WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Ford F-350

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

254 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
TSB 18-23932019-03-04. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Some 2019 F-Super Duty vehicles equipped with a 6.7L engine built on or before 21-Aug-2018 may exhibit an illuminated MIL with DTC P205B stored in the powertrain control module (PCM). Follow the Service Procedure steps to correct the condition.
18N04-S12019-01-07. Service bulletin. FUEL SYSTEM, DIESEL; ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING:ENGINE:DIESEL. Certain 2018 Model Year F-150, 2019 Model Year F-250 through F-550 Superduty and 2019 Model Year F-650 through F-750 Medium Duty Vehicles Equipped with a Diesel Engine - Powertrain Control Module Reprogramming
SSM 476562019-01-07. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. Some 2018-2019 F-Super Duty vehicles equipped with a 6.7L engine built on 1-Dec-2017 and through 1-Aug-2018 may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P2122, P2127, U0401, U0109, P0480, P008A, P025C, P027A and/or P064A. This may be due to powertrain control module (PCM) connector C1232B not being properly seated to the PCM.
SSM 475972018-11-19. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); EQUIPMENT. Some 2013-2019 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated MIL with only DTC P2074 stored in the powertrain control module (PCM). This may be due to a dirty air filter, replace the filter if necessary. Do not replace the PCM or mass air flow (MAF) sensor for this concern. Instead perform a MAF parameter reset under: Toolbox > Powertrain > Service Functions > Reset/Clear Specified Function > Reset/Clear Functions > MAF Sensor. Engineering is investigating. Monitor OASIS for updates.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.