WenmarOpen by Wenmar Pro

Service bulletins for the 2020 Chevrolet Silverado

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

2120 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Driver assistance are shown. Show all

Bulletins, newest first
20NA0362020-06-22. Service bulletin. STRUCTURE:BODY:TAILGATE; BACK OVER PREVENTION: CAMERA SYSTEM. This informational bulletin provides information for dealers/technicians on Rear Camera Gridlines Incorrect, Misaligned, Offset, Incorrect Camera View after Replacing the Tailgate Handle or Entire Tailgate.
PIT5686A2020-06-15. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM. This Preliminary information communication provides information to the technician on installing Regular Production Option Code UVC Rearview Camera. Technician will need to reference the latest version of General Motors Up-fitter Integration Bulletin 150. The information can be found at http://www.gmupfitter.com/ under the "Technical Bulletin" Tab and then "Show all bulletins."
PIT57442020-06-15. Service bulletin. VISIBILITY; BACK OVER PREVENTION. This Preliminary information communicates information on how to disable the Side Blind Zone Detection and Park Assist systems when a customer removes the pickup box from the vehicle to install an aftermarket bed or body.
PIP5653F2020-06-15. Service bulletin. BACK OVER PREVENTION. This Preliminary information communicates that engineering has developed a repair for a chirp noise associated with the front axle assembly.
20NA0922020-05-26. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; BACK OVER PREVENTION; EQUIPMENT. This technical bulletin provides repair information to correct a customer concern of Camera Display View Showing Wrong Make of Vehicle.
PIT4322K2020-05-11. Service bulletin. ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC). This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in-depth diagnostics are performed.
PIT5721A2020-03-09. Service bulletin. ELECTRICAL SYSTEM; LANE DEPARTURE: LANE KEEP: STEERING ASSIST. This Preliminary Information communication provides information to the technician about vehicles that have Lane Keep Assist inoperative with the lane keep assist switch LED is always on and the lane keep assist Icon is not illuminated on the IPC after a programming event. Technician will need to ensure that the Front View Camera Module has been properly SPS programmed and SPS configured. Technician will also perform the "Front View Camera Module Calibration" procedure using Global Diagnostic System 2.
20NA0222020-03-09. Service bulletin. BACK OVER PREVENTION; WHEELS. This technical bulletin provides a procedure to re-torque the leaf spring u bolts to correct a condition of Clunking Noise from Rear of Vehicle (Re-torque Leaf Spring Bolts).
PIT57212019-12-09. Service bulletin. LANE DEPARTURE. This Preliminary Information communication provides information to the technician about vehicles that have Lane Keep Assist inoperative with the lane keep assist switch LED is always on and the lane keep assist Icon is not illuminated on the IPC after a programming event. Technician will need to ensure that the Front View Camera Module has been properly SPS programmed and SPS configured. Technician will also perform the "Front View Camera Module Calibration" procedure using Global Diagnostic System 2.
PIT5527C2019-12-09. Service bulletin. LANE DEPARTURE. This Preliminary Information communication provides information to the technician about vehicles that show a "Take Steering" message on the Driver Information Center along with a warning chime/alert. Dealer should be advised the purpose of the message is to alert the driver that the Lane Keep Assist system has not detected active steering input from the driver (hands off the steering wheel).
PIT5551E2019-11-12. Service bulletin. FORWARD COLLISION AVOIDANCE. This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert".
PIT5551E2019-10-15. Service bulletin. FORWARD COLLISION AVOIDANCE. This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert".
PIT56972019-08-12. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This Preliminary information communication provides information to the technician on installing Regular Production Option Code UVC Rearview Camera. Technician will need to reference the latest version of General Motors Up-fitter Integration Bulletin 152. The information can be found at http://www.gmupfitter.com/ under the "Technical Bulletin" Tab and then "Show all bulletins."
PIT5386E2019-04-08. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that are found to have a back-up alarm inoperative during the Pre-Delivery Inspection. On trucks equipped with the Back Up Alarm (RPO 8S3), the alarm will be intentionally left disconnected from the assembly plant. Technician will reroute the harness and plug it in.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.