Service bulletins for the 2021 Bentley Flying Spur
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
716 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
| 2058837/2 | 2020-11-04. Service bulletin. STEERING; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. DTC's C135DF0 and/or C12F000 evident within the Steering rack and power steering control unit (J500). Customer statement / workshop findings: DTC's C135DF0 and/or C12F000 evident within the Steering rack and power steering control unit (J500) Diagnostic address 44 Technical background: Refer to the Measure section of this TPI |
|---|---|
| 2060446/4 | 2020-11-04. Service bulletin. STEERING; WHEELS. Clicking noise from the front wheels when conducting a static lock to lock steering manoeuvre. Customer statement / workshop findings: Clicking noise from the front wheels whilst performing a static lock to lock steering manoeuvre Technical background: Verify that the customer complaint matches the video within the Bentley Hub Reference TPI Transaction number 2060446 |
| 2051511/5 | 2020-11-03. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. Mood lighting. Customer statement / workshop findings: Mood lighting strip fixed on one colour regardless of which colour scheme is selected or not illuminated at all. Technical background: Refer to the Measure section of this TPI |
| 2051519/7 | 2020-11-03. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER; ELECTRICAL SYSTEM. HVAC operation issues/HVAC Motor defect DTCs logged. Customer statement/workshop findings: HVAC operation issue and HVAC motor defect (DTCs) evident within address 08 Climatronic control unit, the DTCs can be static or sporadic, for example: B108D09: Right temperature flap positioning motor - Component defect Technical background: The HVAC motor/s can become jammed causing HVAC operation issues. |
| 2054599/6 | 2020-11-03. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Headlamp operation issues. Customer statement / workshop findings: Headlamp operation issues Technical background: DTCs evident within the left light control unit (Diagnostic address D6) and/or the right light control unit (Diagnostic address D7) There are numerous static and intermittent DTCs which may be evident within the previously mentioned control units, ensure all steps within the Measure section are strictly adhered to |
| 2053351/6 | 2020-11-03. Service bulletin. ENGINE AND ENGINE COOLING. Buzzing noise from engine area. Customer statement / workshop findings Workshop findings: Buzzing noise heard at idle from the sump area when the vehicle is elevated on a workshop ramp. The noise cannot be heard from inside the cabin or outside of the vehicle in normal circumstances. Technical background: A buzzing noise can be generated by the oil pump when the engine is running at idle. |
| 2058423/4 | 2020-11-03. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. New Continental GT/GTC, New Flying Spur and Bentayga Speed - Low Oil Pressure Warning During Early Vehicle Life Customer statement/workshop findings: Warning on the Driver Instrument Panel (DIP) - Oil pressure too low DTCs relating to oil pressure may also be stored within the Master ECU. Diagnostic Trouble Codes (DTC) P052400: Engine Oil Pressure Too Low and/or P15AA00: Engine oil pressure -Lower limit not reached stored in the Master Engine Control Unit (ECU) Technical background: CAUTION: DO NOT CONTINUE WITH THIS DOCUMENT IF THE ENGINE EXHIBITS ANY ABNORMAL MECHANICAL NOISE OR HAS AN ENGINE LUBRICATING OIL LEAK SEEK FURTHER ADVICE THROUGH A NEW OR EXISTING DISS QUERY |
| 2057978/4 | 2020-11-03. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT. Engine Lubricating Oil - Replenishment. Customer statement / workshop findings: Engine lubricating oil lamp illuminated on driver instrument panel. Engine lubricating oil requires topping up between services. Technical background: In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically, engines with specified running-in periods consume more oil during the running-in period, and the oil consumption will stabilize after the running-in period. Refer to the Owners Manual for specific running-in procedures. Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, ambient temperature and road conditions. Additional factors are the amount of oil dilution from water condensation or fuel residue, and the oxidation level of the oil. Certain driving conditions may negatively influence the rate of oil consumption. This can occur while the vehicle is operated in city driving conditions, for example: stop and go traffic with extended idle periods. |
| 2060823/1 | 2020-10-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT:APPLIANCE:TV/RADIO/SPEAKERS. Radio: Reception complaints. Customer statement / workshop findings: All complaints which are related to radio reception issues Technical background: Complaints about the radio reception can have many causes. The radio reception strength/quality at the vehicle location can be an important issue. To process such complaints as effectively as possible it is important to precisely record the circumstances when a complaint occurs. The attached check list is available for this purpose. Please ensure the instructions within the Measure section are strictly adhered to |
| 2052785/5 | 2020-09-05. Service bulletin. SERVICE BRAKES, HYDRAULIC. Brake noise identification. Customer statement: Noise complaint from the braking system. Workshop findings: The noise can be reproduced and clearly assigned to the braking system. Technical Background: Brake noises can be attributed to many causes. Eight of the most common causes are: 1. Brake discs or pads are close to their wear limit. 2. New brake pads and/or discs have not been properly bedded in after installation. 3. Aftermarket pads or discs are installed. 4. There is debris such as small stones, grit, road salt or sand between the brake disc and pad. 5. Discs are covered in rust. Rust can form when the vehicle has been stationary for long periods of time (Figure 1). |
| 2053177/11 | 2020-08-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Customer statement / workshop findings Customer will not be aware of any fault codes. Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle. All Vehicle Variants - Spurious DTC List Technical background The attached document contains all of the current known Spurious DTCs for all vehicle variants. Should a particular TPI be listed as Archived within the attached document the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions with the attached document regarding the DTC description and actions (if any) which should be conducted |
| 2028808/4 | 2020-08-05. Service bulletin. ENGINE AND ENGINE COOLING. Engine oil. Specific oil type and oil consumption reference. Customer statement / workshop findings: Engine oil level requires to:p up between services. Technical background The use of the correct oil for each engine type is critical for its continued performance, reliability and ultimately warranty. The workshop manual should always be the first point of reference, ensuring the correct lubricant is used for each specific model year and engine type Should oil be required the parts catalogue must be referred to ensuring the correct VIN is always used when ordering |
| 2057841/2 | 2020-08-05. Service bulletin. STRUCTURE. Windscreen replacement criteria whilst under manufacturers warranty. Customer statement / workshop findings: Windscreen cracked/damaged Technical background: Please refer to the instructions within the Measure section of this TPI in the event that a windscreen is cracked/damaged |
| 2056582/3 | 2020-08-05. Service bulletin. STRUCTURE. Interior trim - Creak and rattle - Noise identification. Customer statement / workshop findings: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work |
| 2058354/2 | 2020-06-04. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE. New Flying Spur - Flying "B" Mascot Condition: This Technical Product Information (TPI) Document is designed to give repair guidance and standardised fault reporting for Flying B functionality, poor finish and damage concerns. |
| 2058516/1 | 2020-03-04. Service bulletin. STRUCTURE; FUEL SYSTEM, GASOLINE. Ticking noise from the rear cabin area Customer statement / workshop findings: Ticking noise can be heard from inside the rear of the cabin when sitting in the rear seats Technical background: The noise can be heard when the engine is at operating temperature, after a drive cycle or an extended idle period, the noise is most evident with the armrest lowered with all electrical consumers switched off. The ticking noise occurs when the purge system is in operation, the vibrations emitted from the purge valve are then amplified through the fuel pipes to the rear of the vehicle. This is normal operation and no further investigation work is required as the vehicle is operating to specification. Production change |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.