WenmarOpen by Wenmar Pro

Service bulletins for the 2025 Dodge Charger

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

268 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
S1408000384 REV.J2026-03-13. Service bulletin. ELECTRICAL SYSTEM. Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
1106082026-03-13. Service bulletin. ELECTRICAL SYSTEM. SPEAKER - NONE
08-103-262026-03-13. Service bulletin. ELECTRICAL SYSTEM. Flash: Integrated Dual Charging Module (IDCM) Updates 6A3 Customers may comment on one or more of the following: SYMPTOM: ● 12 volt battery lamp on the Instrument Panel Cluster (IPC) illuminated due to depleted 12 volt battery. ● Unable to charge at High Voltage Charging station at Level-1, Level-2 or DC Fast Charge. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
08-097-262026-03-13. Service bulletin. ELECTRICAL SYSTEM. Flash: Motor Control Processor A (MCP A) Updates 6B3 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance. ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Vehicle not shutting off and a draining 12V battery. ● Vehicle no start. ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
08-096-262026-03-13. Service bulletin. ELECTRICAL SYSTEM. Flash: Motor Control Processor B (MCP B) Updates 6B3 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance. ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Vehicle not shutting off and a draining 12V battery. ● Vehicle no start. ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
08-095-262026-03-13. Service bulletin. ELECTRICAL SYSTEM. Flash: Electronic Vehicle Control Unit (EVCU) Updates 6B3 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C10FA-00 - Wheel Hub disconnect Actuator Performance Left. ● C10FB-00 - Wheel Hub disconnect Actuator Performance Right. ● C10F8-00 - Left Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● C10F9-00 - Right Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● P061B-00 - Internal Control Module Torque Calculation Performance. Customers may also comment on one or more of the following: ● Will not be able to start the vehicle. ● 12V battery dead resulting in no start. ● Loss of communication between EVCU and BPCM can prevent high-voltage contactors from closing, resulting in a no-start condition. ● Powershot sometimes stuck at 0 seconds remaining which makes customer believe that Powershot is not working. ● Remote start functionality fails when the vehicle is actively charging "Charge Now" feature in app - multiple issues. ● Sometimes fails and does not close contactors, sometimes starts but CPIM lights are not commanded by EVCU and sets B12B4. ● WED closure at zero speed in case of miss at normal close speed. ● Drive-by-brake HMI message update to IPC in case of Limp Home mode. ● DTC U0594 setting after pedal learn (applicable only for plant). ● Instrument Panel Cluster (IPC), radio range and charge time estimations and messages are not correct. ● Battery range incorrect. ● Improved battery State of Charge (SoC) accuracy in off-nominal conditions. ● Battery heating values incorrect on radio when on Performance Pages display. ● Charging does not start when plugged in. ● Charging is not indicating when battery is at full charge. ● Charging slow or takes too long. ● Bumps and jerks while accelerating or decelerating. ● Wrench icon is illuminated on the IPC. ● Turtle icon is illumina
08-094-262026-03-13. Service bulletin. ELECTRICAL SYSTEM. Flash: Battery Pack Control Module (BPCM) Updates 6B3 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set one or more the following Diagnostic Trouble Codes (DTCs): ● P0AA7-00 - Hybrid/EV Battery Pack "A" Voltage Isolation Sensor. ● P1614-00 - ECU Reset/Recovery Occurred. ● B1A8A-00 - Multi-Module VIN Handshake Failure. ● P1CDB-00 - Hybrid/EV Wakeup Control 1 Output Circuit Short To Battery. ● P1E25-00 - EV Battery Failure Level 2. ● P0D10-00 - Hybrid/EV Battery Negative Contactor A Stuck Open. ● P0D09-00 - Hybrid/EV Battery Positive Contactor A Stuck Open. ● P0DE6-00 - Hybrid/EV Battery Pack Cell Voltage Low. NOTE: Active or stored. ● P1DAF - Incompatible Limp In Action Requested. NOTE: Active or stored. ● P1CDE-00 – Hybrid/EV Wakeup Control 2 Output Circuit Short to Ground. ● P1CDA-00 – Hybrid/EV Wakeup Control 1 Output Circuit/Open. ● U00C6-00 – Lost Communication With AIR Pressure Sensor. ● P0F00-00 - Hybrid/EV Battery Module 1 Performance. ● P0F01-00 - Hybrid/EV Battery Module 2 Performance. ● P0F02-00 - Hybrid/EV Battery Module 3 Performance. ● P0F03-00 - Hybrid/EV Battery Module 4 Performance. ● P0F04-00 - Hybrid/EV Battery Module 5 Performance. ● P0F05-00 - Hybrid/EV Battery Module 6 Performance. ● P0F06-00 - Hybrid/EV Battery Module 7 Performance. ● P0F07-00 - Hybrid/EV Battery Module 8 Performance. ● P0F08-00 - Hybrid/EV Battery Module 9 Performance. ● P0F09-00 - Hybrid/EV Battery Module 10 Performance. ● P0F0A-00 - Hybrid/EV Battery Module 11 Performance. ● P0F0B-00 - Hybrid/EV Battery Module 12 Performance. ● P0F0C-00 - Hybrid/EV Battery Module 13 Performance. ● P0CA6-00 - Hybrid/EV Battery Charging Current High. B08 FSAR-RSU-7111 -2- NOTE: If the following DTCs are present/active in the BPCM, Battery Pack replacement will be required. Guided Diagnostics will prompt you for the repair action if the diagnostic is present on the vehicle. ● P0ADB-00 - Hybrid/EV Battery Positive Contractor A Contr
S228A000025 REV.A2026-03-05. Service bulletin. ELECTRICAL SYSTEM. Harman R1H Uconnect 5 Radio Software Flash Error Codes
9100591 Rev 12026-03-05. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. Universal Garage Door Opener Prior to replacing the UGDO or sun visor, call HomeLink® Customer Care at 1-800-355-3515 for a proper evaluation of the issue. If this does not correct the issue, please follow the steps in SOL: S2508000039
S1408000384 REV.I2026-02-19. Service bulletin. ELECTRICAL SYSTEM. Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
S2508000036 REV.B2026-02-19. Service bulletin. AIR BAGS; ELECTRICAL SYSTEM. The Occupant Restraint Controller (ORC) Sets B2204-00 DTC In an Unknown Status (Pending), Sets B2204-00 ECU Configuration Mismatch Or/And DTC B222D-00 Active for ECU Unable to Configure/Configuration Not Learned
S26230000062026-02-19. Service bulletin. ELECTRICAL SYSTEM. Washer Fluid Warning Lamp Illuminated When Reservoir Is Full
1092862026-02-12. Service bulletin. ELECTRICAL SYSTEM. MOTOR - ELECTRIC
S2308000120 REV.F2026-02-12. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. Rain Sensing Auto Wipers and Auto on Head Lamps Inoperative. Rain Sensor Internal Failure.
S2508000002 REV.D2026-02-04. Service bulletin. ELECTRICAL SYSTEM. Mapping Interface Module (MIM) Erroneously Sets Diagnostic Trouble Codes (DTCs) B023C-49 and or U115C-00
08-016-262026-01-28. Service bulletin. ELECTRICAL SYSTEM; SEATS. Flash: Occupant Restraint Controller (ORC) Software Update Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● U12B3-00 - Lost Communication With Occupant Restraint Controller (ORC). ● U0151-00 - Lost Communication With Occupant Restraint Controller (ORC). ● B273C-00 - Digital Crash Input. Customers may experience the following: ● The vehicle will not be able to shift out of Park and is unable to be driven. This bulletin involves updating the ORC with the latest available software.
S26050000012026-01-21. Service bulletin. SERVICE BRAKES; ELECTRICAL SYSTEM. Antilock Brake System (ABS) Light On. Wheel Speed Related Diagnostic Trouble Codes (DTCs) Set.
S2308000120 REV.E2026-01-21. Service bulletin. ELECTRICAL SYSTEM. Rain Sensing Auto Wipers and Auto on Head Lamps Inoperative. Rain Sensor Internal Failure.
08-003-262026-01-14. Service bulletin. ELECTRICAL SYSTEM. DXR USB Update to v1.4.160 For Mapping Interface Module (MIM) Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● B023C-49 - Dashcam Module 1-Internal Electronic Failure. ● U115C-00 - Lost Communication With ETM. The customer may describe the following: ● Blinking odometer (remains accurate This bulletin involves inspecting and possibly performing two MIM updates. One is a via the DXR USB port and guided through the DXR radio app. The second is a .efd flash via the wiTECH tool
S2508000056 REV.A2025-12-23. Service bulletin. ELECTRICAL SYSTEM. 12v Ignition Off Draw (IOD) Caused By Power Electronics Coolant Pump 1 (PECP-1) Continuously Running When Vehicle Is Asleep
91007462025-12-23. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. B1578 DTC active (Audio Antenna Circuit Resistance Below Threshold) in LB production vehicles. Do not diagnose stored or active DTC unless there is a customer facing issue noted. A SOL will be released to give further information.
91007472025-12-23. Service bulletin. ELECTRICAL SYSTEM. B1578 DTC active (Audio Antenna Circuit Resistance Below Threshold) in LB production vehicles. Do not diagnose stored or active DTC unless there is a customer facing issue noted. A SOL will be released to give further information.
08-412-252025-12-23. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Flash: Driver Door Latch Module (DDLM) and Passenger Door Latch Module (PDLM) Updates Customers may experience one or more of the following: ● Door glass does not drop when opening the door. ● Multiple presses required for passive entry unlock. This bulletin involves reprogramming the DDLM and PDLM with the latest available software.
08-133-25 REV. B2025-12-23. Service bulletin. ELECTRICAL SYSTEM. Flash: Integrated Dual Charging Module (IDCM) Updates 6A3 Customers may comment on one or more of the following: ● 12 volt battery lamp on the Instrument Panel Cluster (IPC) illuminated due to depleted 12 volt battery. ● Unable to charge at High Voltage Charging station at Level-1, Level-2 or DC Fast Charg This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routin
08-028-25 REV. D2025-12-23. Service bulletin. ELECTRICAL SYSTEM. Flash: Electronic Vehicle Control Unit (EVCU) Updates 6B3 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C10FA-00 - Wheel Hub disconnect Actuator Performance Left. ● C10FB-00 - Wheel Hub disconnect Actuator Performance Right. ● C10F8-00 - Left Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● C10F9-00 - Right Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● P061B-00 - Internal Control Module Torque Calculation Performance. Customers may also comment on one or more of the following: ● **Will not be able to start the vehicle. ● 12V battery dead resulting in no start. ● Loss of communication between EVCU and BPCM can prevent high-voltage contactors from closing, resulting in a no-start condition. ● Powershot sometimes stuck at 0 seconds remaining which makes customer believe that Powershot is not working. ● Remote start functionality fails when the vehicle is actively charging "Charge Now" feature in app - multiple issues. ● Sometimes fails and does not close contactors, sometimes starts but CPIM lights are not commanded by EVCU and sets B12B4. ● WED closure at zero speed in case of miss at normal close speed. ● Drive-by-brake HMI message update to IPC in case of Limp Home mode. ● DTC U0594 setting after pedal learn (applicable only for plant).** ● Instrument Panel Cluster (IPC), radio range and charge time estimations and messages are not correct. ● Battery range incorrect. ● Improved battery State of Charge (SoC) accuracy in off-nominal conditions. ● Battery heating values incorrect on radio when on Performance Pages display. ● Charging does not start when plugged in. ● Charging is not indicating when battery is at full charge. ● Charging slow or takes too long. ● Bumps and jerks while accelerating or decelerating. ● Wrench icon is illuminated on the IPC. ● Turtle icon is illuminated on the IPC. ● Vehicle enters into limp home mode. In addition, the following software enhancements are also available: ● **Drive-by-brake improvements and an issue resolved where the vehicle incorrectly enters turtle mode while driving. ● Closed loop 12V silent charging which can help mitigate the 12V drain issue on the vehicle.** ● Enables compatibility with the Flo V3 Chargers

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.