# P0767 on the 2026 Ford Escape

The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.

Nobody has written a description of this code yet.

## Bulletins for this model year that name P0767

- [11032758](https://open.wenmarpro.com/bulletins/11032758), 2026-05-19: Some 2023\-2026 Escape vehicles equipped with an 8F35 transmission may exhibit an illuminated malfunction indicator lamp \(MIL\) with diagnostic trouble codes \(DTC\) P0767, P0766 and/or P2703 stored in the powertrain control module \(PCM\) and harsh/no reverse engagement. This may be due to the selectable one\-way clutch \(SOWC\). To correct the condition, remove the transmission. Refer to Workshop Manual \(WSM\) \> Section 307\-01. Disassemble the transmission only far enough to access the SOWC. Refer to WSM, Section 307\-01 \> Overhaul and perform Steps 34\-66. Remove the SOWC assembly, disassemble the A\-clutch and discard the SOWC. Refer to WSM, Section 307\-01 \> Overhaul and perform Steps 164\-170. Assemble the new SOWC with the A\-clutch components. Refer to WSM, Section 307\-01 \> Overhaul and perform Steps 173\-179. The A\-clutch seals can be reused unless damaged. Install the new SOWC and reverse the procedure to reassemble the transmission. Overhaul the main control valve body. Refer to WSM, Section 307\-01 \> Overhaul \> Main Control Valve Body. Replace the torque converter seal. Refer to WSM, Section 307\-01