WenmarOpen by Wenmar Pro

Service bulletins for the 2019 BMW X2

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

79 on file from NHTSA, as of 2026-10-19.

By type

By component

Bulletins, newest first
B6406212021-12-13. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL. Different air temperatures are felt from left to right out of the front fresh air grilles (air vents).
B6406212021-09-07. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Different air temperatures are felt from left to right out of the front fresh air grilles (air vent). The following fault code is saved in the IHKA (integrated automatic heating/air conditioning system) control unit: 801189 - Engine mixed air right: Initialization fault.
B6508212021-08-09. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; STRUCTURE:INTERIOR PANELS:DASHBOARD; EQUIPMENT. Customer states the Central Information Display is flickering and the picture is shifting.
B5113182021-03-15. Service bulletin. VISIBILITY. LIN BUS FAULTS WITH EXTERIOR REARVIEW MIRROR GLASS DAMAGE: Faulty exterior rearview mirror electronics have created a short on the LIN bus, damaging the mirror glass and causing functional errors in power window and exterior mirror operation.
B6404162020-12-21. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER; STRUCTURE. Water Ingress In Footwell Area From A/C Condensate Drain: Water Ingress In Footwell Area From A/C Condensate Drain. Customer complains of musty odor or damp front footwell carpet.
B6123152020-12-21. Service bulletin. VISIBILITY:WINDSHIELD WIPER/WASHER; EQUIPMENT. Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full: Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full.There are no faults stored in the system for the washer fluid level switch.
B6405202020-11-23. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. CONDENSATION FROM AIR CONDITIONING LEAKS INTO PASSENGER FOOTWELL: Condensation from the air conditioning systems evaporator drips, below the instrument panel, into the passenger's footwell. During assembly, the cover of the fresh air intake was not fully seated when the screws were tightened. This cover can then leak condensation out through the existing gap.
B6404202020-11-23. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. BUZZING NOISE IS HEARD WHEN AIR CONDITIONING IS DEACTIVATED: A buzzing noise is heard when the air conditioning (A/C) is deactivated while the vehicle is in park or neutral. Prior to turning off the A/C, the system was functional and cooling properly. A/C compressor, or The power supply to the A/C compressor is too low.
B6405202020-11-16. Service bulletin. STRUCTURE:FRAME AND MEMBERS; EQUIPMENT:APPLIANCE:AIR CONDITIONER. CONDENSATION FROM AIR CONDITIONING LEAKS INTO PASSENGER FOOTWELL: Condensation from the air conditioning systems evaporator drips, below the instrument panel, into the passenger's footwell. During assembly, the cover of the fresh air intake was not fully seated when the screws were tightened. This cover can then leak condensation out through the existing gap.
B6404202020-11-16. Service bulletin. EQUIPMENT; EQUIPMENT:APPLIANCE:AIR CONDITIONER; EQUIPMENT ADAPTIVE/MOBILITY. BUZZING NOISE IS HEARD WHEN AIR CONDITIONING IS DEACTIVATED: A buzzing noise is heard when the air conditioning (A/C) is deactivated while the vehicle is in park or neutral. Prior to turning off the A/C, the system was functional and cooling properly. A/C compressor, or The power supply to the A/C compressor is too low.
B3408202020-10-19. Service bulletin. ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM. SERVICE ACTION - PROGRAM THE BODY DOMAIN CONTROL (BDC) UNIT: Aftermarket scan tools cannot read fault codes in the Dynamic Stability Control (DSC) unit via the On-Board Diagnostic (OBD) socket. The DSC data is not processed correctly in the BDC and therefore cannot transmit any diagnostic requests via the OBD using aftermarket scan tools.
B3408202020-09-14. Service bulletin. ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC). DELIVERY STOP - OBD ACCESS IN DSC CONTROL UNIT: Aftermarket scan tools cannot read fault codes in the Dynamic Stability Control (DSC) unit via the On Board Diagnostic (OBD) socket. The DSC data is not processed correctly in the BDC and therefore cannot transmit any diagnostic requests via the OBD using aftermarket scan tools.
B6507092020-08-31. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. NAVIGATION SYSTEM - REPORTING MISSING OR INCORRECT ROADMAP DATA: Do not replace parts and do not program the vehicle. Roads can change by up to 15% every year. To ensure the best navigation experience, we do everything in our power to create the best maps. Your reports help us to detect changes in your area and keep future versions of our maps as accurate as possible. Therefore, a road map error or missing data must be reported directly to the map supplier.
B3405172020-08-31. Service bulletin. SERVICE BRAKES, HYDRAULIC; WHEELS. TICKING NOISE WHILE CORNERING WITHOUT THE BRAKES APPLIED: Ticking noise coming from front wheel while cornering without brakes applied, noticeable at low speeds. The vehicle must be moving.
B6105202020-06-15. Service bulletin. ELECTRICAL SYSTEM. CCM DISPLAYED "INCREASED BATTERY DRAIN" CAUSED BY CONTROLLER: A yellow CCM (Check Control Message) ID 415 is displayed- "Increased battery drain! // Battery. Electrostatic discharge at standstill / start engine. Energy management" The results of the Energy Diagnosis test plan identifies the Controller as the root cause of the CCM. The Controller delays the vehicle going to sleep by up to 6 minutes. In some cases this will cause the CCM 415 to be displayed when starting the vehicle. Replacing the Controller in this case will not correct this situation.
B5113182020-06-15. Service bulletin. VISIBILITY; ELECTRICAL SYSTEM; POWER TRAIN. LIN BUS FAULTS WITH EXTERIOR REARVIEW MIRROR GLASS DAMAGE: Any or all of these conditions may be present: A. The exterior rearview mirror glass is discolored or cracked B. The power windows and folding mirrors may not operate C. One or more of the following LIN bus faults are stored in the BDC (Body Domain Controller): D90C03 LIN bus master B: short circuit - BDC D90C04 LIN bus master B: No communication - BDC D90C05 LIN bus master B: Communication failed - BDC D90D07 Operating facility switch block (LIN): Missing LIN slave D90D0A exterior rearview mirror left (LIN bus): Absent LIN slave - BDC D90D0D exterior rearview mirror right (LIN bus): Absent LIN slave - BDC 804246 exterior rearview mirror left (LIN bus): Heating or electrochrome: faulty - BDC 804256 exterior rearview mirror right (LIN bus): Heating or electrochrome: faulty - BDC 804265 exterior mirror left or right: Excess temperature - BDC 804260 exterior mirror left or right: Overvoltage - BDC 804261 exterior mirror left or right: Undervoltage - BDC Faulty exterior rearview mirror electronics have created a short on the LIN bus damaging the mirror glass and causing functional errors in power window and exterior mirror operation.
B1304202020-06-15. Service bulletin. ENGINE AND ENGINE COOLING. TANK VENTILATION AND MIXTURE CONTROL FAULTS STORED IN THE DME: The Engine Malfunction Warning is illuminated and one or more of the following faults are stored in the DME. All models: FC 191C02 - Fuel tank ventilation system 2nd discharge point: malfunction FC 195014 - Differential pressure sensor tank vent valve signal: fixed FC 118001 - Mixture control: mixture too lean FC 118401 - Mixture control: mixture too lean large deviation I01 only: FC 124103 - Mixture control: mixture too lean FC 124101 - Mixture control: Mixture lean large deviation CAUSE Internal mechanical defect in the tank ventilation valve. The defect can also result in a very loud clicking noise when the valve is cycling.
B1221172020-06-15. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. ROUGH RUNNING IMMEDIATELY AFTER A COLD START: Immediately after a cold start the engine may run roughly during the catalyst heating period. Depending on the severity of this situation the malfunction indicator lamp (MIL) can be illuminated and the following fault code may be set: Fault code Control module Fault code text 151001 DME Ignition angle adjustment while idle speed cold start: ignition angle early In some circumstances if the vehicle is switched into a drive gear (R or D) when the RPM are low the engine may switch off. Should this occur the engine may be restarted normally. Software error in the DME.
B8402142020-04-27. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY. CONNECTEDDRIVE/BMW ASSIST SYSTEM DIAGNOSIS INFORMATION: This Service Information Bulletin (Revision 7) replaces SI B84 02 14 dated May 2019. ConnectedDrive/BMW Assist features are partially or completely inoperative. This Service Information Bulletin: Is being published because vehicles are down for an extended period of time when researching system failures with ConnectedDrive or BMW Assist. Will assist you both in identifying the issue and providing technical support. CAUSE Not enough information is available for BMW NA engineers to assist the technician in diagnosing the root cause.
B6522142020-04-20. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). AUTOMATED ACTIVATION OF NAVIGATION SYSTEM DURING PDI/QC1: This Service Information Bulletin (Revision 2) replaces SI B65 22 14 dated October 2015. The INITIAL NAV enabling code no longer needs to be pre-ordered through the Parts department! When the vehicle is connected to the diagnostic system ISTA to perform PDI/QC1 the step to activate the navigation system (part of Delete Transport Mode) will automatically request the INITIAL NAV enabling code (VIN-specific) without pre-ordering the enabling code. This enabling code will be automatically delivered through ISTA and it then activates the navigation system.
B6109202020-04-20. Service bulletin. ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC); ELECTRICAL SYSTEM; STEERING; SUSPENSION. CHECK CONTROL MESSAGES FOR BRAKE SUSPENSION AND AIR BAG SYSTEM MALFUNCTION: Multiple check control messages (CCM) can display for brake suspension and air bag system malfunction. The customer may also complain about any of the following: Engine can no longer be switched off Drive position (D) cannot be engaged on the gear selector switch (GWS) Reduction of steering assist After an engine emergency shut-off (either a prolonged long press; or 3 consecutive short presses of the Start/Stop button) and the vehicle going to sleep (identifiable by the lighting of the "Start/Stop button") everything resumes normal functionality and the CCM messages no longer appear.
B6105202020-04-20. Service bulletin. ENGINE. CCM DISPLAYED "INCREASED BATTERY DRAIN" CAUSED BY CONTROLLER: This Service Information Bulletin (Revision 1) replaces SI B61 05 20 dated February 2020. Electrostatic discharge at standstill / start engine. Energy management" The results of the Energy Diagnosis test plan identifies the Controller as the root cause of the CCM. The Controller delays the vehicle going to sleep by up to 6 minutes. In some cases this will cause the CCM 415 to be displayed when starting the vehicle. Replacing the Controller in this case will not correct this situation.
B5130162020-04-20. Service bulletin. AIR BAGS; PARKING BRAKE. TAILGATE UNINTENTIONALLY OPENS: This Service Information Bulletin (Revision 4) replaces SI B51 30 16 dated March 2018. Trunk/tailgate may open when vehicle is locked Trunk/tailgate may open while the vehicle is in motion usually after stopping such as a traffic light etc. Vehicle key trunk/tailgate button may be accidentally pressed thus opening the tailgate.
B6404162020-03-16. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS. Water Ingress In Footwell Area From A/C Condensate Drain: This Service Information Bulletin (Revision 1) replaces SI B64 04 16 dated March 2016. The condensate drain hose is blocked by the heat shield The condensate drain hose is not attached properly to the housing The condensate drain hose was damaged during installation
B6105202020-03-16. Service bulletin. ELECTRICAL SYSTEM. CCM DISPLAYED "INCREASED BATTERY DRAIN" CAUSED BY CONTROLLER. A yellow CCM (Check Control Message) ID 415 is displayed- "Increased battery drain! // Battery. Electrostatic discharge at standstill / start engine. Energy management" The results of the Energy Diagnosis test plan identifies the Controller as the root cause of the CCM. The Controller delays the vehicle going to sleep by up to 6 minutes. In some cases this will cause the CCM 415 to be displayed when starting the vehicle. Replacing the Controller in this case will not correct this situation.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.