# Service bulletins for the 2010 Dodge Challenger

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

52 bulletins from NHTSA, as of 2026-10-19.

- [9100226](/bulletins/10248509.md), 2024-01-08, Service bulletin: ELECTRICAL SYSTEM. Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- [9100226](/bulletins/10244348.md), 2023-10-30, Service bulletin: ELECTRICAL SYSTEM:WIRING. Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- [9100196](/bulletins/10242717.md), 2023-09-25, Service bulletin: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
- [0815223](/bulletins/10241118.md), 2023-08-21, Service bulletin: ELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE. Fuel Pump Connector Replacement The technician may experience a crank/no start after the fuel pump module was replaced. This bulletin involves replacing the fuel pump connector harness \(pigtail\) when replacing the fuel pump module.
- [2102016](/bulletins/10228120.md), 2022-12-19, Service bulletin: EQUIPMENT; BACK OVER PREVENTION; POWER TRAIN. Manual Transmission Shifter Noise This bulletin involves greasing or replacing the manual transmission rear shifter bushing. Customers may experience a clunk, squeak, or similar noise heard from center console area while shifting.
- [S2209000004](/bulletins/10227983.md), 2022-12-19, Service bulletin: EQUIPMENT; ENGINE AND ENGINE COOLING. If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
- [9002887](/bulletins/10223599.md), 2022-10-17, Service bulletin: ENGINE AND ENGINE COOLING. Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.\~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.\~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- [9004009](/bulletins/10221097.md), 2022-09-26, Service bulletin: POWER TRAIN. Transmission Kit with Torque Converter 1. All Promaster \(VF\) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners \(Part Number 06511385A$\) are one\-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both \(2\) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code\(s\) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- [9004361](/bulletins/10220843.md), 2022-09-26, Service bulletin: POWER TRAIN. NAG1 Transmission Before installing the transmission with the engine, check for dowel pins \(2\) for alignment. If the pins are missing request to add the dowel pin first and then install the transmission
- [S1709000010RevB](/bulletins/10220687.md), 2022-09-26, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR; UNKNOWN OR OTHER. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear \(roller failure\) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- [3100519](/bulletins/10220101.md), 2022-09-15, Service bulletin: STRUCTURE. Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- [3100319](/bulletins/10220099.md), 2022-09-15, Service bulletin: STRUCTURE. Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- [3100419](/bulletins/10220098.md), 2022-09-15, Service bulletin: VISIBILITY. Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
- [3100619](/bulletins/10220097.md), 2022-09-15, Service bulletin: STRUCTURE; EQUIPMENT. Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- [09\-001\-13](/bulletins/10216395.md), 2022-07-25, Service bulletin: SEATS. Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
- [08\-035\-13](/bulletins/10215988.md), 2022-07-18, Service bulletin: ELECTRICAL SYSTEM. Flash: SRT Subwoofer Thump Noise After Vehicle Is Turned Off This bulletin involves re\-flashing the Amplifier with updated software. The customer may experience after the vehicle is turned off a slow thumping noise coming from the subwoofer. This may happen only a few times or last until the next key cycle. This is caused by the amplifier waking up and then going back to sleep.
- [18\-021\-13](/bulletins/10215982.md), 2022-07-18, Service bulletin: ELECTRICAL SYSTEM; POWER TRAIN. Flash: Performance Derate Above 55 MPH Immediately After Start\-Up When Accelerating At Wide Open Throttle This bulletin involves selectively erasing and reprogramming the Powertrain Control Module \(PCM\) with new software. A small number of customers may experience any of the following conditions: Performance derate above 55 MPH when accelerating at wide open throttle immediately following engine start\-up.
- [S1709000010 Rev.](/bulletins/10215879.md), 2022-07-18, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear \(roller failure\) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- [S1709000010 RevB](/bulletins/10212290.md), 2022-05-31, Service bulletin: ENGINE AND ENGINE COOLING; ENGINE. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear \(roller failure\) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- [9004509](/bulletins/10212248.md), 2022-05-31, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:FILTER/SCREEN. Oil Filter If a Mopar Oil Filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold
- [9004361](/bulletins/10190590.md), 2021-04-26, Service bulletin: POWER TRAIN. NAG1 Transmission Before installing the transmission with the engine, check for dowel pins \(2\) for alignment. If the pins are missing request to add the dowel pin first and then install the transmission
- [08\-035\-13](/bulletins/10188683.md), 2021-03-15, Service bulletin: EQUIPMENT:ELECTRICAL; EQUIPMENT:APPLIANCE:TV/RADIO/SPEAKERS. Flash: SRT Subwoofer Thump Noise After Vehicle Is Turned Off This bulletin involves re\-flashing the Amplifier with updated software. The customer may experience after the vehicle is turned off a slow thumping noise coming from the subwoofer. This may happen only a few times or last until the next key cycle. This is caused by the amplifier waking up and then going back to sleep.
- [18\-021\-13](/bulletins/10188677.md), 2021-03-15, Service bulletin: ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); ENGINE AND ENGINE COOLING. Flash: Performance Derate Above 55 MPH Immediately After Start\-Up When Accelerating At Wide Open Throttle This bulletin involves selectively erasing and reprogramming the Powertrain Control Module \(PCM\) with new software. A small number of customers may experience any of the following conditions: Performance derate above 55 MPH when accelerating at wide open throttle immediately following engine start\-up.
- [S1709000010 Rev.](/bulletins/10187058.md), 2021-02-16, Service bulletin: ENGINE AND ENGINE COOLING. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear \(roller failure\) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- [21\-020\-16](/bulletins/10181486.md), 2020-10-26, Service bulletin: POWER TRAIN; EQUIPMENT. Manual Transmission Shifter Noise This bulletin involves greasing or replacing the manual transmission rear shifter bushing. Customers may experience a clunk, squeak, or similar noise heard from center console area while shifting.

More: [the next page](/v1/vehicles/2010_dodge_challenger/bulletins?cursor=2020-10-26_10181486) (JSON)

JSON: [/v1/vehicles/2010_dodge_challenger/bulletins](/v1/vehicles/2010_dodge_challenger/bulletins)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%202010%20Dodge%20Challenger&page=https%3A%2F%2Fopen.wenmarpro.com%2Fmakes%2Fdodge%2Fchallenger%2F2010%2Fbulletins&vehicle=2010%20Dodge%20Challenger)