# P1EAB on the 2015 Chevrolet Spark

The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.

This code is specific to a manufacturer and is not described here.

## Bulletins for this model year that name P1EAB

- [10123241](https://open.wenmarpro.com/bulletins/10123241), 2017-11-14: This Preliminary Information communication provides information to the technician about vehicles that may have a Service Vehicle Soon on, a Reduced Power Mode Message, or the vehicle will not start. Technician may find Diagnostic Trouble Code P1EAB stored. Technician should not clear the Diagnostic Trouble Code. Technician will need to use Global Diagnostic System 2 to review Hybrid Powertrain Control Module 2 Freeze Frame / Failure Records for DTC P1EAB. If the maximum cell voltage is not greater than 4.58 V, check to see if the Battery Engine control Module has the latest Service Programming System calibration. If there is a new calibration available for the battery engine control module then the module should be updated. If the battery engine control module cell voltage displayed in the Freeze Frame / Failure Records or the live cell voltage is over 4.58V, then follow currently published in Service Information. If the latest calibration is already installed or the battery engine control module has been reprogrammed previously and the concern is intermittent, contact General Motors Technical Assistance Center for further assistance.
- [10119037](https://open.wenmarpro.com/bulletins/10119037), 2017-10-15: This Preliminary Information communication provides information to the technician about vehicles that may have a Service Vehicle Soon on, a Reduced Power Mode Message, or the vehicle will not start. Technician may find Diagnostic Trouble Code P1EAB stored. Technician should not clear the Diagnostic Trouble Code. Technician will need to use Global Diagnostic System 2 to review Hybrid Powertrain Control Module 2 Freeze Frame / Failure Records for DTC P1EAB. If the maximum cell voltage is not greater than 4.58 V, check to see if the Battery Engine control Module has the latest Service Programming System calibration. If there is a new calibration available for the battery engine control module then the module should be updated. If the battery engine control module cell voltage displayed in the Freeze Frame / Failure Records or the live cell voltage is over 4.58V, then follow currently published in Service Information. If the latest calibration is already installed or the battery engine control module has been reprogrammed previously and the concern is intermittent, contact General Motors Technical Assistance Center for further assistance.
- [10114384](https://open.wenmarpro.com/bulletins/10114384), 2017-08-15: This Preliminary Information communication provides information to the technician about vehicles that may have a Service Vehicle Soon on, a Reduced Power Mode Message, or the vehicle will not start. Technician may find Diagnostic Trouble Code P1EAB stored. Technician should not clear the Diagnostic Trouble Code. Technician will need to use Global Diagnostic System 2 to review Hybrid Powertrain Control Module 2 Freeze Frame / Failure Records for DTC P1EAB. If the maximum cell voltage is not greater than 4.58?V, check to see if the Battery Engine control Module has the latest Service Programming System calibration. If there is a new calibration available for the battery engine control module then the module should be updated. If the battery engine control module cell voltage displayed in the Freeze Frame / Failure Records or the live cell voltage is over 4.58V, then follow currently published in Service Information. If the latest calibration is already installed or the battery engine control module has been reprogrammed previously and the concern is intermittent, contact General Motors Technical Assistance Center for further assistance.
- [10089833](https://open.wenmarpro.com/bulletins/10089833), 2017-01-30: 15338 \- SERVICE UPDATE. THIS BULLETIN PROVIDES A SERVICE PROCEDURE TO REPROGRAM THE BATTERY ENERGY CONTROL MODULE \(BECM\) ON CERTAIN 2015 MODEL YEAR CHEVROLET SPARK EV VEHICLES. IN THESE VEHICLES, A SOFTWARE ANOMALY CAN CAUSE A REDUCTION IN ELECTRIC POWER FROM 120KW TO 50KW, WHICH CAN LIMIT THE VEHICLE’S DRIVING RANGE TO 6.5 MILES \(10 KM\) \(HOWEVER ACTUAL RANGE MAY BE LESS\), SET DTC P1EAB, AND CAUSE THE VEHICLE TO FAIL TO START AT THE NEXT KEY/POWER ON CYCLE.