WenmarOpen by Wenmar Pro

Service bulletins for the 2019 BMW X1

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

68 on file from NHTSA, as of 2026-10-19.

By type

By component

By topic

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
B1204202020-03-16. Service bulletin. EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM. MIL LIGHT ILLUMINATED AT LOW AMBIENT TEMPERATURES. After engine start the malfunction indicator lamp (MIL) and Check Control message (ID 29) "Engine fault! Power loss" are displayed in the instrument cluster. In addition The following fault codes are stored in the Digital Motor Electronics (DME) Engine runs in failsafe mode Engine cannot exceed 800 - 1200 RPMs.
B3202142020-02-18. Service bulletin. ELECTRICAL SYSTEM; STEERING. Power-assisted Steering Intermittently Not Available at Engine Start-up: This Service Information Bulletin (Revision 1) replaces SI B32 02 14 dated November 2016. The power-assisted steering is unavailable at start up/drive readiness. No communication with the Electric Power Steering (EPS). Possible fault codes: Fault code Text D356A5 message fault (display of the check control driving dynamics 02 D: Disp_CC_DRDY_02) Timeout D359BF message fault (actual steering torque of the driver actuator ID: AVL_STMOM_DV_ACT) Timeout D356B6 message fault (display of the check control driving dynamics 02 ID: DISP_CC_DRDY_02) - Alive 480AB8 internal status management of the complete monitoring range CDA451 FlexRay message (actual steering torque of the driver actuator 49.0.2): missing CDA452 FlexRay message (actual force of the rack 49.0.2): missing D35B26 message fault (actual position of the EPS ID: AVL_PO_EPS) - Timeout D355C4 message fault (status of the electrical steering front axle ID: ST_EST) - Timeout 48083B Peripheral/functional error on the engine control unit interface Actual steering angle of the front axle; signal temporarily invalid D35COC message fault (actual force of the rack ID: AVL_FORC_GRD) - Timeout. Electric Power Steering (EPS).
B1302182020-02-18. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. DME FAULT CODE 1B8004 ENVIRONMENTAL AIR CATALYST(EAC) SENSOR: This Service Information Bulletin (Revision 1) replaces SI B13 02 18 dated April 2018. The Malfunction Indicator Lamp (MIL) light is on and the following fault code is stored in the DME: 1B8004 - EAC Sensor: Temperature - Engine coolant temperature radiator outlet comparison to each other implausible DME software calibration error for EAC sensor diagnostics.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.