# P0456 on the 2019 Dodge Challenger

The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.

Nobody has written a description of this code yet.

## Bulletins for this model year that name P0456

- [11012186](https://open.wenmarpro.com/bulletins/11012186), 2025-01-03: "Flash: Powertrain Control Module \(PCM\) Updates Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes \(DTCs\): ● \*\*P0420 \- Catalyst System Efficiency Below Threshold Bank 1. ● P0430 \- Catalyst System Efficiency Below Threshold Bank 2.\*\* ● P0456 \- EVAP System Small Leak. NOTE: If DTC P0456 is present use the wiTECH Small Leak Verification test \(SLVT\) to determine if a leak is present in the system. This bulletin involves reprogramming the PCM with the latest available software."
- [10236933](https://open.wenmarpro.com/bulletins/10236933), 2023-05-30: wiTECH Small Leak Verification Test \(SLVT\) \- P0456\-EVAP SYSTEM SMALL LEAK
- [10229173](https://open.wenmarpro.com/bulletins/10229173), 2023-01-09: Flash: Powertrain Control Module \(PCM\) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 \- EVAP Pressure Switch Stuck Closed. P0455 \- EVAP System Large Leak. P0440 \- General EVAP System Failure. P0456 \- EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test \(SLVT\) to determine if a leak is present in the system. Customers may also experience the following:Vehicle willfail to start when cold at times. Noise heard from the drivetrain while stationary and vehicle is in Sport/Trackmodes. Extended engine crank times.
- [10229172](https://open.wenmarpro.com/bulletins/10229172), 2023-01-09: Flash: Powertrain Control Module \(PCM\) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 \- EVAP Pressure Switch Stuck Closed. P0455 \- EVAP System Large Leak. P0440 \- General EVAP System Failure. P0456 \- EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test \(SLVT\) to determine if a leak is present in the system. Customers may also experience one or more of the following: Vehicle will fail to start when cold at times. Noise heard from the drivetrain while stationary and vehicle is in Sport/Trackmodes. Extended engine crank times.
- [10228027](https://open.wenmarpro.com/bulletins/10228027), 2022-12-19: Flash: Powertrain Control Module \(PCM\) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 \- EVAP Pressure Switch Stuck Closed. P0455 \- EVAP System Large Leak. P0440 \- General EVAP System Failure. P0456 \- EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak VerificationTest \(SLVT\) to determine if a leak is present in the system. Customers may also comment on one or more of the following: Vehicle will fail to start when cold at times. Noise heard from the drivetrain while stationary and vehicle is in Sport/Track modes.
- [10223211](https://open.wenmarpro.com/bulletins/10223211), 2022-10-17: Flash: Powertrain Control Module \(PCM\) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 \- EVAP Pressure Switch Stuck Closed. P0455 \- EVAP System Large Leak. P0440 \- General EVAP System Failure. P0456 \- EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test \(SLVT\) to determine if a leak is present in the system. Customers may also experience the following:Vehicle willfail to start when cold at times. Noise heard from the drivetrain while stationary and vehicle is in Sport/Trackmodes. Extended engine crank times.
- [10223210](https://open.wenmarpro.com/bulletins/10223210), 2022-10-17: Flash: Powertrain Control Module \(PCM\) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 \- EVAP Pressure Switch Stuck Closed. P0455 \- EVAP System Large Leak. P0440 \- General EVAP System Failure. P0456 \- EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test \(SLVT\) to determine if a leak is present in the system. Customers may also experience one or more of the following: Vehicle will fail to start when cold at times. Noise heard from the drivetrain while stationary and vehicle is in Sport/Trackmodes. Extended engine crank times.
- [10220829](https://open.wenmarpro.com/bulletins/10220829), 2022-09-26: Flash: Powertrain Control Module \(PCM\) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 \- EVAP Pressure Switch Stuck Closed. P0455 \- EVAP System Large Leak. P0440 \- General EVAP System Failure. P0456 \- EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test \(SLVT\) to determine if a leak is present in the system. Customers may also experience the following:Vehicle willfail to start when cold at times. Noise heard from the drivetrain while stationary and vehicle is in Sport/Trackmodes. Extended engine crank times.
- [10220828](https://open.wenmarpro.com/bulletins/10220828), 2022-09-26: Flash: Powertrain Control Module \(PCM\) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 \- EVAP Pressure Switch Stuck Closed. P0455 \- EVAP System Large Leak. P0440 \- General EVAP System Failure. P0456 \- EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test \(SLVT\) to determine if a leak is present in the system. Customers may also experience one or more of the following: Vehicle will fail to start when cold at times. Noise heard from the drivetrain while stationary and vehicle is in Sport/Trackmodes. Extended engine crank times.
- [10220071](https://open.wenmarpro.com/bulletins/10220071), 2022-09-15: wiTECH Small Leak Verification Test \(SLVT\) \- P0456\-EVAP SYSTEM SMALL LEAK