WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Cadillac ATS

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

2400 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Transmission and driveline are shown. Show all

Bulletins, newest first
18207 022022-05-31. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING; WHEELS; FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY; STEERING:AUTOMATED/ADAPTIVE STEERING:MOTOR/ACTUATOR; STEERING; AIR BAGS. Customer Satisfaction. Certain vehicles may have a condition in which the power steering gear motor could separate from the steering gear housing due to corrosion of the attaching bolts. If the motor separates, power steering assist may be reduced or lost, and the driver may experience an unexpected increase in steering effort, especially at low speeds. Replace the bolts that attach the electric power steering motor to the steering gear and add a protective wax coating to each bolt and the seam around the electric power steering motor. If the bolts cannot be removed due to corrosion, the steering gear must be replaced. ** Revised Parts Information **
182072022-05-31. Service bulletin. POWER TRAIN; STEERING:ELECTRIC POWER ASSIST SYSTEM; FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY; WHEELS; STEERING; AIR BAGS; ENGINE AND ENGINE COOLING; STEERING:COLUMN. Customer Satisfaction. Certain vehicles may have a condition in which the power steering gear motor could separate from the steering gear housing due to corrosion of the attaching bolts. If the motor separates, power steering assist may be reduced or lost, and the driver may experience an unexpected increase in steering effort, especially at low speeds. Replace the bolts that attach the electric power steering motor to the steering gear and add a protective wax coating to each bolt and the seam around the electric power steering motor. If the bolts cannot be removed due to corrosion, the steering gear must be replaced.
PIP5790A2022-02-14. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. This Preliminary information communicates a corrosion, coolant / engine oil contamination concern of the terminals located in the ECM connectors. This document is an aide for technicians to diagnose and locate a resistance concern associated with these terminals. This condition can set various trouble codes and illuminate the MIL, make the engine stall or have a crank no start condition.
PIC5650J2021-09-13. Service bulletin. POWER TRAIN; AIR BAGS. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
06-00-89-031D2021-09-07. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN; ENGINE. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
990420002L2021-08-09. Service bulletin. POWER TRAIN:MANUAL TRANSMISSION; POWER TRAIN:AUTOMATIC TRANSMISSION; EQUIPMENT. This service bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operation.
080730035E2021-08-09. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; POWER TRAIN. This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
16NA3382021-05-24. Service bulletin. POWER TRAIN. This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns for Canadian Dealers only.
20NA1382021-05-03. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global Warranty Management.
PI11552021-04-28. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. Shudder Feeling While Driving in 40-80 km/h (25-50 mph) Range Condition/Concern Some customers may comment on a shudder feeling when driving, typically in the 40-80♦km/h (25-50♦mph) range. They may state that the condition feels like an engine misfire or like the car is driving over rumble strips on the road. This condition may be caused by a torque converter clutch (TCC) apply shudder.
PI11552021-04-28. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. Shudder Feeling While Driving in 40-80 km/h (25-50 mph) Range Condition/Concern Some customers may comment on a shudder feeling when driving, typically in the 40-80♦km/h (25-50♦mph) range. They may state that the condition feels like an engine misfire or like the car is driving over rumble strips on the road. This condition may be caused by a torque converter clutch (TCC) apply shudder.
PI1489A2021-04-26. Service bulletin. POWER TRAIN:MANUAL TRANSMISSION; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). Malfunction Indicator Lamp (MIL) Illuminated, Intermittently Unable to Shift into Reverse, DTC P0502 Set Condition/Concern Some customers may comment on a malfunction indicator lamp (MIL) illuminated. They may also comment that they intermittently are unable to shift into Reverse. When checking the vehicle for DTCs, the engine control module (ECM) may report P0502 as current or in history. This may be caused by water intrusion into the vehicle’s manual transmission output speed sensor or could be induced by the customer slipping the clutch for an extended period of time, as in holding the vehicle on a hill.
06-00-89-031D2021-04-20. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
PIP57902021-04-19. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. This Preliminary information communicates a corrosion, coolant / engine oil contamination concern of the terminals located in the ECM connectors. This document is an aide for technicians to diagnose and locate a resistance concern associated with these terminals. This condition can set various trouble codes and illuminate the MIL, make the engine stall or have a crank no start condition.
150089004C2021-03-08. Service bulletin. SUSPENSION:FRONT:MACPHERSON STRUT; SUSPENSION:FRONT:SHOCK ABSORBER; POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT. This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
060089031F2020-12-21. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. This service bulletin provides information on OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification.
1308116001F2020-12-07. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION. The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
16NA3382020-08-31. Service bulletin. ENGINE; POWER TRAIN. This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns for Canadian Dealers only.
20NA1382020-08-10. Service bulletin. POWER TRAIN. This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global Warranty Management.
PIP5429A2020-06-15. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. This Preliminary Information communication advises the technician that the customer may experience a 2-3 slip or flare after the vehicle has been sitting for a period of time. Technician can update the Transmission Control Module if working on a model year 2007. On all other model years dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.
990420002K2019-11-25. Service bulletin. POWER TRAIN. This informational bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operations.
16NA3382019-11-25. Service bulletin. POWER TRAIN. This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
080730026F2019-09-23. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
PI1344C2019-08-19. Service bulletin. POWER TRAIN. This preliminary informational bulletin adds the 2016 model year to diagnostic tips and repair information to correct a customer concern of reduced acceleration at low speed and/or transmission slipping from a launch, DTC P0751 set.
16NA3382019-07-29. Service bulletin. POWER TRAIN. This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.