# Recalls that may apply to the 2016 Ford Mustang

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

## United States (NHTSA), as of 2026-10-19

- [25V614000](/recalls/nhtsa/25V614000.md), 2025-09-12: SEAT BELTS:PRETENSIONER. Ford Motor Company \(Ford\) is recalling certain 2015\-2017 Mustang vehicles. Water and road salt may corrode the front seat belt anchor pretensioner cables.
- [25V572000](/recalls/nhtsa/25V572000.md), 2025-09-03: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. Ford Motor Company \(Ford\) is recalling certain 2015\-2019 Lincoln MKC, Mustang, F\-350 SD, F\-250 SD, F\-450 SD, 2015\-2017 Lincoln Navigator, Expedition, 2015\-2018 Edge, Transit Connect, 2016\-2019 F\-550 SD, Transit, 2017\-2019 Econoline, and 2019 Ranger vehicles. The rearview camera may display a distorted, inverted, or blank image when the vehicle is in reverse.
- [22V082000](/recalls/nhtsa/22V082000.md), 2022-02-16: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. Ford Motor Company \(Ford\) is recalling certain 2015\-2017 Mustang vehicles.  The rearview camera wiring may be loose or damaged, which can result in a blank or distorted image.
- [16V779000](/recalls/nhtsa/16V779000.md), 2016-10-26: ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS. Ford Motor Company \(Ford\) is recalling certain model year 2015\-2017 Mustang vehicles manufactured February 24, 2015, to August 30, 2016.  A hose may separate from the engine oil cooler tube assembly causing an oil leak. Built 2015\-02\-24 to 2016\-08\-30.
- [15V707000](/recalls/nhtsa/15V707000.md), 2015-10-26: CHILD SEAT:TETHER: CONNECTOR/CLIP; SEAT BELTS. Ford Motor Company \(Ford\) is recalling certain model year 2016 Ford Mustang vehicles manufactured September 26, 2015, to October 1, 2015.  The front and rear seat belts and child seat tether anchors may have been damaged in shipping from the supplier to the vehicle assembly plant and may not adequately restrain the occupant in a crash.  As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 208, "Occupant Crash Protection," and 225, "Child restraint anchorage systems." Built 2015\-09\-26 to 2015\-10\-01.

## Canada (Transport Canada), as of 2026-10-19

- [2025484](/recalls/tc/2025484.md), 2025-09-12: Seats And Restraints. Issue: On certain vehicles, the driver and passenger\-front seat belt pretensioner cable could corrode over time. As a result, the cable could break and the seat belt may not hold a person during a crash.  Safety Risk: A seat belt that doesn't work properly could increase the risk of injury in a crash.  Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the seat belt\(s\). The dealer will also modify the floor covering around the seat belt anchor pretensioner cables.
- [2025449](/recalls/tc/2025449.md), 2025-09-03: Visual System. Issue: On certain vehicles, there could be a problem with the connections inside the rearview camera. As a result, the rearview camera image may not display correctly or at all when the transmission is shifted into reverse. Note: For certain models, this recall also affects incomplete vehicles.  Safety Risk: A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.  Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the rearview camera.
- [2024605](/recalls/tc/2024605.md), 2024-10-11: Seats And Restraints. Issue: Ford Motor Company of Canada is conducting a parts recovery campaign targeting a random sample of 2015\-2017 Ford Mustang vehicles in the Montreal area built between February 11, 2014 and October 2, 2017. The driver and front passenger seat belt assemblies are being recovered to aid in Ford's analysis in support of Transport Canada defect investigation file no. 3280\-38\-20. Note: This action is not being conducted under the requirements of the Motor Vehicle Safety Act.  Safety Risk: No safety defect has been identified with these seat belts.  Corrective Actions: Ford will notify select owners by mail and advise them to take their vehicle to a dealership to replace the driver and front passenger seat belts at no charge.
- [2022070](/recalls/tc/2022070.md), 2022-02-16: Visual System. Issue: On certain vehicles, opening and closing the trunk lid could damage the wiring for the rearview camera. If this happens, the rearview camera image may not display properly when you shift to reverse. Also, there could be a problem with the connections inside the rearview camera.  Safety Risk: A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.  Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a dealer to replace the rearview camera and/or inspect and repair the decklid wiring.
- [2016527](/recalls/tc/2016527.md), 2016-10-25: Engine. On certain vehicles equipped with 5.2 litre V8 engines, the engine oil cooler tube assembly may have insufficient crimps. This could lead to a hose separating, which would cause an oil leak. The sudden loss of engine oil could result in an engine failure causing a loss of motive power, and an oil leak, in the presence of an ignition source could result in a fire.  Both of these conditions could increase the risk of injury and/or property damage.  Correction: Dealers will replace the engine oil cooler tube assembly.
- [2015508](/recalls/tc/2015508.md), 2015-10-27: Seats And Restraints. Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standards \(CMVSS\) 210.1 \- User\-ready Tether Anchorages for Restraint Systems and \(CMVSS\) 209 – Seat Belt Assemblies.  Front and rear seat belts may have been damaged prior to installation and may fail to conform to CMVSS 209 assembly performance standards, and the strength requirements of the CMVSS 210.1 standard.  These issues could result in the belts not adequately restraining occupants in a crash, increasing the risk of injury and/or damage to property.  Correction: Dealers will replace both front seatbelt retractors and pretensioners as well as both rear seatbelt retractors, rear seatbelt buckles, and rear child safety seat tether anchors.

## Check a VIN

- [NHTSA recall lookup by VIN, United States](https://www.nhtsa.gov/recalls)
- [Transport Canada recall search, Canada](https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng)

Contains information licensed under the Open Government Licence – Canada.

JSON: [/v1/vehicles/2016_ford_mustang/recalls](/v1/vehicles/2016_ford_mustang/recalls)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%202016%20Ford%20Mustang&page=https%3A%2F%2Fopen.wenmarpro.com%2Fmakes%2Fford%2Fmustang%2F2016%2Frecalls&vehicle=2016%20Ford%20Mustang)