WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Buick Regal

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1884 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
05-00-89-072F2022-10-11. Service bulletin. ENGINE AND ENGINE COOLING; FUEL SYSTEM, GASOLINE. This service bulletin provides the technician with additional information on fuels, fuel additives and fuel management.
04-06-04-051G2022-10-08. Service bulletin. ENGINE AND ENGINE COOLING; FUEL SYSTEM, GASOLINE. This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
01-06-01-011M2022-10-08. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
00-06-01-012L2022-10-08. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
16-NA-2222022-10-07. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations.
00-06-01-026P2022-09-30. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
20-NA-0652022-09-07. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides information on tools available to find an intake vacuum leak or exhaust leak to correct a condition of MIL Illuminated with Multiple Fuel Trim and/or Oxygen Sensor Codes Set.
19-NA-0442022-08-29. Service bulletin. ENGINE AND ENGINE COOLING; FUEL SYSTEM, GASOLINE. This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy.
12-01-37-001F2022-07-12. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM. This service bulletin provides information to dealership personnel on a new refrigerant (R1234yf) for A/C service.
22-NA-0092022-07-01. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
21-NA-0432022-06-02. Service bulletin. FUEL SYSTEM, GASOLINE; SERVICE BRAKES; ENGINE AND ENGINE COOLING; FUEL SYSTEM, DIESEL; WHEELS. This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer.
22NA0092022-05-31. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:FILTER/SCREEN. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
16NA2222022-05-31. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:FILTER/SCREEN; UNKNOWN OR OTHER. This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations.
12-00-89-003B2022-05-10. Service bulletin. EQUIPMENT:ELECTRICAL; ENGINE. This service bulletin provides policy information on warranty administration guidelines for multiple repairs with independent causes (GM Canada Dealers Only).
22-NA-0742022-04-06. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
22-NA-0092022-04-05. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
PIP5632F2022-02-14. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
PIP5628E2022-01-24. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
06-00-89-031D2021-09-07. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN; ENGINE. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
19NA0442021-07-19. Service bulletin. ELECTRICAL SYSTEM; ENGINE. This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy.
19NA0442021-07-06. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy.
000601026N2021-06-07. Service bulletin. ENGINE. This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
20NA1382021-05-03. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global Warranty Management.
PI11612021-04-29. Service bulletin. ENGINE; FUEL SYSTEM, OTHER:STORAGE:FUEL GAUGE SYSTEM. Fuel Gauge Does Not Read Full, Only Goes to 7/8 Full Condition/Concern Some customers may comment on the fuel gauge not reading full, only goes to 7/8 full. This condition may be caused by build variation of the fuel level sensor sending the incorrect fuel level value to the engine control module (ECM). Recommendation/Instructions A new fuel fill shutoff valve and fuel level sensor have been released to address this concern
06-00-89-031D2021-04-20. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.