Service bulletins for the 2019 Chevrolet Express
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
766 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| 17NA222 | 2019-10-28. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. This technical bulletin provides a procedure to replace the turbocharger for vehicles with a condition of Turbocharger Whine Noise due to the blades on the turbo being bent. |
|---|---|
| 17NA194 | 2019-10-28. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin advises the technician to test the induction system for leaks for any of the codes listed. |
| 17NA114 | 2019-10-28. Service bulletin. ENGINE AND ENGINE COOLING. This technical bulletin provides a procedure to Tighten the Charge Air Cooler Duct Clamp to correct a condition of an oil leak originating from either the inlet or outlet duct of the turbocharger due to the charge air cooler pipe clamp not being tightened properly. |
| 17NA073 | 2019-10-28. Service bulletin. EQUIPMENT. This warranty administration bulletin provides information regarding the field action courtesy transportation policy. |
| 16NA325 | 2019-10-28. Service bulletin. ELECTRICAL SYSTEM. This technical bulletin provides a procedure on how to properly identify if there is any aftermarket calibrations loaded on the ECM or and detection of a power up hardware installed. |
| PIP4670H | 2019-10-15. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about a no start or another concern after swapping an Engine Control Module or other modules from one vehicle to another. The Global Architecture electrical system associated with these vehicles does not allow controller swaps between vehicles. |
| PIP5630C | 2019-10-15. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates A vehicle may have a concern of no oil pressure and/or P0521 set. the releif valve in the pump is sticking or the number 1 main bearing is damaged. Drop oil pan and confirm #1 main is spun or not. If bearings are OK Then change oil pump. |
| PIE0529 | 2019-09-23. Service bulletin. POWER TRAIN. This engineering information bulletin is requesting information from the field to validate a field fix. Before contacting engineers, remove the transmission oil pan and inspect for nickel to quarter size pieces of aluminum debris in the oil pan. The 2-3-4-6-8 and 4-5-6-7-8 reverse clutch assembly and the 1-3-5-6-7 clutch assembly may be broken in several pieces. |
| PI0592E | 2019-09-23. Service bulletin. ELECTRICAL SYSTEM. This preliminary information bulletin provides information om Service Programming System (SPS) Error Codes E4398, E4399, E4403, M4404, M4413, E4414, E4423, E4491 or E6961). |
| 130089008B | 2019-09-23. Service bulletin. EQUIPMENT. This bulleting provides Wiring, Terminal and Connector Repair Information including how to determine the Service Part Number in eSI and how to locate the part(s) in the EPC. |
| 090604026R | 2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2. |
| 080730026F | 2019-09-23. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped. |
| 070601016F | 2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement. |
| 000601026M | 2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage. |
| 19NA179 | 2019-09-23. Service bulletin. EQUIPMENT. This technical bulletin provides repair information to correct a customer concern of the air conditioning changes intermittently, from blowing cold to blowing warm air. |
| 19NA153 | 2019-09-23. Service bulletin. POWER TRAIN. This technical bulletin provides a procedure to replace the torque converter and inspect the front pump and the TEHCM for metal. |
| 18NA146 | 2019-09-23. Service bulletin. EQUIPMENT. This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only). |
| 16NA380 | 2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE. This informational bulletin provides a procedure on how to perform a quick test to check if the DPF is the cause of excessive soot from the tailpipe. |
| 16NA109 | 2019-09-23. Service bulletin. STEERING. This technical bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear. |
| PIP5630B | 2019-09-16. Service bulletin. FUEL SYSTEM, GASOLINE; ENGINE. This Preliminary information communicates A vehicle may have a concern of no oil pressure and/or P0521 set. the releif valve in the pump is sticking or the number 1 main bearing is damaged. Drop oil pan and confirm #1 main is spun or not. If bearings are OK Then change oil pump. |
| PIT5703 | 2019-09-16. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA; EQUIPMENT. This Preliminary information communication provides information to the technician on installing Regular Production Option Code UVC Rearview Camera. Technician will need to reference the latest version of General Motors Up-fitter Integration Bulletin 151. The information can be found at http://www.gmupfitter.com/ under the "Technical Bulletin" Tab and then "Show all bulletins." |
| 19NA153 | 2019-08-26. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This technical bulletin provides a procedure to replace the torque converter and inspect the front pump and the TEHCM for metal. |
| PI1344C | 2019-08-19. Service bulletin. POWER TRAIN. This preliminary informational bulletin adds the 2016 model year to diagnostic tips and repair information to correct a customer concern of reduced acceleration at low speed and/or transmission slipping from a launch, DTC P0751 set. |
| 990089019R | 2019-08-19. Service bulletin. EQUIPMENT. This informational bulletin provides process information for the (GWM) and (WPC) parts return program. |
| PIP5630A | 2019-08-12. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates A vehicle may have a concern of no oil pressure and/or P0521 set. the releif valve in the pump is sticking or the number 1 main bearing is damaged. Drop oil pan and confirm #1 main is spun or not. If bearings are OK Then change oil pump. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.