# B1154 on the 2016 Ford Explorer

The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.

This code is specific to a manufacturer and is not described here.

## Bulletins for this model year that name B1154

- [10156883](https://open.wenmarpro.com/bulletins/10156883), 2019-04-08: Some 2016\-2019 Explorer, 2016\-2018 MKX, 2019 Edge/Nautilus, 2017\-2019 Fusion/MKZ, and 2018\-2019 F\-150/Mustang/Expedition/Navigator vehicles equipped with climate controlled seats may exhibit a buzzing noise from the front seats, front seats too warm, and/or inoperative climate controlled front seats. DTCs B14BA:13, B1154:4B, and/or B14B9:13 may also be present. This may be due to loose terminal pin fit on the driver seat module \(DSM\) connector C341D \(16 pin\). If a loose terminal pin fit condition is found during normal diagnostics per Workshop Manual \(WSM\), Section 501\-10, a new service pigtail connector \(part number 3U2Z\-14S411\-BRAB\) is available. Refer to Wiring Diagram, Cell 119 to make sure C341D is a 16 pin connector and not a 20 pin connector. Refer to Wiring Diagram, Cell 5 for the recommended splicing procedures.
- [10155571](https://open.wenmarpro.com/bulletins/10155571), 2019-04-01: Some 2016\-2019 Explorer, 2016\-2018 MKX, 2019 Edge/Nautilus, 2017\-2019 Fusion/MKZ, and 2018\-2019 F\-150/Mustang/Expedition/Navigator vehicles equipped with climate controlled seats may exhibit a buzzing noise from the front seats, front seats too warm, and/or inoperative climate controlled front seats. DTCs B14BA:13, B1154:4B, and/or B14B9:13 may also be present. This may be due to loose terminal pin fit on the driver seat module \(DSM\) connector C341D \(16 pin\). If a loose terminal pin fit condition is found during normal diagnostics per Workshop Manual \(WSM\), Section 501\-10, a new service pigtail connector \(part number 3U2Z\-14S411\-BRAB\) is available. Refer to Wiring Diagram, Cell 119 to make sure C341D is a 16 pin connector and not a 20 pin connector. Refer to Wiring Diagram, Cell 5 for the recommended splicing procedures.