Service bulletins for the 2014 Chevrolet Cruze
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
1920 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| 16NA109 | 2021-05-03. Service bulletin. STEERING. This service bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear. |
|---|---|
| 29400-01 | 2021-04-30. Service bulletin. FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY. Condition On certain 2013-2015 model year Chevrolet Express, Chevrolet Silverado HD, GMC Savana, GMC Sierra HD, and 2014-2015 model year Chevrolet Cruze vehicles that are equipped with a diesel engine (RPO LML/LGH/LUZ), a malfunction-indicator light (MIL) may illuminate due to an offset in the temperature sensor in the diesel-emission-reduction fluid (DEF) tank reservoir or increased DEF tank-heater resistance. Special Coverage Adjustment This special coverage covers the condition described above for a period of 10 years or 120,000 miles (193,000 km), whichever occurs first, from the date the vehicle was originally placed in service, regardless of ownership. For vehicles covered by Vehicle Service Contracts, all eligible claims with repair orders on or after November 17, 2016, are covered by this special coverage and must be submitted using the labor operation codes provided with this bulletin. Claims with repair orders prior to November 17, 2016, must be submitted to the Service Contract provider. Correction Dealers are to replace the DEF tank reservoir. The repairs will be made at no charge to the customer |
| PIE0279 | 2021-04-29. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY:SUN/MOON ROOF ASSEMBLY. Engineering Information – Sunroof or Sunshade Inoperative, DTC U151B Set Condition Important: If the customer did not bring their vehicle in for this concern, DO NOT proceed with this EI. Some customers may comment that the sunroof or shade is inoperative when the sunroof switch is pressed. When checking the vehicle for DTCs, the BCM may report U151B current or in history. Cause GM Engineering is attempting to determine the root cause of the above condition. Engineering has a need to gather information on vehicles PRIOR to repair that may exhibit this condition. As a result, this information will be used to "root cause" the customer's concern and develop/validate a field fix. |
| PI0928B | 2021-04-27. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE AND ENGINE COOLING. Bump, Surge or Vibration at Idle in Drive at a Stop Condition/Concern Some customers may comment on a bump feeling, a surge or an engine vibration while stopped at idle with the transmission in Drive and their foot on the service brake |
| PI0653A | 2021-04-26. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. Damaged, Disassembled or Improperly Packaged Turbochargers Returned to Warranty Part Center A Service Agent (Dealer) during vehicle service may need to replace an engine turbocharger (TC). Any turbocharger that is returned to the Warranty Parts Center (WPC) will be inspected by engineering for root cause failure. The Warranty Part Center (WPC) has received turbochargers returned by Service Agents that have been disassembled, damaged during removal from the engine, electrical harnesses or connectors that have been cut or removed from the turbocharger and/or improperly packaged turbochargers resulting in shipping damage. |
| PI0281D | 2021-04-26. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy. |
| PI0281D | 2021-04-26. Service bulletin. STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS; EQUIPMENT ADAPTIVE/MOBILITY. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy. |
| 99-08-51-007F | 2021-04-26. Service bulletin. EQUIPMENT; WHEELS; EQUIPMENT ADAPTIVE/MOBILITY. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin. |
| 99-08-51-007F | 2021-04-26. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; WHEELS; EQUIPMENT. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin. |
| 07-08-49-020J | 2021-04-20. Service bulletin. ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system (SPS). 2. Odometer setup at the electronic service center (ESC) when using an exchange IPC/DIC. 3. Tech 2® – The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or driving the vehicle. *The odometer programming is integrated as part of the BCM programming procedure. It is not a stand-alone event. |
| 06-00-89-031D | 2021-04-20. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification |
| PIP5163E | 2021-04-19. Service bulletin. FUEL SYSTEM, GASOLINE. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure. |
| PIC5260D | 2021-04-19. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY. This Preliminary Information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks. |
| PIP5540G | 2021-04-19. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:PRESSURE/TEMPERATURE SENSOR. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance. |
| PIP5495M | 2021-04-19. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER; EXTERIOR LIGHTING. This Preliminary Information communication provides information to the technician about vehicles that may have a Malfunction Indicator Lamp on. The technician may find Diagnostic Trouble Codes P0299 or P0234 set. The technician is provided with a list of causes of misdiagnosis leading to returned Turbochargers with no trouble found. The purpose of this information is to reduce the number of no trouble found (NTF) turbochargers being returned to the WPC by informing the Service Department personnel of what inspections and/or diagnosis to perform, prior to replacing and returning a turbocharger to the WPC. |
| PIP5725A | 2021-04-19. Service bulletin. EQUIPMENT. This Preliminary information communicates the use of Winter grade fuel during the warm months of 2020 and the potential rivability issues that it can cause. The ongoing Coronavirus (COVID-19) pandemic has caused significant reductions in driving and fuel use. Due to the surplus of winter grade fuel sitting in storage (pipelines/stations) the EPA is waiving the fuel vapor requirement. This will extend the use of winter fuel into the summer months. The drivability concerns should not be single events but should be multiple occurrences associated with hot days. |
| 150089005A | 2021-04-16. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. Essential Tools that Include Consumable Parts (U.S. Only) |
| 150089004B | 2021-04-16. Service bulletin. SUSPENSION:FRONT:SHOCK ABSORBER; SUSPENSION:FRONT:MACPHERSON STRUT; SUSPENSION:REAR:SHOCK ABSORBER. Information Regarding the Differences Between Fluid Leakage and Seepage This bulletin is intended to help identify the differences between what is considered a fluid leak and what is considered seepage. Improper diagnosis may lead to unnecessary component replacement. Use the following information to determine if the condition is normal acceptable seepage or a defective component |
| 140089004D | 2021-04-16. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. Information for Fleet Vehicles – Ignition Key, Fob and Key Rings Configuration Some Customers are bundling multiple keys, fobs, and key tags together on a single crimped loop or a cable. This practice may result in unintended key rotation, and should be discontinued immediately. The information in this bulletin details the proper configurations for the ignition key, fob, key rings and key tags and applying a QR code sticker or barcode sticker to a key fob. |
| 140089004D | 2021-04-16. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. Information for Fleet Vehicles – Ignition Key, Fob and Key Rings Configuration Some Customers are bundling multiple keys, fobs, and key tags together on a single crimped loop or a cable. This practice may result in unintended key rotation, and should be discontinued immediately. The information in this bulletin details the proper configurations for the ignition key, fob, key rings and key tags and applying a QR code sticker or barcode sticker to a key fob. |
| 070849020M | 2021-04-16. Service bulletin. ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER:SENSOR/SENDING UNIT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. IPC Odometer Programming Method Quick Reference Guide |
| 150089004C | 2021-03-08. Service bulletin. SUSPENSION:FRONT:MACPHERSON STRUT; SUSPENSION:FRONT:SHOCK ABSORBER; POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT. This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. |
| 21NA026 | 2021-03-08. Service bulletin. EQUIPMENT; STRUCTURE; EQUIPMENT ADAPTIVE/MOBILITY. This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen. |
| 010601011L | 2021-03-01. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION; EQUIPMENT. This informational bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption. |
| 20NA159 | 2021-02-22. Service bulletin. TIRES. This Warranty Administration bulletin is for information on General Motors New Vehicle Tire Warranty Program (U.S. Dealers Only). |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.