# U0293 on the 2021 Ford Mustang Mach\-E

The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.

Nobody has written a description of this code yet.

## Bulletins for this model year that name U0293

- [11028844](https://open.wenmarpro.com/bulletins/11028844), 2026-02-17: Some 2021\-2022 Mustang Mach\-E vehicles may exhibit a "Parking Brake Failure, Service Immediately message displayed in the instrument panel cluster \(IPC\) and diagnostic trouble codes \(DTCs\) C2007, C2008, C1034, U0293 and/or U0100 stored in the anti\-lock brake system \(ABS\) module. To correct the condition, follow the technical instructions outlined FSA 22P31 \(US\) or 22B47 \(Canada\) for an appropriate repair direction.
- [11020980](https://open.wenmarpro.com/bulletins/11020980), 2025-07-30: This article supersedes TSB 21\-2245 to update labor times from M\-time to AP\-time and add a cap. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: \* "Stop Safely Now" message in the instrument panel cluster \(IPC\) \* Illuminated powertrain malfunction \(wrench\) indicator with diagnostic trouble codes \(DTCs\) P1A10, U0293 and/or U1011 \* Loss of power This may be due to the parameters in the powertrain control module \(PCM\).
- [10210475](https://open.wenmarpro.com/bulletins/10210475), 2022-04-26: Some 2021\-2022 Mustang Mach\-E vehicles built on or before 15\-Mar\-2022 may exhibit a Parking Brake Fault Service Now message in the instrument panel cluster \(IPC\) and DTCs C2007, C2008, C1034, U0293 and/or U0100 in the antilock brake system \(ABS\) module. This may be due to an open/corroded circuit near the rear caliper. To correct the condition, follow the Service Procedure to replace the electronic parking brake \(EPB\) connector.
- [10200736](https://open.wenmarpro.com/bulletins/10200736), 2021-09-02: Some 2021 Mustang Mach\-E vehicles built on or before 20\-Mar\-2021 may exhibit a loss of power, Stop Safely Now message in the instrument panel cluster \(IPC\), and illuminated malfunction indicator lamp \(MIL\) with diagnostic trouble codes \(DTCs\) P1A10, U0293 and/or U1011. This may be due to the parameters in the powertrain control module \(PCM\). To correct the condition, follow the Service Procedure to reprogram various modules starting with the PCM.