WenmarOpen by Wenmar Pro

Service bulletins for the 2023 Chrysler Voyager

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

306 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
S258A0000172025-08-06. Service bulletin. ELECTRICAL SYSTEM. Door speaker Inoperative or No Sound
S2509000001 REV.B2025-07-31. Service bulletin. ENGINE. Engine Rattle Noise
S2422000001 REV.D2025-07-31. Service bulletin. ELECTRICAL SYSTEM. Tire Pressure Monitor (TPM) Service Information. TPM Lamp On.
23-006-25 REV. B2025-07-31. Service bulletin. STRUCTURE:BODY. Windshield Wiper Blade Maintenance Customers may experience one or more of the following: ● Wiper blades that chatter/streak/jump/skip/smear or make noise while traveling across the windshield.
91006222025-07-09. Service bulletin. ENGINE. When replacing a camshaft and parts kit (P/N 68661146xx and/or 68661147xx), it is NOT necessary to order the roller-finger followers (rocker arms) separately, as these are included in the camshaft parts kit.
S2208000138 REV.B2025-07-09. Service bulletin. ELECTRICAL SYSTEM. Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
91006162025-07-08. Service bulletin. ELECTRICAL SYSTEM. Telematics Box Module Verify Z part number availability. Order a Z part number for all Exchange Orders: Warranty, Mopar, customer pay and service contract. Order regular part number for New unsold units only.
S2408000072 REV.A2025-07-02. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Power Sliding Door Inoperative or Intermittently Will Not Open or Close
91006142025-06-26. Service bulletin. ENGINE. ADJUSTER Valve Lash Customer's complaint may include a ticking noise coming from the engine. Technician's observations can refer to spongy or stuck hydraulic lash adjusters. Exhaust lash adjusters found with a "spongy" condition (compressible plunger) leading to the assumption of being defective/malfunctioning. EXHAUST lash adjusters are designed to be COMPRESSIBLE by hand. Intake lash adjusters found with a stiff or stuck condition (non-compressible plunger) leading to the assumption of being defective/malfunctioning. INTAKE lash adjusters are designed to be NON COMPRESSIBLE by hand. Do Not Replace EXHAUST lash adjusters when the following condition is present: should be compressible, but they will exert a reactionary spring force during compression and return to full expansion without a compression force. Do Not Replace INTAKE lash adjusters when the following condition is present: should feel very firm and difficult to compress. Once the correct functioning of the intake and exhaust lash adjusters is validated with the procedure above, refer to the Service Manual "HYDRAULIC LIFTER(S) NOISE DIAGNOSIS" procedure. After the corresponding service procedures from the Service Manual involving the Lash Adjusters have been conducted, refer to the detailed instructions in the Service Manual to diagnose and/or service any other component.
08-194-252025-06-26. Service bulletin. ELECTRICAL SYSTEM. Flash: Heating Venting Air Conditioning (HVAC) Module Update 2022 (RU) Chrysler Pacifica / Voyager This bulletin applies to vehicles equipped with: ● 3 Zone Auto Control-Front/Rear A/C (Sales Code HAH). ● Air Conditioning w/3 Zone Temp Cntrl (Sales Code HAK). ● All Vehicles W/Air Conditioning (Sales Code HA0). ● Rear Air Conditioning w/Heater (Sales Code HBB). This bulletin involves updating the HVAC with the latest available software.
S25230000572025-06-26. Service bulletin. SEATS. 1st Row Armrest Not Holding Position, Being Broken, Being Too Low, Or Touching The Console.
91005992025-05-29. Service bulletin. ELECTRICAL SYSTEM. Underhood start/stop safety The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC): - P152E Engine -Hood Switch 2 Circuit High. - DTC P152F Customers may also experience: - Start/Stop system warning light. - Start/Stop inoperable. - Remote start inoperable. Diagnosis: - Using a Scan Tool (wiTECH) with the appropriate Diagnostic Procedures available in DealerCONNECT/Service Library, verify all related systems are functioning as designed. If DTCs or symptom conditions, other than the one listed are present, record the issues on the repair order and repair as necessary before proceeding further with this bulletin. - If any vehicle exhibits any of the symptoms listed above in the customer symptom section, perform the Repair Procedure. - Special Tools/Equipment: wiTECH or equivalent. Repair Procedure: 1. Open the hood and locate the hood switch 2. Push in on the two locking tabs and pull them out. 3. Disconnect the wire connector from the switch. 4. Connect the wires to the same hood switch. 5. Push the switch back into the hold until both lock tab are engaged. 6. Clear all DTCs that may have been set in any module during this repair procedure. 7. In case the P152F/P152E DTCs persist, repeat the procedure with a new/spare/known good switch and repeat steps 5 and 6. 8. Replace switch installed during previous step for the original switch of the vehicle. If DTCs P152F/P152E are not present, leave the original switch installed and do not document the change of the switch in the repair process/narrative.
S25230000502025-05-28. Service bulletin. POWER TRAIN; ENGINE; UNKNOWN OR OTHER. Vibration From Engine Or Powertrain. Powertrain Mounting Neutralization Procedure. Discussion: Service information is in the process of being updated to include powertrain mount installation best practices. The new procedure will neutralize the mounts to lessen or remove unwanted mount tension that can lead to vibration complaints.
09-011-252025-05-20. Service bulletin. ENGINE. "Misfire Diagnostic Trouble Codes (DTCs), Rough Idle, Valvetrain Noise Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0301 - Cylinder 1 Misfire. ● P0302 - Cylinder 2 Misfire. ● P0303 - Cylinder 3 Misfire. ● P0304 - Cylinder 4 Misfire. ● P0305 - Cylinder 5 Misfire. ● P0306 - Cylinder 6 Misfire. Customers may comment on one or more of the following: ● Rough idle. ● Valvetrain noise. "
9100498 Rev 32025-05-19. Service bulletin. ENGINE. 3.6L PSU Long Block Misfire DTC codes and/or rough idle and/or valvetrain noise. Refer to SOL # S2509000004. It is also important to confirm that the vehicle being repaired has the latest calibration/software update for oil pump operation mode (high pressure mode) during engine start up. RU, VF, WL & WD vehicles already include the latest oil pump mode in all 25MY and beyond. 24MY service releases are also available. JL & JT were updated as a running change in 24MY and beyond (08/15/24 & 08/19/24 respectively). 24MY service releases available. DT was updated starting 25MY and beyond. If the vehicle to be repaired is a 24MY vehicle with a service release available, please follow the released service procedures to update to the corresponding calibration/software.
S25080000392025-05-19. Service bulletin. ELECTRICAL SYSTEM. Universal Garage Door Opener (UGDO) Inoperative, LED Indicator Lamps Not Illuminating
S2323000002 REV.A2025-05-19. Service bulletin. ELECTRICAL SYSTEM. "Washer Light On And Will Not Turn Off After Adding Washer Solvent."
S2423000026 REV.A2025-05-19. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. Power Sliding Door Will Not Power Open And/Or Close Automatically.
S258A000016REVA2025-05-16. Service bulletin. ELECTRICAL SYSTEM. DVD/Blu-ray Not Syncing Between The Two Rear Screens.
S258A0000162025-05-14. Service bulletin. ELECTRICAL SYSTEM. DVD/Blu-ray Not Syncing Between The Two Rear Screens.
S2408000114 REV.A2025-05-14. Service bulletin. FORWARD COLLISION AVOIDANCE: WARNINGS; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. " Instrument Panel Cluster (IPC) Displays Warning Lamps or Messages for Loss of Advanced Driver Assist System (ADAS)"
91005452025-05-07. Service bulletin. ELECTRICAL SYSTEM. "CLUSTER Instrument Panel Multiple cluster issues if misdiagnosed can lead to unnecessary IPC replacement. Tech Tip: Reset the IPC module first before any steps are taken to replace the module are undertaken. Connect Witech to the vehicle. Reset all DTCs and check for active DTCs warnings set against IPC. If battery low indicated against IPC, reset the module via WiTech tool. NOTE: After Battery Drainage, the IPC may not function correctly. Please follow the following steps before considering an IPC replacement: 1) Charge the Battery Ensure the battery is fully charged. 2) Soft Reset Perform a soft reset on the IPC. 3) Power-Up Issue 4) If the IPC does not power up, proceed with the following steps: a. Disconnect the battery. b. Reconnect the battery. 5) If condition still exists, consider IPC replacement."
91005692025-05-06. Service bulletin. ELECTRICAL SYSTEM. "Video Routing Module Verify Z part number availability. Order a Z part number for all Exchange Orders: Warranty, Mopar, customer pay and service contract. Order regular part number for New, Unsold units only. Please review the latest version of SOL S2208000030 regarding DVD/blue ray issues. After updating software perform resets on both display or concern may still appear. After Battery Drainage VRM do not work. Please follow the following steps. 1. Check VRM proxi, if the VRM is not aligned, perform proxi alignment, reset module. 2. If proxi is correct, reset module 3. Check for DTCs, and check wiring and components related to those DTCs and clear them."
S258A0000132025-04-17. Service bulletin. ELECTRICAL SYSTEM. AM Radio Static, With No Active or Stored Radio Antenna Diagnostic Trouble Codes (DTC).
9100347 Rev 12025-04-16. Other. SEATS. "3rd row headrest If you have customer with issue involving the 3rd row headrest not staying up. It has been determined that the issue is with the trim carpet the headrest strap goes through, not the headrest mechanism. Please do not replace the headrest/headrest mechanism and instead refer to SOL S2423000025 for the proper rework procedure that should be done"

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.