Service bulletins for the 2015 Chevrolet Suburban
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
2542 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| 03-06-03-003D | 2018-06-04. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. This warranty administration bulletin provides policy information on ACDelco® replacement battery warranty procedures. |
|---|---|
| 11-00-89-004A | 2018-06-04. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This warranty administration bulletin adds 2012 - 2015 model years to information communicating a change in the product field action customer reimbursement procedure (U.S. Dealers Only). |
| 09-06-04-026J | 2018-06-04. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin supplies infomation for identifying non-GM (Aftermarket) engine calibrations for gasoline engines using Tech 2® or GDS 2 (U.S. and Canada). |
| PI0360E | 2018-06-04. Service bulletin. EQUIPMENT. This preliminary informational bulletin provides information that accessory remote start does not work with OnStar RemoteLink? phone application. |
| PI0345E | 2018-06-04. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This preliminary informational bulletin provides inspection and repair information that may be helpful to correct customer concerns of XM/Cellular Mobile Phone/OnStar® antenna looseness or damage, XM/Cellular/OnStar® reception performance degraded, rattle/flutter/squeak noise, wind noise/whistle at highway speeds, and/or a water leak on headliner at sunvisor. |
| PI1375A | 2018-06-04. Service bulletin. EQUIPMENT:ELECTRICAL. This preliminary informational bulletin provides repair information to correct customer concerns about blank display, NAV screen audio content is unavailable via speech recognition, display screen is stuck on incoming call view after phone call finished, rear view camera display blank, USB issues, Bluetooth/Favorite Bar/Voice, iPod unable to detect via USB, recognition concerns, XM speech recognition inoperative, traffic messages, clock display. |
| PIT5285A | 2018-06-04. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This Preliminary Information communication provides information to the technician about vehicles that may have a radio display does not always return to the previous call/source screen when a Bluetooth call has ended and/or that the call timer may continue to flash and increment. The call/source screen staying displayed is a normal operating characteristic and cannot be changed. Technician should updated the Human Machine Interface to prevent the call timer from flashing and incrementing after the call has ended. |
| PIP5259D | 2018-06-04. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about vehicles with a Service Engine Soon Malfunction Indicator Lamp on and a misfire or a tick noise. Technician may find a Diagnostic Trouble Code P0300 set. If Service Information diagnosis does not isolate the cause of this concern inspect the valve operation. If the valve or valves are not moving the replace the Active Fuel Management lifters and guide on the bank with the concern and the Valve Lifter Oil Assembly. |
| PIT5393 | 2018-06-04. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that may have battery draw complaint. Technician should not replace the Instrument Panel Cluster for this concern. Technician should test the battery on the vehicle before performing any diagnostics. Low voltage can be caused by a number of reasons discharged battery, battery cable connections, infrequent usage, extended storage, short trip driving, extended key on accessory usage with the engine off, charging issues, and aftermarket electrical accessories. |
| PIT5378A | 2018-06-04. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This Preliminary Information communication provides information to the technician about vehicles that may have a radio display that flickers at first start up. Engineering is currently evaluating this concern. |
| PIP5223C | 2018-06-04. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication advises the technician that the E92 Engine Control Module part number 12662034 part restriction through General Motors Product Quality Center has ended. Dealer can order the parts through the regular Customer Care and Aftersales parts process. |
| PIC5161E | 2018-06-04. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This Preliminary Information communication provides information to the technician about vehicles that the radio can be turned on after turning the ignition off and opening the driver?s door. The radio can then be turned back on after the vehicle's Retained Accessory Power has been canceled by simply pressing the power button on the radio. This is a normal characteristic of the key off operation. |
| PIP5250E | 2018-06-04. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This Preliminary Information communication provides information to the technician about vehicles that may have a Service 4WD message on the Driver Information Center when operated below 10 degrees Fahrenheit (-12 Celsius). Technician may find C0398 or C0326 stored in the Transfer Case Control Module. For vehicles with Regular Production Option Code NQH and NQ6 and only setting Diagnostic Trouble Codes C0398 or C0398 and C0326 the replacement of the actuator motor will correct the concern. Dealer will need to contact General Motors Product Quality Center for further assistance. For vehicles with Regular Production Option Code NQH and NQ6 with other transfer case Diagnostic Trouble Codes. If the vehicle had a Diagnostic Trouble Code C0398 in the transfer case control module stored with any other codes such as C0392, C0396, C0306 or other codes related to rotational position sensor or actuator position sensor it is likely that is causing a C0398 to set and replacement of the actuator will likely not repair the vehicle. For vehicles with Regular Production Option Code NP0 and only have a Diagnostic Trouble Code C0398 stored in the transfer case control module, the technician should insure the transfer case control module calibrations are up-to-date in Tis2Web. |
| PIT5391 | 2018-06-04. Service bulletin. ELECTRICAL SYSTEM:WIRING; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that have a no crank or a start and then immediate stall, Service Engine Soon Malfunction Indicator lamp may not be on when the ignition is in the run position. Technician may find Diagnostic Trouble Codes P0513 and or P262B may also be set. Technician will pulled the driver sill plate and inspect the wiring for damaged or corroded circuits. Technician will repair any damaged or corroded circuits. |
| PIT5390 | 2018-06-04. Service bulletin. EQUIPMENT:ELECTRICAL. This Preliminary Information communication provides information to the technician about vehicles that have the alarm sounding when learning new key fobs after the original key fobs were lost. Technician will open the driver?s door and allow the Content Theft Deterrent alarm to activate, which will pulse the horns and exterior lamps for approximately 30 seconds and the alarm will shut off at this time. As long as the driver?s door remains open the alarm will not turn back on and the new transmitters can be programmed. |
| PIT5389 | 2018-06-04. Service bulletin. EQUIPMENT:ELECTRICAL. This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system. |
| PIT5365B | 2018-06-04. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This Preliminary Information communication provides information to the technician on how the radio display gets the air ambient temperature. On 1500 series trucks and all sport utility vehicle with regular production option code IO3 radio the ambient air temperature sensor is hard wired to the engine control module and then the signal goes on high speed local area network to the body control module from there on low speed local area network to the radio. On 1500 series trucks and all sport utility vehicle with regular production option code IO4, IO5, or IO6 the ambient air temperature sensor is hard wired to the engine control module and then the signal goes on high speed local area network to the body control module from there on low speed local area network to the radio then Most 50 Bus to the Human Machine Interface. On 2500/3500 series trucks production option code IO3 radio the ambient air temperature sensor is hard wired to the instrument panel cluster and then the signal goes on low speed local area network to the radio. On 2500/3500 series trucks production option code IO4, IO5, or IO6 radio the ambient air temperature sensor is hard wired to the instrument panel cluster and then the signal goes on low speed local area network to the radio then Most 50 Bus to the Human Machine Interface. |
| PIT5236C | 2018-06-04. Service bulletin. EQUIPMENT. This Preliminary Information communication provides information to the technician about vehicle that may OnStar inoperative and Navigation/GPS/Compass issues. Technician may find Diagnostic Trouble Codes B101D sym 3C and or F0. Technician will gather data using a scan tool and contact General Motors Technical Assistance Center for further assistance. After approval technician will replace the OnStar module. |
| PIT5388 | 2018-06-04. Service bulletin. AIR BAGS. This Preliminary Information communication provides information to the technician about vehicles that may not level the truck when there is load in the rear of their vehicle or a trailer is attached to the vehicle. Technician will need to inspect the air bags on the shocks for kinked or trapped bags. If any shocks are found with air bags kinked or trapped replace that shock. Then the technician should update the Engine Control Module with the latest calibrations. |
| PIP5250D | 2018-06-04. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about vehicles that may have a Service 4WD message on the Driver Information Center when operated below 10 degrees Fahrenheit (-12 Celsius). Technician may find C0398 or C0326 stored in the Transfer Case Control Module. For vehicles with Regular Production Option Code NQH and NQ6 and only setting Diagnostic Trouble Codes C0398 or C0398 and C0326 the replacement of the actuator motor will correct the concern. Dealer will need to contact General Motors Product Quality Center for further assistance. For vehicles with Regular Production Option Code NQH and NQ6 with other transfer case Diagnostic Trouble Codes. If the vehicle had a Diagnostic Trouble Code C0398 in the transfer case control module stored with any other codes such as C0392, C0396, C0306 or other codes related to rotational position sensor or actuator position sensor it is likely that is causing a C0398 to set and replacement of the actuator will likely not repair the vehicle. For vehicles with Regular Production Option Code NP0 and only have a Diagnostic Trouble Code C0398 stored in the transfer case control module, the technician should insure the transfer case control module calibrations are up-to-date in Tis2Web. |
| PIT5384 | 2018-06-04. Service bulletin. EQUIPMENT; EQUIPMENT:ELECTRICAL. This Preliminary Information communication provides information to the technician about vehicles that may have the OnStar wireless fidelity inoperative. Technician will need to contact General Motors Technical Assistance Center with a scan tool connect to the vehicle for further assistance. |
| PIT5383 | 2018-06-04. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER; EQUIPMENT. This Preliminary Information communication provides information to the technician about vehicles with various Heater-Vent-Air Conditioning concerns. Technician will need to reprogram HVAC Control Module with the updated calibration available in TIS2WEB starting on 1/17/2015. |
| PIT5380 | 2018-06-04. Service bulletin. SEATS. This Preliminary Information communication provides information to the technician about vehicle that may have a front driver's or passenger's seat back may lean or be turned outward. Technician will need to remove the seat bottom trim cover and reinstall it completely and squarely to the cushion to correct the concern. |
| PIT5378 | 2018-06-04. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This Preliminary Information communication provides information to the technician about vehicle that may have a radio display flickers momentarily when first starting the vehicle. Dealer should communicate to the customer that we apologize for this inconvenience and that General Motors is currently evaluating this concern. |
| PIT5379 | 2018-06-04. Service bulletin. EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES; EQUIPMENT:ELECTRICAL. This Preliminary Information communication provides information to the technician about vehicles that may have a content theft alarm sounding for no apparent reason. Technician may use all published Service Information diagnostics and has not found the cause of the unwanted content theft alarm sounding. Technician should use Global Diagnostic System 2 to review the Body Control Module parameters for "Content Theft Deterrent Trigger History". This is a list of triggers that can cause a content theft alarm sounding. Driver door Passenger door, Left rear door, Right rear door, Rear closure, Tonneau Cover, Hood, Ignition Voltage, Intrusion, Inclination, Telematics enhanced service alarm, Battery reconnect detected, Unauthorized Pulse Width Modulated change, Security Indicates Tamper, and Glass Breakage. If the trigger is an Intrusion inspect for items hanging from the rear view mirror, solar powered dancing characters. When the trigger is a Glass breakage inspect the two rear quarter-panel windows and also in the liftgate glass. The quarter panel windows are attached to the body harness with a connector that looks similar to a 9 volt battery connector inspect them to be fully seated in on the glass. When the trigger is Ignition Voltage/Battery reconnect detected during a cold ambient temperature remote vehicle start event technician should call GM General Motors Technical Assistance Center. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.