U110B on the 2021 Bentley Continental
The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.
This code is specific to a manufacturer and is not described here. Its meaning is in the manufacturer's service information.
| 2061857.6 | 2023-01-06. Service bulletin. Headlamp Switch - Inoperative/Not illuminated - DTC U110B00 within 09 - Central Electrics (BCM1) Customer Statement: -Headlamp Switch - Inoperative/Not illuminated -Yellow warning light/message within the DIP (Adaptive Lighting Fault) |
|---|---|
| 2061857.5 | 2022-12-07. Service bulletin. Headlamp switch - Inoperative/Not illuminated - DTC U110B00 within 09-Central Electrics (BCM1) Customer Statement: -Headlamp switch -Inoperative/Not Illuminated Workshop findings: -DTC U110B00 within 09-Central Electrics (BCM1) as shown in figure 1 |
| 2061857/4 | 2022-07-08. Service bulletin. Headlamp switch - Inoperative/Not illuminated - DTC U110B00 within 09-Central Electrics (BCM1). Customer statement / workshop findings: Headlamp switch - Inoperative/Not illuminated Workshop findings - DTC U110B00 within 09-Central Electrics (BCM1) as shown in Figure 1 Figure 1 - Yellow warning light/message within the DIP (Adaptive Lighting Fault) NOTE: Some lighting functionalities can in some cases be lost for example: - Rear fog light activation - All weather lighting mode activation - Headlamps default to dipped beam however high beam will still activate manually NOTE: Recycling the ignition will not resolve the problem Technical background: The issue will not occur when the ignition is on and/or the vehicle is being driven. It occurs as the headlamp switch goes into a “sleep” state after ignition is Switched OFF, the issue is then evident to the driver when the ignition is next switched ON. |
| 2061857/3 | 2021-10-04. Service bulletin. Headlamp switch - Inoperative/Not illuminated - DTC U110B00 within 09-Central Electrics (BCM1) Customer statement: Headlamp switch - Inoperative/Not illuminated Workshop findings: DTC U110B00within 09-CentralElectrics (BCM1), Figure in attachment -Yellow warning light / message within the DIP(Adaptive Lighting Fault) NOTE: Some lighting functionalities can in some cases be lost for example: -Rear fog light activation -All weather lighting mode activation -Head lamps default to dipped beam however high beam will still activate manually NOTE: Recycling the ignition will not resolve the problem Technical background: The issue will not occur when the ignition is on and/or the vehicle is being driven. It occurs as the headlamp switch goes into a “sleep” state after ignition is Switched OFF, the issue is then evident to the driver when the ignition is next switched ON. |
| 2061857/2 | 2021-03-05. Service bulletin. Headlamp switch - Inoperative/Not illuminated - DTC U110B00 within 09-Central Electrics (BCM1). Customer statement: Headlamp switch - Inoperative/Not illuminated Workshop findings DTC U110B00 within 09-Central Electrics (BCM1) as shown in Figure 1. Technical background: The issue will not occur when the ignition is on and/or the vehicle is being driven. It occurs as the headlamp switch goes into a sleep state after ignition is Switched OFF, the issue is then evident to the driver when the ignition is next switched ON. Measure: 1) Referring to Rep.Gr 96 Replace the headlamp switch |
| 2061857/1 | 2021-02-05. Service bulletin. Headlamp switch - Inoperative/Not illuminated - DTC U110B00 within 09-Central Electrics (BCM1). Customer statement: Headlamp switch - Inoperative/Not illuminated Workshop findings - DTC U110B00 within 09-Central Electrics (BCM1) as shown in Figure 1 Figure 1 - Yellow warning light/message within the DIP (Adaptive Lighting Fault) NOTE: Some lighting functionalities can in some cases be lost for example: - Rear fog light activation - All weather lighting mode activation - Headlamps default to dipped beam however high beam will still activate manually NOTE: Recycling the ignition will not resolve the problem Technical background: The issue will not occur when the ignition is on and/or the vehicle is being driven. It occurs as the headlamp switch goes into a “sleep” state after ignition is Switched OFF, the issue is then evident to the driver when the ignition is next switched ON |
6 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.