WenmarOpen by Wenmar Pro

Service bulletins for the 2021 Chrysler Voyager

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

408 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
1097242026-01-28. Service bulletin. ENGINE. Water Pump & Chain Case Cover
S2408000114 REV.B2026-01-21. Service bulletin. ELECTRICAL SYSTEM. Instrument Panel Cluster (IPC) Displays Warning Lamps or Messages for Loss of Advanced Driver Assist System (ADAS)
91007352025-12-17. Service bulletin. ELECTRICAL SYSTEM. Verify "Z" part number availability. Order a "Z" part number for all Exchange Orders: Warranty, Mopar, Customer pay and Service contract. Order"68" part number for New unsold units only
S258A0000212025-12-11. Service bulletin. ELECTRICAL SYSTEM. Diagnostic Trouble Code (DTC) B15A1-00 Media Port Connection 1 Connection Found Set.
S25080001022025-11-13. Service bulletin. ELECTRICAL SYSTEM. Intermittent Uconnect Box Requires Service Message. TBM Setting Stored Or Pending DTCs B22A9, B1560, B1561, B1562
S25090000092025-11-05. Service bulletin. ENGINE. Engine Oil Leak
1056462025-10-15. Service bulletin. STEERING. MODULE - STEERING CONTROL & COLUMN
21-040-252025-10-08. Service bulletin. POWER TRAIN. 948TE Transmission Reaction Shaft Service Bushing Kit Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● P1DB7-00 - Torque Converter Clutch Performance.
S2519000008 REV.A2025-10-02. Service bulletin. UNKNOWN OR OTHER. Noise From Front End While Steering Or Turning The Steering Wheel.
91006702025-10-02. Service bulletin. ENGINE. Data collection required for all 2020-2026MY vehicles with 3.6L PSU engines during any of their first 3 engine oil changes. This data collection is applicable to all vehicle with engines with sales codes: ERG, ERC, EH3 and ERF. To assist with monitoring and quality improvement of the 3.6L engine, every time a vehicle comes for any of the first 3 oil changes, please use wiTECH to record the total engine idle time and the total engine runtime. 1. Prior to perform the oil change connect wiTECH diagnostic tool. 2. Navigate to the topology screen on the action item section. 3. Once the topology screen loads, disconnect wiTECH and continue with oil change.
1072112025-10-02. Service bulletin. ENGINE. HOSE AND TUBE - EGR COOLANT
S2218000003 REV.B2025-09-24. Service bulletin. ELECTRICAL SYSTEM. Customer complaint may include a Mil On/Check Engine Lamp On and Electronic Throttle Control (ETC) Lamp On. There may also be associated driveability issues. Upon further investigation, the following fault codes may be found in the PCM:
23-008-25 REV. A2025-09-24. Service bulletin. STRUCTURE:BODY. Exterior Front Lamps Condensation Clearing Procedure *Some customers may report that on occasion vehicle exterior front lamps (headlamps, fog lamps, grille lamps, logo lamps or signature lamps) assemblies are fogged with a light layer of condensation on the inside of the lenses*
02-002-25 REV. A2025-09-17. Service bulletin. SUSPENSION. Shock And Strut Diagnosis And Replacement Guidelines Leaking, noisy, or weak shocks or struts.
S25190000082025-09-04. Service bulletin. SUSPENSION. Noise From Front End While Steering Or Turning The Steering Wheel.
31-001-25 REV. A2025-08-21. Service bulletin. STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-252025-08-21. Service bulletin. STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
S258A0000172025-08-06. Service bulletin. ELECTRICAL SYSTEM. Door speaker Inoperative or No Sound
S2509000001 REV.B2025-07-31. Service bulletin. ENGINE. Engine Rattle Noise
S2422000001 REV.D2025-07-31. Service bulletin. ELECTRICAL SYSTEM. Tire Pressure Monitor (TPM) Service Information. TPM Lamp On.
91006222025-07-09. Service bulletin. ENGINE. When replacing a camshaft and parts kit (P/N 68661146xx and/or 68661147xx), it is NOT necessary to order the roller-finger followers (rocker arms) separately, as these are included in the camshaft parts kit.
S2208000138 REV.B2025-07-09. Service bulletin. ELECTRICAL SYSTEM. Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
91006162025-07-08. Service bulletin. ELECTRICAL SYSTEM. Telematics Box Module Verify Z part number availability. Order a Z part number for all Exchange Orders: Warranty, Mopar, customer pay and service contract. Order regular part number for New unsold units only.
S2408000072 REV.A2025-07-02. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Power Sliding Door Inoperative or Intermittently Will Not Open or Close
91006142025-06-26. Service bulletin. ENGINE. ADJUSTER Valve Lash Customer's complaint may include a ticking noise coming from the engine. Technician's observations can refer to spongy or stuck hydraulic lash adjusters. Exhaust lash adjusters found with a "spongy" condition (compressible plunger) leading to the assumption of being defective/malfunctioning. EXHAUST lash adjusters are designed to be COMPRESSIBLE by hand. Intake lash adjusters found with a stiff or stuck condition (non-compressible plunger) leading to the assumption of being defective/malfunctioning. INTAKE lash adjusters are designed to be NON COMPRESSIBLE by hand. Do Not Replace EXHAUST lash adjusters when the following condition is present: should be compressible, but they will exert a reactionary spring force during compression and return to full expansion without a compression force. Do Not Replace INTAKE lash adjusters when the following condition is present: should feel very firm and difficult to compress. Once the correct functioning of the intake and exhaust lash adjusters is validated with the procedure above, refer to the Service Manual "HYDRAULIC LIFTER(S) NOISE DIAGNOSIS" procedure. After the corresponding service procedures from the Service Manual involving the Lash Adjusters have been conducted, refer to the detailed instructions in the Service Manual to diagnose and/or service any other component.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.