# P04E3 on the 2016 Ford F\-550

The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.

Nobody has written a description of this code yet.

## Bulletins for this model year that name P04E3

- [10207142](https://open.wenmarpro.com/bulletins/10207142), 2022-02-04: Some 2016 F\-Super Duty vehicles equipped with a 6.7L engine may have diagnostic trouble code \(DTC\) P04E3 stored in the powertrain control module \(PCM\) after reprogramming the PCM software for various reasons. Vehicles built on or after 11\-Nov\-2015 are not equipped with a crankcase ventilation sensor \(CRNKCSVT\). This DTC may be caused by incorrect PCM programming. To correct the condition, start a new vehicle session and run the PCM Programmable Module Installation \(PMI\). The IDS scan tool will ask to verify the style of the connector on the crankcase vent \(CCV\) hose. Answering this prompt incorrectly will cause DTC P04E3 to be stored in the PCM. A new Technical Support Video has been added to PTS at: http://site\-307934.bcvp0rtal.com/detail/videos/303\-\-\-engine/video/6294017439001/p04e3\-after\-pcm\-reprogramming\-on\-14\-16\-my\-6.7l\-super\-duties.
- [10191068](https://open.wenmarpro.com/bulletins/10191068), 2021-05-03: Some 2016 F\-Super Duty trucks equipped with a 6.7L engine may have diagnostic trouble code \(DTC\) P04E3 stored in the powertrain control module \(PCM\) after reprogramming the PCM software for various reasons. Vehicles built on or after 11\-Nov\-2015 are not equipped with a crankcase ventilation sensor \(CRNKCSVT\). This DTC may be caused by incorrect PCM programming. To correct the condition, start a new vehicle session using a computer with IDS that has not been previously connected to the vehicle. On the vehicle specification screen, answer NO when asked if the vehicle is correct. Enter the PCM tear tag and perform PCM software reprogramming. The IDS scan tool will ask to verify the style of the connector on the crankcase vent \(CCV\) hose. Answering this prompt incorrectly will cause DTC P04E3 to be stored in the PCM.
- [10148705](https://open.wenmarpro.com/bulletins/10148705), 2018-11-19: Some 2014\-2016 F\-Super Duty vehicles built on or before 11\-Nov\-2015 equipped with a 6.7L engine may exhibit an illuminated MIL with DTCs P04DB, P04E2 and/or P04E3 stored in the powertrain control module \(PCM\). Follow the Service Procedure steps to correct the condition.