Recalls that may apply to the 2017 Ford F-150
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
Only campaigns about Seats And Restraints are shown.
| None found. |
| 2018470 | 2018-09-04. Seats And Restraints. On certain vehicles, the activation of the front seat belt pretensioners in a crash may result in momentary ignition of pretensioner exhaust gases. This could ignite materials in the B-pillar area, leading to a fire causing injury and/or damage to property. Correction: Dealers will inspect the B-pillar area, modify the floor covering and sound insulation, and apply heat-resistant tape. |
|---|---|
| 2017465 | 2017-09-26. Seats And Restraints. Certain vehicles equipped with a front passenger side manual seat track may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 207 - Anchorage of Seats and CMVSS 210 – Seat Belt Anchorages. If the front passenger seat track does not have sufficient weld penetration between the seat belt anchor and the seat cushion frame, the front seat passenger may not be properly restrained in the event of a crash, increasing the risk of injury. Correction: Dealers will replace the manual seat track. |
| 2017413 | 2017-08-30. Seats And Restraints. Certain vehicles equipped with rear inflatable seat belts may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 210 – Seat Belt Assembly Anchorages. The left rear inflatable seat belt buckle may have been assembled with a rivet that was improperly staked. As a result, the left rear seat belt assembly could separate from its mounting bracket during a crash, which could increase the risk of injury and would fail to meet the anchorage strength requirements of the standard. Correction: Dealers will inspect the left rear seat belt buckle rivet, and replace the seat belt buckle assembly if necessary. |
| 2017275 | 2017-05-23. Seats And Restraints. Certain vehicles equipped with a manual-recline driver seat may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 202 - Head Restraints and CMVSS 207 - Anchorage of Seats. Due to a manufacturing error, the recliner mechanism may have been incorrectly welded to the seat-back frame, which would result in the seat failing to meet the requirements of the standards. This could increase the risk of injury to the seat occupant in the event of a crash. Correction: Dealers will inspect the front driver seat back frame build date and replace as necessary. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.