# Service bulletins for the 2011 Dodge Avenger

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

88 bulletins from NHTSA, as of 2026-10-19.

- [U67 Combo Rev11](/bulletins/11034343.md), 2026-07-02, Warranty extension: ENGINE. Emissions Recall U67 \- Catalytic Converter Efficiency \- Dealer Notification \(Revision 11\)
- [103954](/bulletins/11017445.md), 2025-05-01, Service bulletin: UNKNOWN OR OTHER. ACTUATOR \- A/C AND HEATER
- [104087](/bulletins/11017435.md), 2025-05-01, Service bulletin: UNKNOWN OR OTHER. ACTUATOR \- A/C AND HEATER
- [9100226](/bulletins/10248509.md), 2024-01-08, Service bulletin: ELECTRICAL SYSTEM. Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- [9003357](/bulletins/10247905.md), 2024-01-02, Service bulletin: BACK OVER PREVENTION. ADAPTER, Engine Oil Filter \(Pentastar V6\) For all 2014MY replace the Oil Filter Adapter \(OFA\). For any other MY \(with mileage above 30,000\) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1\) Remove OFA 2\) Replace only the oil inlet O\-ring and gaskets \(seals kit in SOL above\). 3\) Re\-install the OFA. For 2023MY and beyond use black O\-ring. For 2022MY and prior use red O\-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- [9100226](/bulletins/10244348.md), 2023-10-30, Service bulletin: ELECTRICAL SYSTEM:WIRING. Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- [9100196](/bulletins/10242717.md), 2023-09-25, Service bulletin: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
- [9003357a](/bulletins/10234379.md), 2023-04-17, Service bulletin: ENGINE AND ENGINE COOLING. ADAPTER, Engine Oil Filter \(Pentastar V6\) For all 2014MY replace the Oil Filter Adapter \(OFA\). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1\) Remove OFA 2\) Replace only the oil inlet O\-ring and gaskets \(seals kit in SOL above\). 3\) Re\-install the OFA. For 2023MY and beyond use black O\-ring. For 2022MY and prior use red O\-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- [9003357](/bulletins/10234378.md), 2023-04-17, Service bulletin: ENGINE AND ENGINE COOLING. ADAPTER, Engine Oil Filter \(Pentastar V6\) For all 2014MY replace the Oil Filter Adapter \(OFA\). For any other MY \(with mileage above 30,000\) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1\) Remove OFA 2\) Replace only the oil inlet O\-ring and gaskets \(seals kit in SOL above\). 3\) Re\-install the OFA. For 2023MY and beyond use black O\-ring. For 2022MY and prior use red O\-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- [U67 Combo Rev10](/bulletins/10231753.md), 2023-02-13, Service bulletin: POWER TRAIN. Emissions recal U67 Catalytic Converter Efficiency
- [U67](/bulletins/10230438.md), 2023-01-17, Service bulletin: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE; UNKNOWN OR OTHER. Some of the above\-involved vehicles may exceed NOx \(Oxides of Nitrogen\) emission level standards due to loss of catalytic converter efficiency
- [9003081](/bulletins/10229871.md), 2023-01-17, Service bulletin: ELECTRICAL SYSTEM. Dielectric Grease This product is no longer approved for use on ignition coil and spark plug boots. Current plug boot material\(silicone\) is not compatible with this grease and can cause deterioration over time.
- [3100122](/bulletins/10229572.md), 2023-01-09, Service bulletin: STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding \(STRSW\) and Gas Metal Arc Welding \(GMAW\) processes when welding steel body panels and structural components.
- [9004206](/bulletins/10228975.md), 2023-01-09, Service bulletin: PARKING BRAKE; STRUCTURE; POWER TRAIN. Remanufactured Transmission Assembly 1. All Promaster \(VF\) 3.6L/62TE equipped vehicles: a\) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners \(Part Number 06511385A$\) must be replaced as they are one\-time usage. b\) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c\) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. Only use the reman 62TE specified in StarParts for each model year \- Only use R8210327A$ for 2014 \- 2018 VF. \- Only use R8453637A$ for 2019 VF. \- Only use R8599680AA for 2020/1VF. Installing a R8453637A$ or R8599680A$ in a 2014\-18 VF will result in a 2014\-18 MY core being returned. Mopar can no longer convert 2014\-18 VF 62TE core to the 2019\-21 version. Continued mis\-usage will result in a core shortage. Mopar may deny warranty claims where the incorrect version is used in 2014\-18 VF. 3. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code\(s\) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 5. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.
- [V51](/bulletins/10228020.md), 2022-12-19, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); UNKNOWN OR OTHER. Customer Satisfaction Notification V51 Reprogram Powertrain Control Module
- [S2209000004](/bulletins/10227983.md), 2022-12-19, Service bulletin: EQUIPMENT; ENGINE AND ENGINE COOLING. If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
- [3100122](/bulletins/10225424.md), 2022-10-31, Service bulletin: STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding \(STRSW\) and Gas Metal Arc Welding \(GMAW\) processes when welding steel body panels and structural components.
- [3100122](/bulletins/10225287.md), 2022-10-31, Service bulletin: STRUCTURE:INTERIOR PANELS:DOOR; STRUCTURE; UNKNOWN OR OTHER. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding \(STRSW\) and Gas Metal Arc Welding \(GMAW\) processes when welding steel body panels and structural components.
- [2302720](/bulletins/10224075.md), 2022-10-17, Service bulletin: SEATS. Active Head Restraint \(AHR\) Inadvertent Deployment \- X84 Warranty Extension This bulletin involves inspecting the sled bracket striker pin and possibly replacing a front seat AHR that has inadvertently deployed. Customers may comment on the following:The AHR is deployed on one or both front seats and will not reset.
- [69912](/bulletins/10224057.md), 2022-10-17, Service bulletin: SEATS; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Warranty Bulletin D\-20\-16 \(X84\) Active Head Restraint \- Select 2010\-2018 Dodge Journey \(JC\) and 2010\-2014 Dodge Avenger/Chrysler 200 \(JS\)
- [9002887](/bulletins/10223599.md), 2022-10-17, Service bulletin: ENGINE AND ENGINE COOLING. Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.\~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.\~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- [9004268](/bulletins/10223512.md), 2022-10-17, Service bulletin: FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:THROTTLEBODY/MANIFOLD. THROTTLE BODY For clarification, only use 68414676A$ on 2010 \& earlier vehicles as supply is limited.
- [9004206](/bulletins/10223014.md), 2022-10-17, Service bulletin: STRUCTURE; PARKING BRAKE; POWER TRAIN. Remanufactured Transmission Assembly 1. All Promaster \(VF\) 3.6L/62TE equipped vehicles: a\) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners \(Part Number 06511385A$\) must be replaced as they are one\-time usage. b\) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c\) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. Only use the reman 62TE specified in StarParts for each model year \- Only use R8210327A$ for 2014 \- 2018 VF. \- Only use R8453637A$ for 2019 VF. \- Only use R8599680AA for 2020/1VF. Installing a R8453637A$ or R8599680A$ in a 2014\-18 VF will result in a 2014\-18 MY core being returned. Mopar can no longer convert 2014\-18 VF 62TE core to the 2019\-21 version. Continued mis\-usage will result in a core shortage. Mopar may deny warranty claims where the incorrect version is used in 2014\-18 VF. 3. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code\(s\) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 5. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.
- [S1121000006RevA](/bulletins/10221831.md), 2022-09-26, Service bulletin: POWER TRAIN:TRANSMISSION CASE/HOUSING; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); ELECTRICAL SYSTEM. \(Revision A\) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
- [9004206](/bulletins/10221375.md), 2022-09-26, Service bulletin: POWER TRAIN. Remanufactured Transmission Assembly 1. All Promaster \(VF\) 3.6L/62TE equipped vehicles: a\) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners \(Part Number 06511385A$\) must be replaced as they are one\-time usage. b\) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c\) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. Only use the reman 62TE specified in StarParts for each model year \- Only use R8210327A$ for 2014 \- Feb 28, 2019 VF. \- Only use R8453637A$ or R8599680A$ for March 1, 2019 and later VF as they have the revised park system. \- R8453637A$ and R8599680A$ are physically and functionally equivalent. Installing a R8453637A$ or R8599680A$ in a 2014 \- Feb 28, 2019 VF will result in a core with the original park system being returned. Mopar can no longer convert 62TE core with the original park system to the March 1, 2019 and later version. Continued mis\-usage will exacerbate the existing core shortage. Mopar may deny warranty claims where the incorrect version is used in 2014\-18 VF. 3. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code\(s\) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 5. There may be incorrect fluid measurement on the dipstick tool when

More: [the next page](/v1/vehicles/2011_dodge_avenger/bulletins?cursor=2022-09-26_10221375) (JSON)

JSON: [/v1/vehicles/2011_dodge_avenger/bulletins](/v1/vehicles/2011_dodge_avenger/bulletins)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%202011%20Dodge%20Avenger&page=https%3A%2F%2Fopen.wenmarpro.com%2Fmakes%2Fdodge%2Favenger%2F2011%2Fbulletins&vehicle=2011%20Dodge%20Avenger)