Service bulletins for the 2017 Chevrolet Trax
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
1030 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| 080730026D | 2018-05-07. Service bulletin. ELECTRONIC STABILITY CONTROL (ESC). This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped. |
|---|---|
| 050604022N | 2018-05-07. Service bulletin. FUEL SYSTEM, GASOLINE. This informational bulletin provides information on the top tier fuels that are recommended in GM vehicles. |
| 040604051D | 2018-05-07. Service bulletin. FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:INJECTORS. This informational bulletin provides information for maintenance cleaning of the fuel injectors. |
| 040089015N | 2018-05-07. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This warranty administration bulletin provide policy information on required operating procedures. |
| 030603004T | 2018-05-07. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Battery Testing and Warranty Replacement Requirements (North America ONLY) |
| 030603004S | 2018-05-07. Service bulletin. ELECTRICAL SYSTEM. This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements. |
| 070849020M | 2018-04-23. Service bulletin. EQUIPMENT. This informational bulletin provides information for the IPC odometer programming method quick reference guide. |
| 17NA331 | 2018-04-23. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This informational bulletin provides information to the customer about the rear camera guidelines not being present at times due to the VBM taking over the rear camera option. |
| 150603002H | 2018-04-23. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM:12V/24V/48V BATTERY. This informational bulletin provides information on approved warranty part numbers for original equipment batteries |
| 150089005A | 2018-04-23. Service bulletin. EQUIPMENT; ENGINE. This warranty administration bulletin provides dealership personnel with policy and procedure requirements for essential tools that include consumable parts (U.S. Only). |
| 150089004B | 2018-04-23. Service bulletin. EQUIPMENT. This informational bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered seepage. |
| 140089004D | 2018-04-23. Service bulletin. ELECTRICAL SYSTEM:IGNITION; ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:CONTROL MODULE. The information in this bulletin details the proper configurations for the ignition key, fob, key tags, key rings, key ring sizes and applying a QR code sticker or barcode sticker to a key fob. |
| 12-08-132-001D | 2018-04-23. Service bulletin. ELECTRICAL SYSTEM. This informational bulletin provides warranty information on accessory power outlet and trailer lighting fuse replacement. |
| 16-NA-119 | 2018-04-23. Service bulletin. EQUIPMENT. This warranty administration bulletin provides information on GM?s policy on performing GM covered vehicle services and maintenance on vehicles originating/sold in Canada. |
| GCUS-3-826 | 2018-04-02. Service bulletin. EQUIPMENT:MECHANICAL. 16179-01-Service Update (Service Procedure revised). Certain vehicles were built with 2 missing welds at the front, right side, lower area of the wheelhouse. There may be a potential for squeaks and rattles to develop. Inspect for missing spot welds and install rivets if necessary. |
| GCUS-3-810 | 2018-04-02. Service bulletin. WHEELS. 16179 - SUB - Certain vehicles were built with 2 missing welds at the front, right side, lower area of the wheelhouse. There may be a potential for squeaks and rattles to develop. Inspect for missing spot welds and install rivets if necessary. |
| PIT5411J | 2018-03-12. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This Preliminary Information communication advises the technician that the Human Machine Interface, Radio or Tuner, radio controls, Integrated Center Stack, display, and Media Disc Players are placed on restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance. |
| PIP4670E | 2018-03-12. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about a no start or another concern after swapping an Engine Control Module or other modules from one vehicle to another. The Global Architecture electrical system associated with these vehicles does not allow controller swaps between vehicles. |
| PIP5226B | 2018-02-21. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings. |
| PIT3271H | 2018-02-21. Service bulletin. WHEELS. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection. |
| PIP5495D | 2018-02-21. Service bulletin. EXTERIOR LIGHTING. This Preliminary Information communication provides information to the technician about vehicles that may have a Malfunction Indicator Lamp on. The technician may find Diagnostic Trouble Codes P0299 or P0234 set. The technician is provided with a list of causes of misdiagnosis leading to returned Turbochargers with no trouble found.The purpose of this information is to reduce the number of no trouble found (NTF) turbochargers being returned to the WPC by informing the Service Department personnel of what inspections and/or diagnosis toperform, prior to replacing and returning a turbocharger to the WPC. |
| PIP5540A | 2018-02-21. Service bulletin. ENGINE. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance. |
| PIP5540 | 2018-02-21. Service bulletin. EQUIPMENT. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. |
| PIC5650D | 2018-01-16. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies. |
| PIT5354B | 2018-01-16. Service bulletin. EQUIPMENT:ELECTRICAL. This Preliminary Information communication advises the technician how to determine if the vehicle is equipped with wireless fidelity. Technician should check the Regular Production Option Code list for (VV4). |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.