# C103E on the 2016 Ford Mustang

The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.

This code is specific to a manufacturer and is not described here.

## Bulletins for this model year that name C103E

- [10205005](https://open.wenmarpro.com/bulletins/10205005), 2021-12-20: GT350\-R Drive selecftable suspension malfunction service required message with DTC C103E \- Built on 11/01/2015 and through 12/21/2015
- [10091436](https://open.wenmarpro.com/bulletins/10091436), 2017-02-13: SOME 2016 \- 2017 MUSTANG GT350\-R VEHICLES MAY DISPLAY DRIVER SELECTABLE SUSPENSION MALFUNCTION SERVICE REQUIRED IN THE INSTRUMENT PANEL CLUSTER MESSAGE CENTER ALONG WITH DTC C103E:00 WHEN DRIVING WITH THE SPACER BLOCKS REMOVED AND LESS THAN 160 KM \(100 MILES\) ON THE ODOMETER. CHECK THE VEHICLE DYNAMICS MODULE \(VDM\) FOR THE LATEST CALIBRATION USING INTEGRATED DIAGNOSTIC SYSTEM \(IDS\). MAKE SURE YOU ARE CONNECTED TO THE INTERNET WHEN ENTERING MODULE PROGRAMMING TO OBTAIN THE LATEST UPDATES. CALIBRATION FILES MAY ALSO BE OBTAINED AT WWW.MOTORCRAFTSERVICE.COM. RAISE THE VEHICLE ON A HOIST, REFER TO WORKSHOP MANUAL \(WSM\), SECTION 100\-02. SUSPENSION MUST BE UNLOADED WITH THE WHEEL/TIRE ASSEMBLIES HANGING DOWN. PERFORM THE RIDE HEIGHT SENSOR CALIBRATION ROUTINE. FOLLOW THE INSTRUCTIONS IN THE IDS SCAN TOOL.
- [10075270](https://open.wenmarpro.com/bulletins/10075270), 2016-06-22: GT350\-R \- DRIVER SELECTABLE SUSPENSION MALFUNCTION SERVICE REQUIRED MESSAGE WITH DTC C103E \- BUILT ON 11/1/2015 AND THROUGH 12/21/2015 ISSUE Some 2016 Mustang GT350\-R vehicles built on 11/1/2015 and through 12/21/2015 may display Driver Selectable Suspension Malfunction Service Required in the instrument panel cluster \(IPC\) message center along with diagnostic trouble code \(DTC\) C103E:00 when driving with the spacer blocks removed and less than 160 Km \(100 miles\) on the odometer.