# Recalls that may apply to the 2022 Ford Edge

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

## United States (NHTSA), as of 2026-10-19

- [26V124000](/recalls/nhtsa/26V124000.md), 2026-03-03: BACK OVER PREVENTION:SOFTWARE. Ford Motor Company \(Ford\) is recalling certain 2021\-2026 Ford Bronco and 2021\-2024 Ford Edge vehicles. The Accessory Protocol Interface Module \(APIM\) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
- [25V315000](/recalls/nhtsa/25V315000.md), 2025-05-09: BACK OVER PREVENTION:SOFTWARE. Ford Motor Company \(Ford\) is recalling certain 2021\-2024 Bronco, F\-150, 2021\-2024 Edge, 2022\-2025 Escape, F\-250, F\-350, F\-450, F\-550, F\-600, 2022\-2024 Expedition, 2022\-2025 Transit, 2021\-2023 Mach\-E, 2024 Ranger, Mustang, 2021\-2023 Lincoln Nautilus, 2022\-2024 Navigator, and 2023\-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.
- [25V160000](/recalls/nhtsa/25V160000.md), 2025-03-14: BACK OVER PREVENTION:SOFTWARE. Ford Motor Company \(Ford\) is recalling certain 2021\-2022 Edge vehicles previously repaired incorrectly under recall number 22V\-151.  A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse. Built 2020\-12\-15 to 2022\-01\-20.
- [24V635000](/recalls/nhtsa/24V635000.md), 2024-08-23: ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL. Ford Motor Company \(Ford\) is recalling certain 2021\-2022 Bronco, F\-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine.  The engine intake valves may break while driving, which can result in engine failure and a loss of drive power. Built 2021\-05\-10 to 2021\-10\-29.
- [22V151000](/recalls/nhtsa/22V151000.md), 2022-03-11: BACK OVER PREVENTION:DISPLAY FUNCTION; BACK OVER PREVENTION:SOFTWARE. Ford Motor Company \(Ford\) is recalling certain 2021\-2022 Edge vehicles.  A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.

## Canada (Transport Canada), as of 2026-10-19

- [2026093](/recalls/tc/2026093.md), 2026-03-03: Visual System. Issue: Under certain conditions, the infotainment system could overheat. As a result, the rearview camera image may not display when the transmission is shifted into reverse.  Safety Risk: A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.  Corrective Actions: Ford will notify owners by mail and send a wireless over\-the\-air software update to eligible vehicles to update the APIM software. Alternatively, you may schedule an appointment to have the update performed at a Ford dealership.
- [2025260](/recalls/tc/2025260.md), 2025-05-09: Visual System. Issue: On certain vehicles, a software problem could cause the rearview camera image not to display or to freeze when the transmission is shifted into reverse.  Safety Risk: A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.  Corrective Actions: Ford will notify owners by mail and send a wireless over\-the\-air software update to eligible vehicles to update the SYNC software. Alternatively, you may schedule an appointment to have the update performed at a Ford dealership.
- [2025141](/recalls/tc/2025141.md), 2025-03-14: Visual System. Issue: On certain vehicles, the recall repairs completed by a Ford dealer during recall 22S14 \(Transport Canada recall no. 2022\-117\) may not have been done correctly. As a result, a second repair is required.  On certain vehicles, a software problem could cause the rearview camera to display a blank or distorted image.  Safety Risk: A rearview camera image that does not display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.  Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the SYNC 4 module software.
- [2022117](/recalls/tc/2022117.md), 2022-03-14: Visual System. Issue: On certain vehicles, a software problem could cause the rearview camera to display a blank or distorted image.  Safety Risk: A rearview camera image that does not display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.  Corrective Actions: Ford will notify owners by mail and send a wireless over\-the\-air software update to each vehicle. Alternatively, you may schedule an appointment to have the update performed at a Ford dealer.

## Check a VIN

- [NHTSA recall lookup by VIN, United States](https://www.nhtsa.gov/recalls)
- [Transport Canada recall search, Canada](https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng)

Contains information licensed under the Open Government Licence – Canada.

JSON: [/v1/vehicles/2022_ford_edge/recalls](/v1/vehicles/2022_ford_edge/recalls)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%202022%20Ford%20Edge&page=https%3A%2F%2Fopen.wenmarpro.com%2Fmakes%2Fford%2Fedge%2F2022%2Frecalls&vehicle=2022%20Ford%20Edge)