WenmarOpen by Wenmar Pro

Service bulletins for the 2023 Dodge Challenger

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

161 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
90033572023-04-17. Service bulletin. ENGINE AND ENGINE COOLING. ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
S23230000022023-02-13. Service bulletin. EQUIPMENT:ELECTRICAL. Washer Light On And Will Not Turn Off After Adding Washer Solvent.
91001182023-02-13. Service bulletin. TRAILER HITCHES; BACK OVER PREVENTION. DRIER Receiver,COMPRESSOR Air Conditioning Engineering is seeking more information about AC Compressor noise issues. For the vehicle AC Compressor and Receiver Drier noise and/or no AC, call Stellantis Engineering for further instructions. Technician can contact FCA Redacted Content If there is no answer within 15 minutes, please proceed with the repair.
91001052023-01-17. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY. Seal, Sunroof
91001042023-01-17. Service bulletin. ELECTRICAL SYSTEM. SENSOR Intrusion Module
91001032023-01-17. Service bulletin. ENGINE AND ENGINE COOLING. Engine Oil - 0W20,Fluid - ATF+4,Engine Oil - 10W30,Engine Oil - 5W20,Engine Oil - 5W30
31-002-222023-01-17. Service bulletin. STRUCTURE. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
08-228-222023-01-17. Service bulletin. ELECTRICAL SYSTEM. Flash: Security Gateway Module (SGW) Updates This bulletin involves reprogramming the SGW with the latest available software to enable High Octane functionality for vehiclesthat have installed the Direct Connection Stage Kits. For customers that have the Direct Connection Redeye Stage I and Stage II kits installed on their vehicle, this flash is requiredto enable functionality of the High Octane Mode.
31001222022-10-31. Service bulletin. STRUCTURE:INTERIOR PANELS:DOOR; STRUCTURE; UNKNOWN OR OTHER. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
9004440 Rev. A2021-12-13. Service bulletin. LATCHES/LOCKS/LINKAGES:DOORS:LATCH. LATCH, Front Door If the vehicle condition is related to the door window smart glass operation or window not lowering when the outside door handle is actuated latch replacement may be unneccessary. please contact the following individual prior to servicing the vehicle FCA Redacted Content There is a simple door handle to latch adjustment specified in the latch installation service procedure. 23 - Body / Doors - Front / LATCH, Door / Installation. The handle/latch/window switch adjustment is specified in steps 7 through 9.
90044402021-12-13. Service bulletin. LATCHES/LOCKS/LINKAGES:DOORS:LATCH. LATCH, Front Door If the vehicle condition is related to the door window smart glass operation or window not lowering when the outside door handle is actuated latch replacement may be uneccessary. There is a simple door handle to latch adjustment specified in the latch installation service procedure. 23 - Body / Doors - Front / LATCH, Door / Installation. The handle/latch/window switch adjustment is specified in steps 7 through 9.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.