WenmarOpen by Wenmar Pro

Service bulletins for the 2010 Chevrolet Cruze

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

277 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
99-08-51-007F2021-04-26. Service bulletin. EQUIPMENT; WHEELS; EQUIPMENT ADAPTIVE/MOBILITY. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin.
99-08-51-007F2021-04-26. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; WHEELS; EQUIPMENT. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility — Outside Company later in this bulletin.
15-NA-0792021-04-20. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. OnStar® Voice Fallback Number Update Some customers may have received a letter from OnStar® stating that "We recently tried to provide a software update to the OnStar® hardware in your vehicle. However, your system could not be updated remotely. As a result, some of your OnStar® system functions may not be working as expected." The customer is further instructed in this letter to "Please contact your dealer – or any dealer near you – as soon as possible to schedule an appointment for this no-cost software update. Your dealer will reprogram your OnStar® module with an update. This is for vehicles that have previously received the Canada upgrade as described in Service Bulletin #15-08-44-001F."
07-08-49-020J2021-04-20. Service bulletin. ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system (SPS). 2. Odometer setup at the electronic service center (ESC) when using an exchange IPC/DIC. 3. Tech 2® – The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or driving the vehicle. *The odometer programming is integrated as part of the BCM programming procedure. It is not a stand-alone event.
06-00-89-031D2021-04-20. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
150089005A2021-04-16. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. Essential Tools that Include Consumable Parts (U.S. Only)
150089004B2021-04-16. Service bulletin. SUSPENSION:FRONT:SHOCK ABSORBER; SUSPENSION:FRONT:MACPHERSON STRUT; SUSPENSION:REAR:SHOCK ABSORBER. Information Regarding the Differences Between Fluid Leakage and Seepage This bulletin is intended to help identify the differences between what is considered a fluid leak and what is considered seepage. Improper diagnosis may lead to unnecessary component replacement. Use the following information to determine if the condition is normal acceptable seepage or a defective component
070849020M2021-04-16. Service bulletin. ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER:SENSOR/SENDING UNIT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. IPC Odometer Programming Method Quick Reference Guide
PIT3271K2020-12-14. Service bulletin. WHEELS; TIRES. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
16NA3832020-06-22. Service bulletin. ENGINE; FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY. This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
PI0281H2020-06-01. Service bulletin. STRUCTURE:BODY; EQUIPMENT ADAPTIVE/MOBILITY. This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
060089029Q2020-06-01. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. This informational bulletin provides information on interior cleaning products and what is offered to clean the interiors of GM vehicles.
16NA3832020-03-02. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM. This informational bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
070849020P2019-04-22. Service bulletin. EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This informational bulletin provides information for the IPC odometer programming method quick reference guide.
08-08-46-004A2018-05-21. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. This informational bulletin provides information regarding the aftermarket device interference with onstar diagnostic service.
PI08672018-05-21. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT. This preliminary informational bulletin provides daignostic tips for concerns regarding intermittent no crank and intermittent exhaust camshaft position sensor signal.
00-00-89-027G2018-05-21. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. This informational bulletin provides a step by step procedure on how to properly use the GM chemicals to eliminate unwanted odors in vehicles and which products to use for each application.
12-03-10-0022018-05-21. Service bulletin. EQUIPMENT; WHEELS. This informational bulletin provides a description of the proper wheel installation and proper wheel torque techniques used to install wheels onto vehicles
PI08502018-05-21. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY; EQUIPMENT. This preliminary informational bulletin provides a procedure for the replacement of the sunroof sunshade stricker for the conditions of Front Sunroof Sunshade Will Not Latch or is Difficult to Latch in the Closed Position
08-08-46-004A2018-05-21. Service bulletin. EQUIPMENT. This informational bulletin provides information regarding the aftermarket device interference with onstar diagnostic service.
PI08672018-05-21. Service bulletin. ENGINE AND ENGINE COOLING. This preliminary informational bulletin provides daignostic tips for concerns regarding intermittent no crank and intermittent exhaust camshaft position sensor signal.
00-00-89-027G2018-05-21. Service bulletin. EQUIPMENT. This informational bulletin provides a step by step procedure on how to properly use the GM chemicals to eliminate unwanted odors in vehicles and which products to use for each application.
12-03-10-0022018-05-21. Service bulletin. WHEELS. This informational bulletin provides a description of the proper wheel installation and proper wheel torque techniques used to install wheels onto vehicles
PI08502018-05-21. Service bulletin. LATCHES/LOCKS/LINKAGES; EQUIPMENT ADAPTIVE/MOBILITY; VISIBILITY:SUN/MOON ROOF ASSEMBLY. This preliminary informational bulletin provides a procedure for the replacement of the sunroof sunshade stricker for the conditions of Front Sunroof Sunshade Will Not Latch or is Difficult to Latch in the Closed Position
GCUS-9-26292017-12-22. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. 38170 - Special Coverage. The accelerator pedal can break at the stalk just below the housing due to the driver entering or exiting the vehicle with their foot resting on the accelerator pedal. If the pedal breaks, it would not be possible to operate the accelerator once the stalk has broken off. The vehicle would return to idle regardless of transmission gear position. If this condition occurs within the stated terms dealers will replace the accelerator pedal.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.