WenmarOpen by Wenmar Pro

Service bulletins for the 2021 Cadillac CT5

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

800 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
19NA2562021-12-20. Service bulletin. ENGINE. This service bulletin provides diagnostic aid information/procedures to perform inspections to determine if the engine needs to be replaced as opposed to just internal parts for knocking, rattle, squeak and/or squeal type noises from engine.
18NA0732021-12-20. Service bulletin. ENGINE. This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
PIT5841A2021-10-25. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates information on a No Crank / No Start concern caused by a No Fob Detected message caused by an internal fault of the BCM. Dealer is to replace the BCM to correct this concern.
21NA1472021-08-09. Service bulletin. ELECTRICAL SYSTEM:IGNITION:COIL:SPARK PLUGS; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; ENGINE AND ENGINE COOLING. This service bulletin provides a repair procedure to correct a customer concern of Coolant and/or Oil Leak, Malfunction Indicator Lamp (MIL) Illuminated?.
21NA1082021-07-19. Service bulletin. ENGINE; ENGINE AND ENGINE COOLING. This service bulletin provides diagnostic information for the technician regarding a customer concern of engine overheating, cooling system contaminated with engine oil.
19NA2562021-07-19. Service bulletin. ENGINE. This service bulletin provides diagnostic aid procedure to perform inspections to determine if the engine needs to be replaced as opposed to just internal parts for knocking, rattle, squeak and/or squeal type noises from engine.
19NA0442021-07-19. Service bulletin. ELECTRICAL SYSTEM; ENGINE. This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy.
21NA1302021-07-06. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides a repair procedure to correct a customer concern of Malfunction Indicator Lamp (MIL) Illuminated, DTC P31E8, P31DB, P31D4 and/or P31E2 Set.
21NA1082021-07-06. Service bulletin. UNKNOWN OR OTHER; ENGINE AND ENGINE COOLING. This service bulletin provides diagnostic information for the technician regarding a customer concern of engine overheating, cooling system contaminated with engine oil.
19NA2562021-07-06. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides diagnostic aid procedure to perform inspections to determine if the engine needs to be replaced as opposed to just internal parts for knocking, rattle, squeak and/or squeal type noises from engine.
19NA0442021-07-06. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy.
PIP58042021-06-14. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates the possibility of a inaccurate #1 Coolant Temperature Sensor causing the engine to run hot or overheat with possible over temperature message displayed on DIC
000601026N2021-06-07. Service bulletin. ENGINE. This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
PIC6433A2021-05-17. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY:MANAGEMENT SYSTEM/ENERGY CONTROL MODULE (BMS/BECM). This Preliminary information communicates that a service theft deterrent message may display with no DTC's. OnStar turned off the ECM read request to prevent re-occurrence.
20NA1382021-05-03. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global Warranty Management.
PIP5712B2021-04-19. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR; POWER TRAIN. This Preliminary information communicates to the technician a service Diagnostic / Repair tip to avoid causing the crankshaft sprocket to disengage from the crankshaft during crankshaft balancer or cam drive system component related service procedures.
PIC64332021-04-19. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE. This Preliminary information communicates that a service theft deterrent message may display with no DTC's. OnStar will turn of the ECM read request to prevent re-occurrence.
PIP5712A2021-04-19. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR. This Preliminary information communicates to the technician a service Diagnostic / Repair tip to avoid causing the crankshaft sprocket to disengage from the crankshaft during crankshaft balancer removal.
PIP5730B2021-04-19. Service bulletin. INTERIOR LIGHTING; ENGINE. This Preliminary information communicates additional diagnostic information for DTC's P0016 and P0018.
18NA0732021-03-01. Service bulletin. ENGINE. This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
090604026S2021-03-01. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE; EQUIPMENT. This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
010601011L2021-03-01. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION; EQUIPMENT. This informational bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
N2023205102021-03-01. Service bulletin. AIR BAGS; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE; EQUIPMENT. Customer Satisfaction Program. Certain vehicles, equipped with a gas engine, may have a condition in which the printed circuit board inside of the water pump may have been manufactured incorrectly potentially causing a water pump failure. The vehicle coolant system temperature is monitored and will display multiple warnings to the customer as coolant temperatures rise. At a set coolant temperature, the MIL will illuminate, DTC P2B85 will set in the engine control module (ECM), the oil pressure gauge will indicate high oil pressure and reduced torque with notification to the driver of reduced power will occur. If the customer continues to drive after this warning and the coolant temperature continues to rise, a chime will occur, the AC will be disabled and an additional message instructing the driver to idle will illuminate. If the customer continues to drive the vehicle after all previous warnings and the coolant temperature continues to rise a message the engine will shut down could occur, and the engine will be shut down. Dealers are to replace the water pump.
N2023205102021-02-22. Service bulletin. ENGINE AND ENGINE COOLING. Customer Satisfaction Program. Certain vehicles, equipped with a gas engine, may have a condition in which the printed circuit board inside of the water pump may have been manufactured incorrectly potentially causing a water pump failure. The vehicle coolant system temperature is monitored and will display multiple warnings to the customer as coolant temperatures rise. At a set coolant temperature, the MIL will illuminate, DTC P2B85 will set in the engine control module (ECM), the oil pressure gauge will indicate high oil pressure and reduced torque with notification to the driver of reduced power will occur. If the customer continues to drive after this warning and the coolant temperature continues to rise, a chime will occur, the AC will be disabled and an additional message instructing the driver to idle will illuminate. If the customer continues to drive the vehicle after all previous warnings and the coolant temperature continues to rise a message the engine will shut down could occur, and the engine will be shut down. Dealers are to replace the water pump.
N2023205102021-02-16. Service bulletin. LANE DEPARTURE; FUEL SYSTEM, GASOLINE; SERVICE BRAKES, HYDRAULIC; ELECTRICAL SYSTEM; AIR BAGS; ENGINE AND ENGINE COOLING; POWER TRAIN. Customer Satisfaction Program. Certain vehicles, equipped with a gas engine, may have a condition in which the printed circuit board inside of the water pump may have been manufactured incorrectly potentially causing a water pump failure. The vehicle coolant system temperature is monitored and will display multiple warnings to the customer as coolant temperatures rise. At a set coolant temperature, the MIL will illuminate, DTC P2B85 will set in the engine control module (ECM), the oil pressure gauge will indicate high oil pressure and reduced torque with notification to the driver of reduced power will occur. If the customer continues to drive after this warning and the coolant temperature continues to rise, a chime will occur, the AC will be disabled and an additional message instructing the driver to idle will illuminate. If the customer continues to drive the vehicle after all previous warnings and the coolant temperature continues to rise a message the engine will shut down could occur, and the engine will be shut down. Dealers are to replace the water pump.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.