](/bulletins/11030791.md), 2026-04-06, Service bulletin: POWER TRAIN. For 2021\-2026 vehicles equipped with the 10R80 transmission, a new Transmission Clutch Circuit Leak Test has been introduced in the Ford Diagnosis and Repair System \(FDRS\). This test utilizes the pressure and vacuum transducer \(PVT\) when available. The Workshop Manual \(WSM\) has been updated under Section 307\-01 \> Diagnosis and Testing to include this procedure. The new test improves the accuracy of detecting leaks within transmission fluid circuits and replaces the previous air check method.
- [25N17](/bulletins/11030282.md), 2026-03-27, Other: LANE DEPARTURE: BLIND SPOT DETECTION; BACK OVER PREVENTION: WARNINGS; BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING; UNKNOWN OR OTHER. Advance Notice – Customer Satisfaction Program 25N17 Certain 2015\-2025 Model Year Multiple Vehicle Lines Rear View Camera Replacement If Required After Dealer Evaluation
- [TSB 25\-2587](/bulletins/11030177.md), 2026-03-23, Service campaign: POWER TRAIN; UNKNOWN OR OTHER. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: \* Harsh 3\-4, 4\-5 upshifts \* Harsh 5\-3, 4\-3 downshifts \* Harsh reverse engagements These symptoms may be worse when cold. This may be due to the F clutch friction plates brinelling into the clutch and planetary container cylinder \(7B177\).
- [SSM 54589](/bulletins/11029595.md), 2026-03-04, Other: ELECTRICAL SYSTEM. Some 2019\-2024 Ford and Lincoln vehicles equipped with SYNC3 may experience various connectivity concerns with The Ford App Lincoln App including but not limited to: missing activation prompt pop\-upon the vehicle's center display screen when attempting to activate vehicle through The Ford App Lincoln App, incorrect location global positioning system GPS reported through The Ford App Lincoln App, problems with remote commands being performed through The Ford App Lincoln App and or incorrect data information reported on The Ford App Lincoln App. These symptoms will be accompanied by diagnostic trouble code DTC B156D 89 in the TCU. This may be due to the accessory protocol interface module APIM software. To correct the condition, update the APIM software.
- [SSM 54592](/bulletins/11029081.md), 2026-02-27, Service bulletin: POWER TRAIN. For 20172026 vehicles equipped with a 10R transmission, a revision to the Road Testing Vehicle procedure has been made in the WSM, located in Section 307\-01 \> Diagnosis and Testing. This updated procedure improves the diagnosis of customer reported transmission concerns and aids in locating the proper root cause. During diagnosis and testing, details regarding whether the condition is more prevalent when the vehicle is hot or cold, throttle percentage at the time of occurrence, vehicle speed, the specific shift involved, and whether the issue occurs during transmission engagements \(N\>R, N\>D, R\>D, or D\>R\) should be noted. Engineering requests including these detailed operating conditions that will significantly assist with root cause analysis. Diagnosis, testing, and repair should use established labor times outside this article.
- [SSM 54601](/bulletins/11029052.md), 2026-02-27, Service bulletin: ELECTRICAL SYSTEM; STRUCTURE:BODY; UNKNOWN OR OTHER. Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module \(BCM\). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab \> Accessories \> Installation \> Wireless RF Keypad Diagnosis Guide \> PPT C \> Step C2.\<br /\>\<br /\> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k
- [25L02](/bulletins/11026928.md), 2026-01-05, Other: UNKNOWN OR OTHER. Special Field Action 25L02 Certain 2017\-2024 Model Year California Emissions\-Certified Vehicles Transmission Control Assembly Reimbursement
- [SSM 54313](/bulletins/11024526.md), 2025-10-28, Service bulletin: LANE DEPARTURE: BLIND SPOT DETECTION; ELECTRICAL SYSTEM. Some 2020\-2025 various Ford and Lincoln vehicles equipped with blind spot information system \(BLIS\) may experience an inoperative blind spot monitoring with a "Blind Spot System Fault" message displayed in the instrument panel cluster \(IPC\). This may also be accompanied by diagnostic trouble codes \(DTCs\) B118C:11 and/or B118C:15 stored in the driver door module \(DDM\), and/or B118D:11 and/or B118D:15 stored in the passenger door module \(PDM\). This may be due to the wiring connector from the mirror to the BLIS module. If diagnostics lead to an internal mirror wiring harness fault, a new lower level BLIS light pigtail is now released for service. It is not necessary to replace the exterior mirror assembly. Use part number SC3Z\-14A411\-B to resolve the concern.
- [SSM 54116](/bulletins/11021803.md), 2025-08-12, Service bulletin: UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Various 2019\-2024 Ford and Lincoln vehicles equipped with SYNC 3 may experience a partially or fully black center display screen at start\-up using Apple CarPlay or Android Auto. This does not affect rear camera operation. This may be due to interference from the phone being connected into the media hub using a universal serial bus \(USB\) cable during SYNC system boot up. To correct his condition, advise the customer to disconnect the USB cable from the phone. If the center display screen displays normally, reconnect the phone. If the concern persists, disconnect the phone from the USB cable, cycle the ignition off and open the driver's door so the interior lights come on. Close the door, start the vehicle and wait for the center display screen to boot up past the start\-up animation and display the home screen, then reconnect the phone using the USB cable. If the concern persists after this procedure, follow normal Workshop Manual diagnostics for a blank screen concern.
- [SSM 53973](/bulletins/11020044.md), 2025-07-02, Service bulletin: POWER TRAIN; ENGINE. Some 2021\-2024 Edge/Nautilus, 2021\-2025 Bronco/Bronco Sport/E\-Series/Escape/Corsair/Expedition/Navigator/Explorer/Aviator/F\-150/F\-Super Duty/Mustang/Ranger, and 2022\-2025 Maverick vehicles may require an A/C compressor clutch assembly replacement be performed for various concerns. Workshop Manual \(WSM\), Section 412\-00 Removal and Installation has been updated to eliminate the need to remove and install the A/C compressor to change out the A/C Compressor clutch assembly.
- [SSM 53966](/bulletins/11019702.md), 2025-06-24, Service bulletin: ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Some 2021\-2025 Ford/ Lincoln vehicles equipped with SYNC4 may not be able to perform an update to the accessory protocol interface module \(APIM\). This may be due to the software in the APIM. Ford Engineering has de\-activated the ability to update these SYNC4 APIM modules as applicable, and the Ford Diagnosis and Repair System \(FDRS\) will not present an update for the APIM module. Some existing directed repairs may be impacted, check Professional Technician System \(PTS\) before attempting any specific technical service bulletin \(TSB\)/special service message \(SSM\) and check field service action \(FSA\) landing pages before attempting any FSA repairs. For any vehicle repairs requiring a software update that includes an APIM update in the programming sequence, if the 5\-digit product code for the APIM software is equal to or lower than 23187, do not attempt to update affected modules at this time. To determine the 5\-digit product code for the APIM software on the vehicle, while the vehicle center display screen is powered up with ignition in run or accessory, go to Settings \> General \> About SYNC.
- [24B47 S1](/bulletins/11019259.md), 2025-06-05, Other: UNKNOWN OR OTHER. CERTAIN 2018\-2024 MODEL YEAR VARIOUS VEHICLES — UPDATE SYNC SOFTWARE
- [TSB 25\-2134](/bulletins/11017141.md), 2025-04-23, Service bulletin: UNKNOWN OR OTHER. This bulletin supersedes TSB 25\-2024. Reason for update: update the Part List and Service Procedure Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: \* Harsh engagement \* Delayed engagement \* Harsh shift \* Delayed shift \* Illuminated malfunction indicator lamp \(MIL\) with diagnostic trouble codes \(DTC\) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module \(PCM\) or transmission control module \(TCM\). This may be due to axial movement of the CDF clutch cylinder \(7H351\) sleeve causing hydraulic circuit leaks. NOTE: If internal transmission service is required to address a concern detected with the CDF clutch cylinder following this article, technicians should carefully inspect and replace other transmission components and flush transmission fluid cooler only as necessary to confirm proper function. Add a new line to the repair order to document any additional
- [SSM 53602](/bulletins/11017061.md), 2025-04-16, Service bulletin: UNKNOWN OR OTHER. Some 2022\-2025 Ford or Lincoln vehicles may exhibit DTCs B142E:78, B1432:78, and/or B1433:54 diagnostic trouble codes \(DTCs\) in the CCM. This may be due to non\-factory sized tires that may cause inaccurate speedometer readings that can impact the functionality of the CCM. When a vehicle is modified in this manner, replacement or realignment of the CCM may impact the normal operation of the system and/or performance of radar and camera\-based features. Repair or replacement of the CCM when a vehicle is equipped with non\-factory size tires may not be warrantable and subject to chargeback.
- [TSB 25\-2024](/bulletins/11014144.md), 2025-02-11, Service bulletin: UNKNOWN OR OTHER. "Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: • Harsh engagement • Delayed engagement • Harsh shift • Delayed shift • Illuminated MIL with DTCs P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the PCM or TCM"

More: [the next page](/v1/vehicles/2022_ford_ranger/bulletins?cursor=2025-02-11_11014144) (JSON)

JSON: [/v1/vehicles/2022_ford_ranger/bulletins](/v1/vehicles/2022_ford_ranger/bulletins)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%202022%20Ford%20Ranger&page=https%3A%2F%2Fopen.wenmarpro.com%2Fmakes%2Fford%2Franger%2F2022%2Fbulletins&vehicle=2022%20Ford%20Ranger)