WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Bentley Continental

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

708 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
2060446/52021-10-06. Service bulletin. EQUIPMENT; WHEELS; SUSPENSION; STEERING; SERVICE BRAKES, HYDRAULIC. Clicking noise from the front wheels when conducting a static lock to lock steering manoeuvre Customer statement / workshop findings: Clicking noise from the front wheels whilst performing a static lock to lock steering manoeuvre Technical background: Verify that the customer complaint matches the video within the Bentley Hub Reference TPI Transaction number 2060446/- The operative MUST ensure that all similar symptom TPIs are checked to ensure the fault is exactly as described
2060432/32021-10-06. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. New Continental GT / GTC and New Flying Spur - Exhaust Flap - Diagnostic Trouble Code Customer statement / workshop findings: Warning lamp illuminated on Driver Instrument Panel (DIP) “Drive system fault. Contact your Bentley dealer displayed on DIP. One or more of the following Diagnostic Trouble Codes (DTCs) stored within Engine Control Modules (ECMs) 1 or 2 (Depending on model type) P04A000: Exhaust Pressure Control Valve P04A000 / P047500: Exhaust Pressure Control Valve A P14AB00: Exhaust door control unit mechanical malfunction P049F00: Exhaust Pressure Control Valve "B
2062257/22021-10-06. Service bulletin. LATCHES/LOCKS/LINKAGES; ELECTRICAL SYSTEM; STRUCTURE. Keyless door entry does not work - Front Outside Door Handle - Touch Sensor DTC present within address 0046 Customer statement: Keyless entry does not work Workshop findings: Front Outside Door Handle Touch Sensor open circuit DTCs present within address 0046
2061972/22021-10-06. Service bulletin. EQUIPMENT; STRUCTURE. Styling specification - New Continental GT and GTC - Mulliner specification Customer statement / workshop findings: Customer request to install the fitment of the styling specification to 21 Model year Mulliner variants of the New Continental GT and New Continental GTC Technical background: The fitment of the styling specification to the Mulliner variant of the New Continental GT and New Continental GTC is not certified for this vehicle type.
2062626/22021-10-06. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. DTCs stored for all cylinders on Bank 1 or all cylinders on Bank 2 - W12 TSI engine derivative. Customer statement / workshop findings: -DTCs stored for all cylinders on Bank 1 or all cylinders on Bank 2 including multiple cylinder misfires DTC. -Misfires logged in one or both engine control units. -Engine warning light on. -Erratic engine operation.
2058411/42021-10-06. Service bulletin. SEAT BELTS. Seat belt buckle stop button - Missing Customer statement / workshop findings: Seat belt buckle stop button missing Measure: Replace the affected seatbelt assembly
2059068/42021-10-06. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY; POWER TRAIN. Transmission communication DTC's (Numerous) - W12 engine Customer statement: Drive system fault active on DIP Workshop findings: Various and/or numerous Transmission control module (TCM) communication DTCs logged Technical background: Loose pins within the transmission link harness to the Mechatronic unit for dual clutch gearbox -J743- connections can lead to various transmission communication and hardware based DTCs
2061369/32021-10-06. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Engine overheating -Warning on theDIP-V8Kovomo Customer statement / workshop findings: -Customer reports an engine overheat warning on the DIP. -Engine overheats. -Unusual cooling fan operation at high temperatures. -There are no signs of coolant leaks both internally or externally. Technical background To heat the engine as quickly as possible during cold starting, delivery of coolant from the coolant pump is interrupted in the warm-up phase by the solenoid valve for the mechanical coolant pump. The solenoid is designed to cut off the vacuum supply to the coolant pump when the engine reaches the maximum temperature, the vacuum cut off allows the engine to start circulating coolant by retracting a sleeve which is situated around the coolant pump impeller. When the solenoid is at fault (sticking open) the vacuum supply is constant, this allows the sleeve to stay in position around the impellor which leads to the symptoms described within the Customer statement/Workshop findings section of this TPI
2061536/32021-10-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Customer statement / workshop findings: Upon start-up of the Infotainment system, the home screen appears stuck in the Initializing procedure when this scenario is evident a spinning wheel is visible. Technical background: The issue occurs when the Infotainment system is shut down with the Home and menu screen displayed. The Infotainment will start up on this screen the next time the vehicle is started. A technical DISS query should be raised by the retailer to highlight the issue described is evident.
2058837/32021-10-06. Service bulletin. ELECTRICAL SYSTEM; STEERING. DTC's C135DF0 and/or C12F000 evident within the Steering rack and power steering control unit (J500) Customer statement / workshop findings: DTC's C135DF0 and/or C12F000 evident within the Steering rack and power steering control unit (J500) Diagnostic address 44 Referring to Figure 1 Check and confirm the Software version number is 2110 - Should the Software version number be at 2110 the operative should conduct Section 1 of this TPI - Should the Software version number be one of the versions shown below, the operative should conduct Section 2 of this TPI
2063953/22021-10-06. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; FORWARD COLLISION AVOIDANCE. ACC Unavailable - Warning within the DIP - Numerous DTC's within address 003 Customer statement: ACC Unavailable - Warning within the DIP Workshop findings: One or a combination of the following DTCs and symptom codes are evident within address 003 - P191F00 – 4538626 - Pressure sensor for brake booster Electrical malfunction (Front Right Corner Pressure Sensor Fault) - C054100 – 4538624 - Brake Pressure Sensor "B" Range/Performance (Rear left Pressure Sensor Fault) - C054200 – 4538880 - Brake Pressure Sensor "B" Circuit Low (Rear left Pressure Sensor Fault)
2063992/22021-10-06. Service bulletin. EQUIPMENT; STRUCTURE; EQUIPMENT ADAPTIVE/MOBILITY. New Continental GTC - Wind noise between 50 - 70 mph - Above the driver/front passengers head Customer statement / workshop findings: When the convertible roof is closed, wind noise can be heard above drivers/front passengers head, when driving at approximately 50-70 mph Technical background: The issue in some cases can be related to the roof frame seal
2063954/32021-10-06. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Engine warning light illuminated within the DIP during acceleration - DTC P029900 evident - W12 TSI only Customer statement: Engine warning light and max engine speed 4000 rpm warning evident within the DIP during acceleration - Warning on DIP first appears when accelerating (During boost) Workshop findings: DTC P029900 evident within the engine control unit/s In the event the afore mentioned symptoms are evident the operative should refer to the onward instructions
2063410/22021-10-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Infotainment Main unit (5F / J794) fault finding/diagnosis procedure Customer statement / workshop findings: Issue suspected with the Infotainment Main unit (5F / J794) - For example: -MMI screen image flickers or goes blank - No response to selection - Audio cuts-out Technical background: Refer to the Measure section regarding any Infotainment Main unit (5F / J794) fault finding/diagnosis
2063354/22021-10-06. Service bulletin. ENGINE AND ENGINE COOLING. V8 Kovomo - Whining noise - Front of the engine at idle speed Customer statement: Erratic whining noises from the front of the engine at idle speed. Workshop findings: The irregular knocking noises can be assigned to the front of the engine. There are no further complaints (such as poor engine or engine cooling system performance, event entries, etc.)
2061537/32021-10-06. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. Infotainment home screen - Loading messages visible on start up in multiple tiles. Customer statement / workshop findings: Upon start-up of the Home screen, loading messages can be seen in some or all of the tiles. Technical background A delay when loading tiles is normal, this is due to the amount of external data that is required to load each individual tile, including multiple pages of external data that can be associated with each individual tile. Some tiles will naturally take longer to load than others. For example, APPS, NAVIGATION and MEDIA are likely to have a greater delay in loading than other tiles this is due to the amount of external data required to display the relevant information. TIP: If required, the delay can be reduced by only selecting tiles that do not communicate with external data sources, for example CAR or CLIMATE functions. A technical DISS query should be raised by the retailer to highlight the issue described is evident.
2061566/32021-10-06. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. Customer statement / workshop findings: VERY IMPORTANT: This TPI is only applicable to vehicles which have the following issues found during the Pre Delivery Inspection (PDI). Unable to complete set-up of Connected Services at PDI and/or the SOS LED in roof console is either lit red or flashing red and/or the test call is unable to complete.
2057841/32021-10-06. Service bulletin. VISIBILITY; STRUCTURE. Windscreen replacement criteria whilst under manufacturers warranty Customer statement / workshop findings: Windscreen cracked/damaged Technical background: Please refer to the instructions within the Measure section of this TPI in the event that a windscreen is cracked/damaged NOTE: The instructions MUST be followed to help the retailer clarify if the windscreen should be replaced under manufacturers warranty (Stress crack) or Customer pay/insurance (external influence damage)
2057730/32021-10-06. Service bulletin. LATCHES/LOCKS/LINKAGES; EQUIPMENT; STRUCTURE; ELECTRICAL SYSTEM. Hands free boot not operating - Open and Close Customer statement / workshop findings: Hands free boot not operating, the function to open and close the boot does not work Technical background: Coding for the hands free boot function has not been enabled.
2056276/32021-10-06. Service bulletin. COMMUNICATION: VEHICLE TO INFRASTRUCTURE; ELECTRICAL SYSTEM; EQUIPMENT. Bang & Olufsen - BeoSonic sound settings reset after ignition cycle Customer statement / workshop findings: The BeoSonic sound settings are lost when the ignition is turned off. Technical background: Incorrect software in the Sound system control module.
2056105/32021-10-06. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; EQUIPMENT; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Emergency call function test at PDI The instruction to test the Emergency call function at PDI will be integrated within the PDI procedure All Emergency call function operating instructions can be found within the Owners handbook (Making an Emergency call)
2055846/52021-10-06. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. Infotainment screen turns red sporadically A technical DISS query should be raised by the retailer to highlight the issue described is evident
2061757/22021-10-06. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. Customer statement: Night vision warning lamp is evident with the Drivers Information Panel (DIP). Workshop findings: DTC - B2000F2: Faulty control module (Symptom code 4102) evident within address 0084 Night vision control module. Technical background: IMPORTANT: In the event that the issue is evident and the vehicle is post the VINs shown below, a DISS query must be raised ensuring the following is attached to the query. -Detailed description in which the issue occurred, for example -Driving on a quiet road with no traffic, conditions were wet, the road had no street lighting. -Clear photographs showing the condition of the night vision camera and night vision camera lens. -Current and up to date ODIS log. However, should the vehicle be prior to the VIN cut off, the operative MUST carry out the instructions within the Measure section of this TPI. New Flying Spur New Continental GT and New Continental GTC (all vehicles from SCBCD13S1KC071068 are to specification). Bentayga (all vehicles from SJAAL14V0KC025622 are to specification).
2055772/42021-10-06. Service bulletin. ELECTRICAL SYSTEM. Battery conditioner inoperative Corrosion on the contact surfaces of the charger socket and charger lead. If the charging socket or charger lead are wet when the charger is connected this can cause corrosion on the contacts. Check for corrosion on the contact surfaces of both the charger socket and charger lead.
2055580/62021-10-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Rotating Display - Fault Diagnosis Customer statement / workshop findings: Various rotating display operational complaints or noises. Follow the measure section of this TPI that relates to your customer complaint.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.