WenmarOpen by Wenmar Pro

Service bulletins for the 2018 Buick LaCrosse

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

991 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
000601026M2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
090604026Q2019-07-29. Service bulletin. ENGINE; EQUIPMENT. This informational bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
19NA1042019-07-29. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY. This informational bulletin provides information for dealers/technicians and customers on steam/vapor coming from the front grille or radiator area.
16NA3832019-07-01. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. This informational bulletin advises of a new fuel injection kit used for decarbonizing the intake valves, and explains how toptier fuels should be used to reduce carbon build up.
PIP56402019-06-10. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician to not remove the torque converter bolts and start the engine as this may cause damage to the torque converter of the crankshaft on vehicles equipped with an automatic transmission.
PIP5226C2019-06-10. Service bulletin. EQUIPMENT; ENGINE. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
PIP5569A2019-06-03. Service bulletin. ENGINE; FUEL SYSTEM, GASOLINE. This Preliminary information communicates to the dealer an issue where the vehicle's engine may crank over unprompted and not start afterward. This is the result of hooking up the Active Fuel Injector Tool incorrectly on vehicles equipped with a direct fuel injection system. This Preliminary information instructs the dealer of a repair kit they received that will prevent this issue when installed correctly.
PIP4670F2019-06-03. Service bulletin. ENGINE; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about a no start or another concern after swapping an Engine Control Module or other modules from one vehicle to another. The Global Architecture electrical system associated with these vehicles does not allow controller swaps between vehicles.
PIC6306A2019-06-03. Service bulletin. ENGINE AND ENGINE COOLING. The Preliminary Information communicates that a vehicle may come into the dealer with a SES light on and code P0446 set in Engine Control Module. Dealer is instructed to inspect the EVAP air inlet pipe to the EVAP canister for dust intrusion. If dust intrusion is found dealer is instructed to clean the air inlet pipe and filters and replace the EVAP canister.
17NA2922019-05-13. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:WIRING. This technical bulletin provides a procedure to inspect the wires and/or replace the Valve Rocker Arm Oil Control Valves if the DTCs listed are set.
16NA1292019-05-13. Service bulletin. ENGINE. This informational bulletin advises the technician not to change the crankshaft balancer if it has the illusion of a wobble or vibration appearance.
070601016D2019-05-13. Service bulletin. ENGINE. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
000601012H2019-05-13. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT. This informational bulletin advises the possible issues that may occur using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
19NA0442019-04-22. Service bulletin. ENGINE. This informational bulletin provides information on a normal engine operating condition for faster emission warm up time.
PIC63062019-04-08. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL. The Preliminary Information communicates that avehicle may come into the dealer with a SES light on and code P0446 set in Engine Control Module. Dealer is instructed to inspect the EVAP air inlet pipe to the EVAP canister for dust intrusion. If dust intrusion is found dealer is instructed to clean the air inlet pipe and filters and replace the EVAP canister.
120601003C2019-03-25. Service bulletin. ENGINE. This Bulletin Provides Information for Repairing Engine Front Cover Oil Leak, Sealing Surface Preparation and Applying RTV Sealant.
15NA0872019-03-18. Service bulletin. ENGINE AND ENGINE COOLING. This technical bulletin advises the technician to rest the MIL and diagnose additional DTCs for why the code is setting and disabling the start/stop system.
PIC5650F2019-03-18. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
PIP5545B2019-03-18. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates a possible noise from the water pump causing a DTC and the diagnostics for the repair.
PIP5540B2019-03-18. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
PIP4925B2019-03-18. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL. This preliminary information document communicates a tip on the way to diagnose possible induction or exhaust air leaks using the evaporative emission cart smoke machine and ultrasonic leak detector tools.
PIP5540D2019-03-11. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
PIP56282019-03-11. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
PIP56232019-03-11. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates that a rotational clicking noise heard after engine shut down is a design characteristic and no repairs should be attempted.
PIC63412018-12-17. Service bulletin. POWER TRAIN; ENGINE. This Preliminary information communicates that a customer may bring a vehicle in with a complaint that the engine rpm increased and/or the vehicle downshifted for no reason. The dealer is instructed to test drive the vehicle and check for codes. If no cause of the concern is found and it cannot be duplicated the dealer technician is instructed to review operation of the tap shift operation in the owner's manual. The technician is then instructed to drive the vehicle with the customer and downshift the vehicle using temporary tap shift mode to demonstrate this feature to the customer and see if this is what the customer is experiencing. If the customer states that this is what they are experiencing the dealer is advised to educate the customer on the tap shift operation.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.