WenmarOpen by Wenmar Pro

Service bulletins for the 2020 Chevrolet Silverado

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

2120 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
PIE05462019-12-16. Service bulletin. ELECTRICAL SYSTEM. This engineering information (EI) bulletin is requesting information from the field on conditions of Service Engine Soon (SES) Lamp Illuminated, DTCs B2B0D and/or B2B0E Central Gateway Module Codes Unable to Communicate with HSLAN or LSLAN. Eng is attempting to root cause condition and validate a field fix.
PIE05442019-12-16. Service bulletin. ENGINE; ELECTRICAL SYSTEM. This engineering informational bulletin is requesting information on vehicles with the Service Engine Soon (SES) lamp being illuminated and DTC P1467 set.
PIP56902019-12-09. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. This Preliminary information communicates to dealer technicians there is a software anomaly not allowing the air filter life to be reset.
19NA2282019-11-25. Service bulletin. ELECTRICAL SYSTEM. This technical provides a procedure to locate, disconnect and re-connect the TCM electrical connector if found the cause of the customers concerns.
PIE0515A2019-11-25. Service bulletin. ELECTRICAL SYSTEM. This engineering informational bulletin is requesting information for checking for DTCs and the voltage (relative to a ground) on BOTH sides of the 400A starter fuse in the Battery Distribution Engine Compartment Fuse Block.
N1922667512019-11-12. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ENGINE AND ENGINE COOLING. N192266751 - Service Update (9 VINs moved from N192266750 due to different procedure). On certain vehicles that are equipped with a 6.6L diesel engine, may have one or more of the following conditions exist: 1.The instrument panel cluster may incorrectly display the message ?DEF Low? when a diesel engine fluid (DEF) controller internal fault is detected (DTC P20FF), instead of displaying the proper ?Service DEF System? message. 2.The customer may complain of excessive engine fan noise at a low vehicle speed. 3.Under certain conditions, the diagnostic system may set one of the following DTC?s when there is no problem with a component: (P20EE, P226D, P16F3 and P129F). Dealers are to reprogram the engine control module.
PIT5288H2019-11-12. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that may have any of these concerns remote keyless entry, passive Entry and Start Inoperative, No Fob detect message on driver information center, service tire pressure system, no audio, touch screen Inoperative, Steering Wheel Controls Inoperative, Service Stabilitrak, rear power windows inoperative, rear wiper inoperative, and or a dead battery. Technician may find Diagnostic Trouble Codes B3101, B144C, C0710, C0544, U1548, U1549, U154A, U0151, U0126, U0415, U0077, U0028 and/or U0029. Technician should inspect the left instrument panel for the wire harness being pinched. Technician will need to repair the wire harness and reroute the wire harness.
PIP56852019-11-12. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. This Preliminary information communicates A vehicle with a customer concern of a SES P0128, Engineering is aware of the concern and working on the a repair. At this time clear the codes and do not replace the thermostat for this concern. There will be a calibration released for the concern in this near future. This PI will be updated when the calibration is released.
PIT57152019-11-12. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information provides information to the technician about a additional diagnostic tip for a check engine lamp for DTC p3055 and P3056 and the start/Stop being inoperative.
PIT5702A2019-11-12. Service bulletin. ELECTRICAL SYSTEM. This Preliminary information communication provides information to the technician on installing Regular Production Option Code 9L7 Up-fitter Auxiliary Switches. Technician will need to reference the latest version of General Motors Up-fitter Integration Bulletin 153. The information can be found at http://www.gmupfitter.com/ under the "Technical Bulletin" Tab and then "Show all bulletins."
PIP56822019-11-12. Service bulletin. ELECTRICAL SYSTEM. This Preliminary information communicates the potential for DTCs P2C7A and/or P14D9 to set, the current procedure to clear them and that an ECM calibration is being developed.
PIP5664B2019-10-15. Service bulletin. ELECTRICAL SYSTEM. This Preliminary information communicates to the dealer technician to check for any new ECM calibration updates for DTCs P129F P16F3 P20EE P20FF P226D P249D P249E P11CC and / or P11D5 set.
PIP4670H2019-10-15. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about a no start or another concern after swapping an Engine Control Module or other modules from one vehicle to another. The Global Architecture electrical system associated with these vehicles does not allow controller swaps between vehicles.
PIT57112019-10-15. Service bulletin. ELECTRICAL SYSTEM. This Preliminary information communicates information for the dealer to reprogram the IPC to correct the Off-Road Mode not being able to be selected using the Driver Mode Control Switch.
PIP56752019-10-15. Service bulletin. ELECTRICAL SYSTEM. This Preliminary information communicates to the dealer that a customer may comment that the MIL light is illuminated. The technician may find P1098 and/or P26BB set current or history. That this may be caused by a software anomaly, and that GM is currently looking into the issue. It provides testing and related direction based on the results.
PIP56732019-10-15. Service bulletin. ELECTRICAL SYSTEM. This Preliminary information communicates advises the technician that the ECM part number will be placed on a parts restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.
PI0592E2019-09-23. Service bulletin. ELECTRICAL SYSTEM. This preliminary information bulletin provides information om Service Programming System (SPS) Error Codes E4398, E4399, E4403, M4404, M4413, E4414, E4423, E4491 or E6961).
PIP56642019-09-16. Service bulletin. ENGINE; ELECTRICAL SYSTEM. This Preliminary information communicates to the dealer technician the procedures for DTC P11CC, P226D, P249E, P249D, P20EE or P226D while engineering is investigating.
100845001G2019-07-29. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. This bulletin provides information for electrical ground repairs using new General Motors replacement fasteners with conductive finish.
060847001O2019-07-29. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM. This bulletin explains the labor operation numbers used for submitting warranty claims for module reprogramming and not when replacing a module.
030603004Y2019-05-20. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
090089002Q2019-04-22. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT; ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY. This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before sold (prepping) to the customer.
PIT5386E2019-04-08. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that are found to have a back-up alarm inoperative during the Pre-Delivery Inspection. On trucks equipped with the Back Up Alarm (RPO 8S3), the alarm will be intentionally left disconnected from the assembly plant. Technician will reroute the harness and plug it in.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.