# Service bulletins for the 2025 BMW S 1000 RR

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

6 bulletins from NHTSA, as of 2026-10-19.

- [MCAS1726](/bulletins/11029028.md), 2026-02-25, Other: ELECTRICAL SYSTEM; EXTERIOR LIGHTING. Return Combination Switch
- [MCSTOP610032](/bulletins/11028992.md), 2026-02-24, Service campaign: EXTERIOR LIGHTING. After a quality inspection it was found that due to improper machining, the right\-side chain tensioner screw plug doesn’t meet the specifications over the service life of the motorcycle. As a result, over increased mileage accrued noise and engine damage may occur.
- [MC360125](/bulletins/11024216.md), 2025-10-10, Service bulletin: WHEELS. When turning the wheel slowly, you might hear rattling noises from inside. Sometimes during manufacturing ,the core doesn't fully detach from the wheel. These core pieces can break off and rattle inside the wheel.
- [MC330325](/bulletins/11022847.md), 2025-09-05, Service bulletin: SUSPENSION. Traces of wear seem to be found on the needle bearing bush of the rear suspension strut. The ZnNi \(zinc\-nickel\) corrosion protection coating can be worn in the area of the race for the needles of thebearing and does not constitute bearing bush wear.
- [MC330225](/bulletins/11022846.md), 2025-09-05, Service bulletin: SUSPENSION. Customer complains when the bike parked and without the engine running; while compressing and lettingthe rear suspension rebound, there is a loud audible cracking or groaning noise. This is either due to low grease levels on the bearing positions or bearing position damage.
- [MC110322](/bulletins/11017291.md), 2025-04-29, Service campaign: POWER TRAIN. During the production of the intake camshaft there was a change in the coolant used to prevent localized overheating of parts of the camshaft. Because of this, certain parts of the camshaft may have a changed surface hardness that can result in increased wear of the rocker arms and camshaft over time.

JSON: [/v1/vehicles/2025_bmw_s-1000-rr/bulletins](/v1/vehicles/2025_bmw_s-1000-rr/bulletins)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%202025%20BMW%20S%201000%20RR&page=https%3A%2F%2Fopen.wenmarpro.com%2Fmakes%2Fbmw%2Fs-1000-rr%2F2025%2Fbulletins&vehicle=2025%20BMW%20S%201000%20RR)