P1626 on the 2025 Dodge Charger
The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.
This code is specific to a manufacturer and is not described here. Its meaning is in the manufacturer's service information.
| 08-097-26 | 2026-03-13. Service bulletin. Flash: Motor Control Processor A (MCP A) Updates 6B3 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance. ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Vehicle not shutting off and a draining 12V battery. ● Vehicle no start. ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine. |
|---|---|
| 08-096-26 | 2026-03-13. Service bulletin. Flash: Motor Control Processor B (MCP B) Updates 6B3 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance. ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Vehicle not shutting off and a draining 12V battery. ● Vehicle no start. ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine. |
| 08-027-25 REV. D | 2025-12-23. Service bulletin. Flash: Motor Control Processor A (MCP A) Updates 6B3 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTC)s: ● **P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance.** ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● **Vehicle not shutting off and a draining 12V battery. ● Vehicle no start.** ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine |
| 08-024-25 REV. D | 2025-12-23. Service bulletin. Flash: Motor Control Processor B (MCP B) Updates 6B3 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● **P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance.** ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● **Vehicle not shutting off and a draining 12V battery. ● Vehicle no start.** ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routin |
| 08-027-25 REV. C | 2025-07-17. Service bulletin. Flash: Motor Control Processor A (MCP A) Updates 6A2 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine |
| 08-024-25 REV. C | 2025-07-17. Service bulletin. Flash: Motor Control Processor B (MCP B) Updates 6A2 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine. |
| 08-024-25 REV.B | 2025-05-07. Service bulletin. "Flash: Motor Control Processor B (MCP B) Updates 6A1 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park This bulletin involves reprogramming the **IDCM,** BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine." |
| 08-027-25 REV. B | 2025-05-07. Service bulletin. "Flash: Motor Control Processor A (MCP A) Updates 6A1 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park This bulletin involves reprogramming the **IDCM,** BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine." |
| 08-079-25 REV. A | 2025-05-07. Service bulletin. "RSU With Additional Sleep Cycles for HV Battery Integrity Check - Flash: Motor Control Processor B (MCP B) Updates 6A1 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the **IDCM,** BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine" |
| 08-080-25 REV. A | 2025-05-07. Service bulletin. "RSU With Additional Sleep Cycles for HV Battery Integrity Check - Flash: Motor Control Processor B (MCP B) Updates 6A1 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the **IDCM,** BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine" |
17 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.