P0340 on the 2020 Ford Escape
The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.
Nobody has written a description of this code yet.
| SSM 50245 | 2021-11-02. Service bulletin. Some 2020-2021 Escape vehicles may exhibit various symptoms due to a loss of voltage reference (VREF) from the 14290 harness above the steering shaft u-joint. Possible symptoms may include an illuminated malfunction indicator lamp (MIL),runs rough, fuse 44 open and may or may not set DTCs P06A7, P0840, P0842, P0845, P0847, P2122, P2127, P0522, P008A, P06A6, P2196, P0192, P0369, P0212, P0340, P0344, P0365, P0532,P0504, P07E4, P06E9, P0369, C175E, C175B, C2302, and/or C0040. Inspect the 14290 harness directly above the steering shaft u-joint near the upper brake pedal mount that may come in contact with the steering shaft. Rotation of the steering wheel may cause the short circuit. If damage is found, repair as necessary and move the harness away from the steering shaft U-joint area and secure the harness by installing the harness locator over the stud already provided. |
|---|---|
| SSM 50116 | 2021-09-28. Service bulletin. Some 2020-2021 Escape vehicles may exhibit a loss of voltage reference (VREF) or runs rough, blow fuse 44 and may or may not set DTC's P06A7,P0840,P0842,P0845,P0847,P2122,P2127,P0522,P008A,P06A6,P2196,P0192, P0212,P0340,P0344,P0365,P0532,P06E9,P0369,C175E,C175B,C2302,P0369. The 14290 harness directly above the steering shaft u-joint near the upper brake pedal mount may come in contact with the steering shaft. Rotation of the steering wheel will trigger the short circuit. Inspect the harness for damage at that location and repair as necessary. If damage was found, move the harness away from the steering shaft U-joint area and secure the harness. Refer to Wiring Diagram Cell 005. |
| 20B14-S2 | 2020-06-05. Service bulletin. Updated Technical Information for Power Steering Control Module (PSCM) reset after PCM reprogram. Unplugging the PSCM is no longer required as new FDRS service function is available. In some of the affected vehicles, the customer may experience limited powertrain acceleration and speed along with a “Stop Safely Now message and a check engine light displayed in the instrument cluster. Diagnostic Trouble Codes (DTCs) P0340 and P1A0C may be present in the Powertrain Control Module (PCM). This is due to crankshaft and camshaft signal quality during start up, resulting in incorrect synchronization and the inability of the engine to produce the requested torque. SERVICE |
| 20B14-S1 | 2020-06-05. Service bulletin. In some of the affected vehicles, the customer may experience limited powertrain acceleration and speed along with a “Stop Safely Now” message and a check engine light displayed in the instrument cluster. Diagnostic Trouble Codes (DTC’s) P0340 and P1A0C may be present in the Powertrain Control Module (PCM). This is due to crankshaft and camshaft signal quality during start up, resulting in incorrect synchronization and the inability of the engine to produce the requested torque. |
| 20B14 | 2020-05-05. Service bulletin. In some of the affected vehicles, the customer may experience limited powertrain acceleration and speed along with a Stop Safely Now message and a check engine light displayed in the instrument cluster. Diagnostic Trouble Codes (DTCs) P0340 and P1A0C may be present in the Powertrain Control Module (PCM). This is due to crankshaft and camshaft signal quality during start up, resulting in incorrect synchronization and the inability of the engine to produce the requested torque. |
5 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.