# Service bulletins for the 2011 Dodge Charger

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

152 bulletins from NHTSA, as of 2026-10-19.

- [108463](/bulletins/11025727.md), 2025-11-26, Service bulletin: SERVICE BRAKES. PAD KIT \- REAR DISC BRAKE, FRONT DISC BRAKE
- [108464](/bulletins/11025724.md), 2025-11-26, Service bulletin: SERVICE BRAKES. PAD KIT \- REAR DISC BRAKE, FRONT DISC BRAKE
- [9100226](/bulletins/10248509.md), 2024-01-08, Service bulletin: ELECTRICAL SYSTEM. Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- [9003357A](/bulletins/10247906.md), 2024-01-02, Service bulletin: ENGINE AND ENGINE COOLING. ADAPTER, Engine Oil Filter \(Pentastar V6\) For all 2014MY replace the Oil Filter Adapter \(OFA\). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1\) Remove OFA 2\) Replace only the oil inlet O\-ring and gaskets \(seals kit in SOL above\). 3\) Re\-install the OFA. For 2023MY and beyond use black O\-ring. For 2022MY and prior use red O\-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- [9003357](/bulletins/10247905.md), 2024-01-02, Service bulletin: BACK OVER PREVENTION. ADAPTER, Engine Oil Filter \(Pentastar V6\) For all 2014MY replace the Oil Filter Adapter \(OFA\). For any other MY \(with mileage above 30,000\) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1\) Remove OFA 2\) Replace only the oil inlet O\-ring and gaskets \(seals kit in SOL above\). 3\) Re\-install the OFA. For 2023MY and beyond use black O\-ring. For 2022MY and prior use red O\-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- [9100226](/bulletins/10244348.md), 2023-10-30, Service bulletin: ELECTRICAL SYSTEM:WIRING. Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- [9100196](/bulletins/10242717.md), 2023-09-25, Service bulletin: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
- [0815223](/bulletins/10241118.md), 2023-08-21, Service bulletin: ELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE. Fuel Pump Connector Replacement The technician may experience a crank/no start after the fuel pump module was replaced. This bulletin involves replacing the fuel pump connector harness \(pigtail\) when replacing the fuel pump module.
- [9003357a](/bulletins/10234379.md), 2023-04-17, Service bulletin: ENGINE AND ENGINE COOLING. ADAPTER, Engine Oil Filter \(Pentastar V6\) For all 2014MY replace the Oil Filter Adapter \(OFA\). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1\) Remove OFA 2\) Replace only the oil inlet O\-ring and gaskets \(seals kit in SOL above\). 3\) Re\-install the OFA. For 2023MY and beyond use black O\-ring. For 2022MY and prior use red O\-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- [9003357](/bulletins/10234378.md), 2023-04-17, Service bulletin: ENGINE AND ENGINE COOLING. ADAPTER, Engine Oil Filter \(Pentastar V6\) For all 2014MY replace the Oil Filter Adapter \(OFA\). For any other MY \(with mileage above 30,000\) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1\) Remove OFA 2\) Replace only the oil inlet O\-ring and gaskets \(seals kit in SOL above\). 3\) Re\-install the OFA. For 2023MY and beyond use black O\-ring. For 2022MY and prior use red O\-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- [0200814](/bulletins/10231971.md), 2023-02-21, Service bulletin: SUSPENSION. This bulletin involves replacing both the left and right side front tension struts.
- [0200714](/bulletins/10231970.md), 2023-02-21, Service bulletin: SUSPENSION. This bulletin involves replacing the left side or the right side or both side tension struts.
- [0900214](/bulletins/10229945.md), 2023-01-17, Service bulletin: ENGINE AND ENGINE COOLING. MIL Illumination: P0300, P0302, P0304 or P0306 \(X56 Warranty Extension\)
- [0900214a](/bulletins/10229899.md), 2023-01-17, Service bulletin: ENGINE AND ENGINE COOLING. MIL Illumination: P0300, P0302, P0304 or P0306 \(X56 Warranty Extension\) This bulletin involves checking for excessive cylinder leakage and replacing the cylinder head if necessary. Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the Technician may find that any the following Diagnostic Trouble Codes have been set: P0300\- Multiple Cylinder Misfire P0302\- Cylinder 2 Misfire P0304\- Cylinder 4 Misfire P0306\- Cylinder 6 Misfire
- [9003081](/bulletins/10229871.md), 2023-01-17, Service bulletin: ELECTRICAL SYSTEM. Dielectric Grease This product is no longer approved for use on ignition coil and spark plug boots. Current plug boot material\(silicone\) is not compatible with this grease and can cause deterioration over time.
- [3100122](/bulletins/10229572.md), 2023-01-09, Service bulletin: STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding \(STRSW\) and Gas Metal Arc Welding \(GMAW\) processes when welding steel body panels and structural components.
- [2301815](/bulletins/10229242.md), 2023-01-09, Service bulletin: EQUIPMENT. This bulletin involves modification or replacement of the backlite rear shelf
- [S1709000010](/bulletins/10229031.md), 2023-01-09, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear \(roller failure\) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- [V51](/bulletins/10228020.md), 2022-12-19, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); UNKNOWN OR OTHER. Customer Satisfaction Notification V51 Reprogram Powertrain Control Module
- [S2209000004](/bulletins/10227983.md), 2022-12-19, Service bulletin: EQUIPMENT; ENGINE AND ENGINE COOLING. If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
- [Parts\-3](/bulletins/10226286.md), 2022-11-21, Service bulletin: STEERING. Steering Column.
- [3100122](/bulletins/10225424.md), 2022-10-31, Service bulletin: STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding \(STRSW\) and Gas Metal Arc Welding \(GMAW\) processes when welding steel body panels and structural components.
- [3100122](/bulletins/10225287.md), 2022-10-31, Service bulletin: STRUCTURE:INTERIOR PANELS:DOOR; STRUCTURE; UNKNOWN OR OTHER. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding \(STRSW\) and Gas Metal Arc Welding \(GMAW\) processes when welding steel body panels and structural components.
- [9002887](/bulletins/10223599.md), 2022-10-17, Service bulletin: ENGINE AND ENGINE COOLING. Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.\~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.\~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- [S2008000113](/bulletins/10221813.md), 2022-09-26, Service bulletin: UNKNOWN OR OTHER; ELECTRICAL SYSTEM:IGNITION. No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle

More: [the next page](/v1/vehicles/2011_dodge_charger/bulletins?cursor=2022-09-26_10221813) (JSON)

JSON: [/v1/vehicles/2011_dodge_charger/bulletins](/v1/vehicles/2011_dodge_charger/bulletins)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%202011%20Dodge%20Charger&page=https%3A%2F%2Fopen.wenmarpro.com%2Fmakes%2Fdodge%2Fcharger%2F2011%2Fbulletins&vehicle=2011%20Dodge%20Charger)