Service bulletins for the 2019 Chevrolet Traverse
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
819 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Engine are shown. Show all
| PIE0528 | 2019-08-19. Service bulletin. ENGINE AND ENGINE COOLING. Some customers may note a Check Engine Light related to the evaporative emission canister performance. Technicians may find the following DTCs set: • P0442 • P0455 • P0446 • P0449 • P0498 This engineering informational bulletin is requesting information from the field on warranty parts for complete canister assemblies that apply to the DTC codes specified and has leak conditions. Engineering is determining a root cause and developing a Field Fix. |
|---|---|
| PIP5661 | 2019-08-12. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates diagnostics and repairs in addition to what is already in Service Information. The concern this document is designed for is specific to some 2019 vehicles with 2.0 LTG engine exhibiting a misfire and MIL due to P0300. |
| PIP5257C | 2019-08-12. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have oil mixed in with the engine coolant. Technician will need to inspect the oil cooler if equipped for possible leaking into the cooling system through the radiator. If no issue found replace the engine as well as all rubber coolant hoses. |
| 090604026Q | 2019-07-29. Service bulletin. ENGINE; EQUIPMENT. This informational bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2. |
| 19NA104 | 2019-07-29. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY. This informational bulletin provides information for dealers/technicians and customers on steam/vapor coming from the front grille or radiator area. |
| PIP5528C | 2019-07-08. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates the identification process for High Feature V6 camshafts in re-manufactured engines. |
| PIT5609A | 2019-07-08. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates SES lamp with DTC U1345. Inspect connection at the upper and lower Aero Shutters for water. Clean and repair as needed. |
| 18NA246 | 2019-07-01. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ENGINE; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV). This technical bulletin provides a procedure to change the oil if excessive fuel has been found in the oil and the cause of the DTC set. Also replacing the PCV valve in camshaft cover and updating the ECM with latest software. |
| 16NA383 | 2019-07-01. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. This informational bulletin advises of a new fuel injection kit used for decarbonizing the intake valves, and explains how toptier fuels should be used to reduce carbon build up. |
| N192214590 01 | 2019-06-24. Service bulletin. ENGINE AND ENGINE COOLING. Service Update - Revised to add Traverse. Certain vehicles may not have the snow/ice mode calibration enabled. This missing calibration results in the selection of snow/ice mode (knob selector) not having a change in the accelerator pedal response. Reprogram the engine control module (ECM). |
| PIP5549A | 2019-06-10. Service bulletin. ENGINE. This Preliminary information communicates a diagnostic trail to a likely conclusion for lean codes on these vehicles. |
| PIP5569A | 2019-06-03. Service bulletin. ENGINE; FUEL SYSTEM, GASOLINE. This Preliminary information communicates to the dealer an issue where the vehicle's engine may crank over unprompted and not start afterward. This is the result of hooking up the Active Fuel Injector Tool incorrectly on vehicles equipped with a direct fuel injection system. This Preliminary information instructs the dealer of a repair kit they received that will prevent this issue when installed correctly. |
| PIP5528B | 2019-06-03. Service bulletin. ENGINE. This Preliminary information communicates the identification process for High Feature V6 camshafts in re-manufactured engines. |
| PIP4670F | 2019-06-03. Service bulletin. ENGINE; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about a no start or another concern after swapping an Engine Control Module or other modules from one vehicle to another. The Global Architecture electrical system associated with these vehicles does not allow controller swaps between vehicles. |
| PIE0476A | 2019-04-22. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ENGINE AND ENGINE COOLING. This engineering information PI ends the need for information from the field for areas to look for oil leak. |
| 19NA044 | 2019-04-22. Service bulletin. ENGINE. This informational bulletin provides information on a normal engine operating condition for faster emission warm up time. |
| 18NA246 | 2019-04-22. Service bulletin. ENGINE. This technical bulletin provides a procedure to change the oil if excessive fuel has been found in the oil and the cause of the DTC set. Also replacing the PCV valve in camshaft cover and updating the ECM with latest software. |
| 18NA246 | 2019-04-22. Service bulletin. ENGINE; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV). This technical bulletin provides a procedure to change the oil if excessive fuel has been found in the oil and the cause of the DTC set. Also replacing the PCV valve in camshaft cover and updating the ECM with latest software. |
| 18NA246 | 2019-04-15. Service bulletin. ELECTRICAL SYSTEM; FUEL/PROPULSION SYSTEM; ENGINE. This technical bulletin provides a procedure to change the oil if excessive fuel has been found in the oil and the cause of the DTC set. Also replacing the PCV valve in camshaft cover and updating the ECM with latest software. |
| 18NA246 | 2019-04-08. Service bulletin. FUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV); ENGINE. This technical bulletin provides a procedure to change the oil if excessive fuel has been found in the oil and the cause of the DTC set. Also replacing the PCV valve in camshaft cover and updating the ECM with latest software. |
| 18NA246 | 2019-04-01. Service bulletin. ENGINE AND ENGINE COOLING. This technical bulletin provides a procedure to change the oil if excessive fuel has been found in the oil and the cause of the DTC set. Also replacing the PCV valve in camshaft cover and updating the ECM with latest software. |
| 120601003C | 2019-03-25. Service bulletin. ENGINE. This Bulletin Provides Information for Repairing Engine Front Cover Oil Leak, Sealing Surface Preparation and Applying RTV Sealant. |
| 18NA379 | 2019-03-25. Service bulletin. POWER TRAIN; ENGINE. This technical bulletin provides a procedure to program the TCM to correct the customers concern of a MIL Illuminated, Vehicle wont go above 25 mph and/or 1-2 Shifts feel like a momentary tie up. |
| PIC5650F | 2019-03-18. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies. |
| PIP5623 | 2019-03-11. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates that a rotational clicking noise heard after engine shut down is a design characteristic and no repairs should be attempted. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.