# P1626 on the 2025 Dodge Charger

The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.

This code is specific to a manufacturer and is not described here.

## Bulletins for this model year that name P1626

- [11030004](https://open.wenmarpro.com/bulletins/11030004), 2026-03-13: Flash: Motor Control Processor A \(MCP A\) Updates 6B3 Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes \(DTCs\): ● P1E18\-00 \- Internal Control Module Electronic Park Performance. ● P1625\-00 \- Park Pawl System Failure. ● P0A78\-00 \- Drive Motor A Inverter Performance. ● P0A79\-00 \- Drive Motor B Inverter Performance. ● P1626\-00 \- Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Vehicle not shutting off and a draining 12V battery. ● Vehicle no start. ● Wrench icon is illuminated on the Instrument Panel Cluster \(IPC\). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
- [11030003](https://open.wenmarpro.com/bulletins/11030003), 2026-03-13: Flash: Motor Control Processor B \(MCP B\) Updates 6B3 Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes \(DTCs\): ● P1E18\-00 \- Internal Control Module Electronic Park Performance. ● P1625\-00 \- Park Pawl System Failure. ● P0A78\-00 \- Drive Motor A Inverter Performance. ● P0A79\-00 \- Drive Motor B Inverter Performance. ● P1626\-00 \- Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Vehicle not shutting off and a draining 12V battery. ● Vehicle no start. ● Wrench icon is illuminated on the Instrument Panel Cluster \(IPC\). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
- [11026765](https://open.wenmarpro.com/bulletins/11026765), 2025-12-23: Flash: Motor Control Processor A \(MCP A\) Updates 6B3 Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes \(DTC\)s: ● \*\*P1E18\-00 \- Internal Control Module Electronic Park Performance. ● P1625\-00 \- Park Pawl System Failure. ● P0A78\-00 \- Drive Motor A Inverter Performance. ● P0A79\-00 \- Drive Motor B Inverter Performance.\*\* ● P1626\-00 \- Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● \*\*Vehicle not shutting off and a draining 12V battery. ● Vehicle no start.\*\* ● Wrench icon is illuminated on the Instrument Panel Cluster \(IPC\). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine
- [11026762](https://open.wenmarpro.com/bulletins/11026762), 2025-12-23: Flash: Motor Control Processor B \(MCP B\) Updates 6B3 Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code \(DTC\): ● \*\*P1E18\-00 \- Internal Control Module Electronic Park Performance. ● P1625\-00 \- Park Pawl System Failure. ● P0A78\-00 \- Drive Motor A Inverter Performance. ● P0A79\-00 \- Drive Motor B Inverter Performance.\*\* ● P1626\-00 \- Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● \*\*Vehicle not shutting off and a draining 12V battery. ● Vehicle no start.\*\* ● Wrench icon is illuminated on the Instrument Panel Cluster \(IPC\). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routin
- [11020732](https://open.wenmarpro.com/bulletins/11020732), 2025-07-17: Flash: Motor Control Processor A \(MCP A\) Updates 6A2 Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code \(DTC\): ● P1626\-00 \- Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster \(IPC\). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine
- [11020730](https://open.wenmarpro.com/bulletins/11020730), 2025-07-17: Flash: Motor Control Processor B \(MCP B\) Updates 6A2 Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code \(DTC\): ● P1626\-00 \- Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster \(IPC\). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
- [11018100](https://open.wenmarpro.com/bulletins/11018100), 2025-05-07: "Flash: Motor Control Processor B \(MCP B\) Updates 6A1 Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code \(DTC\): ● P1626\-00 \- Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster \(IPC\). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park This bulletin involves reprogramming the \*\*IDCM,\*\* BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine."
- [11018088](https://open.wenmarpro.com/bulletins/11018088), 2025-05-07: "Flash: Motor Control Processor A \(MCP A\) Updates 6A1 Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code \(DTC\): ● P1626\-00 \- Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster \(IPC\). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park This bulletin involves reprogramming the \*\*IDCM,\*\* BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine."
- [11018063](https://open.wenmarpro.com/bulletins/11018063), 2025-05-07: "RSU With Additional Sleep Cycles for HV Battery Integrity Check \- Flash: Motor Control Processor B \(MCP B\) Updates 6A1 Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code \(DTC\): ● P1626\-00 \- Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster \(IPC\). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the \*\*IDCM,\*\* BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine"
- [11018059](https://open.wenmarpro.com/bulletins/11018059), 2025-05-07: "RSU With Additional Sleep Cycles for HV Battery Integrity Check \- Flash: Motor Control Processor B \(MCP B\) Updates 6A1 Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code \(DTC\): ● P1626\-00 \- Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster \(IPC\). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the \*\*IDCM,\*\* BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine"