Service bulletins for the 2022 Bentley Continental
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
708 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
| 2033864/6 | 2021-10-04. Service bulletin. WHEELS. Customer statement / workshop findings: Unable to remove Accessory valve caps, Figure 1 shows an example of the caps. Technical background: We have observed instances where the caps have been difficult to remove once fitted, the issue is caused by corrosion. The valve stem itself is made from aluminium and the accessory valve caps are chromium plated brass, it is possible under certain environmental conditions, particularly winter road salt, for corrosion to take place between these dissimilar metals. Measure: The solution is to apply a thin smear of silicon-based grease, such as Dow Corning high vacuum grease, to the external threads of the valve stem prior to fitting the accessory valve cap. Grease should be applied any time the cap is removed and grease is not evident |
|---|---|
| 2028808/5 | 2021-10-04. Service bulletin. ENGINE AND ENGINE COOLING. Service info: Engine oil Specific oil type and oil consumption reference. Customer statement / workshop findings: Engine oil level requires top up between services Technical background: The use of the correct oil for each engine type is critical for its continued performance, reliability and ultimately warranty. The workshop manual should always be the first point of reference, ensuring the correct lubricant is used for each specific model year and engine type Should oil be required the parts catalogue must be referred to ensuring the correct VIN is always used when ordering |
| 2056407/3 | 2021-10-04. Service bulletin. STEERING; SUSPENSION. Running gear - Noise identification. Customer statement: Noise complaint from the suspension and/or steering Workshop findings: The noise can be reproduced and clearly assigned to the suspension system from either of the axles And/or The noise can be reproduced and clearly assigned to the steering system |
| 2061857/3 | 2021-10-04. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS:SWITCH; ELECTRICAL SYSTEM. Headlamp switch - Inoperative/Not illuminated - DTC U110B00 within 09-Central Electrics (BCM1) Customer statement: Headlamp switch - Inoperative/Not illuminated Workshop findings: DTC U110B00within 09-CentralElectrics (BCM1), Figure in attachment -Yellow warning light / message within the DIP(Adaptive Lighting Fault) NOTE: Some lighting functionalities can in some cases be lost for example: -Rear fog light activation -All weather lighting mode activation -Head lamps default to dipped beam however high beam will still activate manually NOTE: Recycling the ignition will not resolve the problem Technical background: The issue will not occur when the ignition is on and/or the vehicle is being driven. It occurs as the headlamp switch goes into a “sleep” state after ignition is Switched OFF, the issue is then evident to the driver when the ignition is next switched ON. |
| 2060646/3 | 2021-10-02. Service bulletin. EQUIPMENT:ELECTRICAL; STRUCTURE:BODY:TRUNK LID. New Continental GTC - Boot open/close function inoperative Customer statement / workshop findings: Boot operational issues for example: The boot does not open or close as expected Technical background VERY IMPORTANT: Please ensure all VIN applicable TPIs and VIN applicable Service Campaigns are checked and conducted prior to conducting the instructions within this TPI NOTE: The operative MUST submit the following information to a new DISS query or an existing query relating to boot operational issues -Completed check list -Images of the vehicle condition - In particular the boot area (Ensure license plate and VIN details are not visible) -Video of the failure NOTE: Please capture the rear of the vehicle for at least one open/close operation (when possible) before zooming or moving in closer to the issue, the video MUST be recorded in a quiet environment -Battery health - Print out of the results NOTE: Please ensure any other findings or issues relating to the boot are clearly described within the DISS query Do Not submit or update the DISS query unless ALL information (as previously requested) is attached |
| 2064341/1 | 2021-09-08. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. Transmission control module update during PDI (SC 21/33). Technical background: Software updates are available and should be applied to the following control unit: - Transmission (address 02) Remedy: Carry out the instructions within the Work section to completion |
| 2064358/1 | 2021-09-04. Service bulletin. SUSPENSION; ELECTRICAL SYSTEM. New Continental GT, GTC, New Flying Spur - Air suspension Warning Lamp - Combination of DTCs evident within address 74. Customer statement: Air suspension warning lamp illuminated within the Driver Instrument Panel (DIP) Workshop findings: Combination or multiple DTCs see the examples shown below of current known faults. Technical background: Broken, damaged, dislodged and disconnected air suspension air spring connectors have been evident result in open circuit DTCs |
| 2053348/4 | 2021-09-04. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. W12 Engine management light on - Turbocharger speed sensor DTCs stored. Customer statement / workshop findings - The engine management light is on. Workshop findings: The customer statement can be reproduced. Either of the following DTCs are stored in address 01 Engine Control Module 1 or address 11 Engine Control Module 2 |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.