WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Chevrolet Malibu

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

2002 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
12-06-01-003B2017-08-15. Service bulletin. ENGINE. This informational bulletin provides information for repairing engine front cover oil leak, sealing surface preparation and applying RTV sealant.
15-00-90-0012017-08-15. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides technicians with diagnostic tips for preventing oil leaks after changing oil and filter.
07-06-04-019E2017-08-15. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. This technical bulletin provides repair information for repairing the IP to body harness connector to correct a customer concern for intermittent Malfunction Indicator Lamp (MIL) illuminated with Reduced Engine Power displayed and DTC P2138 set.
15-00-89-004A2017-08-15. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered seepage.
00-06-01-026F2017-08-15. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information to technicians regarding intake manifold inspection/replacement after severe internal engine damage.
PI1407B2017-08-15. Service bulletin. ENGINE. This preliminary informational bulletin provides diagnostic and repair information to correct a customer concern of a loud engine whine noise.
13-00-90-002A2017-08-15. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin communicates Information to dealership personnel that vehicles factory filled with dexos1 5W-20 oil are approved to substitute dexos1 0W-20 oil as optional top off and service fill.
PI1407A2017-08-15. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT:MECHANICAL. This preliminary informational bulletin provides repair information to correct a customer concern of a loud engine whine noise.
PI1171A2017-08-15. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ENGINE AND ENGINE COOLING. This preliminary informational bulletin provides diagnosis and repair information regarding bearing damage or when an engine will not rotate.
PI14072017-08-15. Service bulletin. ENGINE AND ENGINE COOLING. This preliminary informational bulletin provides repair information to correct a customer concern about a loud whine noise coming from the engine. The frequency of the noise increases and decreases with the engine RPM.
06-00-89-026L2017-08-15. Service bulletin. SERVICE BRAKES; EQUIPMENT:ELECTRICAL; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; EQUIPMENT:APPLIANCE:AIR CONDITIONER; POWER TRAIN:AXLE ASSEMBLY; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. This warranty administration bulletin provide policy information on a revised customer concern not duplicated/verified labor operation numbers and how to submit CCND.
06-06-01-010B2017-08-15. Service bulletin. EQUIPMENT:MECHANICAL; ENGINE AND ENGINE COOLING. This informational bulletin provides information on close-coupled converter and engine replacement.
PIP5029H2017-08-15. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician about vehicles that have a Malfunction Indicator Lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need to perform published Service Information diagnostics. If technician finds carbon, an upper engine and valve cleaning should be performed. Update added part numbers for the cleaner and model years.
PIC5696A2017-08-15. Service bulletin. ENGINE; ELECTRICAL SYSTEM. This Preliminary Information communication advises the technician that the Engine Control Module will no longer be on restriction through the General Motors Product Quality Center. Dealer can now order part through the normal Customer Care and Aftersales parts process.
PIP4989C2017-08-15. Service bulletin. SUSPENSION; ENGINE AND ENGINE COOLING. This Preliminary Information communication provides the technician with the steps to diagnose and repair a vehicle with a broken, noisy, worn or misaligned Drive Motor Generator belt resulting in a no charge concern. Dealer will follow the instructions to replace the belt if broken and use a laser belt alignment tool to correctly align the new belt. Inspect the drive belt tensioner strut assembly to ensure that it is installed correctly. If the strut is upside down remove and install correctly.
PIC5764A2017-08-15. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician about vehicles that have an engine overheats ?A/C Off? or ?High Engine Temperature? Messages are displayed on the Instrument Panel Cluster poor heater performance after extended idling, or cruising at low revolutions per minute for extended period. Technician may find Diagnostic Trouble Code P00B7 or P2181 may be set in the Engine Control Module. Technician will need to check the water outlet for plastic flashing and/or debris by remove the water outlet attached to the rear of the cylinder head. Technician will need clean or replace the water outlet as needed.
PIP4495D2017-08-15. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician about vehicles that have a loud tick or rattle noise under the hood at all operating conditions. Technician will need to check the lower and oil pressure to the upper end oil pressure. Technician will need to inspect the oil feed orifice in the cylinder head. Technician will clean out and debris found in the orifice.
PIT3173C2017-08-15. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician that fluid contamination may be directed to one of the following testing centers according to the type of fluid needing testing. Dealer should send the correct fluid to the proper testing center.
PIC57572017-08-15. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles may indicate the blower motor is inoperative and/or there is water in the blower control module motor area. Technician will add a closed cell foam strip to the plenum water deflector.
PIC57642017-08-15. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; EQUIPMENT:APPLIANCE:AIR CONDITIONER; ENGINE AND ENGINE COOLING:COOLING SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that have an engine overheats "A/C Off" or "High Engine Temperature" Messages are displayed on the Instrument Panel Cluster poor heater performance after extended idling, or cruising at low revolutions per minute for extended period. Technician may find Diagnostic Trouble Code P00B7 or P2181 may be set in the Engine Control Module. Technician will need to check the water outlet for plastic flashing and/or debris by remove the water outlet attached to the rear of the cylinder head. Technician will need clean or replace the water outlet as needed.
PIP51622017-08-15. Service bulletin. EQUIPMENT:MECHANICAL; ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about vehicles that have a Malfunction Indicator Lamp on. Technician will find Diagnostic Trouble Code P0011 and or P0014. Technician will need to remove the camshaft solenoids and inspect the screens for debris. Technician will need to clean off the screens with brake cleaner if debris is present. If code resets or the screen did not have debris on them, remove the camshaft actuator associated with the Diagnostic Trouble Codes and with light air pressure, blow out the oil passages through the camshaft actuator solenoid port. Lubricate the camshaft solenoid seal(s) with clean engine oil and reinstall and install a new camshaft actuator associated with the Diagnostic Trouble Code.
PIC5720A2017-08-15. Service bulletin. ELECTRICAL SYSTEM:WIRING; EQUIPMENT:APPLIANCE:AIR CONDITIONER; ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS. This Preliminary Information communication provides information to the technician on the steps needed to diagnose and repair vehicles that may have buzz or hum noise is heard in the right front at times. Also may have a Antilock Braking System Malfunction Indicator Lamp, Service Brake Assist Message or Service Engine Soon Malfunction Indicator Lamp may be displayed. The following Diagnostic Trouble Code may be set C027B, C0040 and P0CBE. The technician will inspect for the wire harness under the hood to be contacting the crank pulley, air conditioning compressor pulley or accessory drive belt due to misrouting or not secured properly. Repair wiring as needed or replace the harness, correct routing and properly secure. Once wiring repairs are complete confirm proper brake booster vacuum pump operation.
PIP51632017-08-15. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
06-06-01-010C2017-08-15. Service bulletin. ENGINE. This informational bulletin provides information on close coupled converters and there affect on newly installed engines or engines during there break in period.
PIP52262017-08-15. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.