WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Bentley Continental

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

828 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
2057841/22020-08-05. Service bulletin. STRUCTURE. Windscreen replacement criteria whilst under manufacturers warranty. Customer statement / workshop findings: Windscreen cracked/damaged Technical background: Please refer to the instructions within the Measure section of this TPI in the event that a windscreen is cracked/damaged
2056582/32020-08-05. Service bulletin. STRUCTURE. Interior trim - Creak and rattle - Noise identification. Customer statement / workshop findings: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work
2059333/12020-06-04. Service bulletin. STRUCTURE; LATCHES/LOCKS/LINKAGES; ELECTRICAL SYSTEM. Unable to open, or delay in opening the Driver's or Front passenger door from outside using the door handle (Keyless) Condition: Unable to open, or a delay in opening the driver or passenger front door from the outside of the vehicle when using the door handle (keyless entry) Technical Background: In the event there is a customer complaint regarding the opening of the door from the outside of the vehicle when using the door handle (Keyless entry) please refer to the Measure section of this TPI
2058424/32020-05-06. Service bulletin. STRUCTURE; VISIBILITY; ELECTRICAL SYSTEM. New Continental GT and New Continental GTC - Rear quarter glass not fully closing. Customer statement/workshop findings Referring to Figure 1 - During the window and/or door close operation, the front door drop glass closes and seals (Point A) however the rear quarter glass does not fully close and seal (Point B) leaving a gap between the front and rear glass (Point C).
2058424/22020-05-06. Service bulletin. STRUCTURE:BODY:DOOR; VISIBILITY. New Continental GT and New Continental GTC - Rear quarter glass not fully closing. Customer statement / workshop findings: Referring to Figure 1 - During the window and/or door close operation, the front door drop glass closes and seals (Point A) however the rear quarter glass does not fully close and seal (Point B) leaving a gap between the front and rear glass (Point C). Technical background: Refer to the Measure section of this TPI
2051526/42020-04-03. Service bulletin. STRUCTURE; ELECTRICAL SYSTEM. Rotating screen alignment Customer statement / workshop findings The chrome brightware strip on the veneer face fascia panel of the Bentley Rotating Display (BRD) may appear to be misaligned with the chrome strips on the passenger and drivers side fascia panels. In addition, the gapping and fit between the veneer face fascia panel of the BRD and the passenger and drivers side fascia panels may differ from one side to the other. Technical background The chrome brightware strip is fixed to the veneer face fascia panel with no separate adjustment and as such can appear to be misaligned. The veneer face fascia panel relies on fixed location pins that may be out of tolerance. Rework the veneer face fascia panel to align the chrome brightware strip and/or the gapping between the BRD and the passenger and drivers side fascia panels.
2052634/62020-03-04. Service bulletin. STRUCTURE; VISIBILITY. New Continental GT - Window drop glass concerns Customer statement / workshop findings: Window drop glass concerns. Technical background: Retailer to identify the reported concern, once identified please carry out the instructions within the Measure section Measure: On the receipt of a valid customer complaint relating to any window drop glass concerns, firstly the Software of all 4 door control modules must be updated.
2058194/12020-02-08. Service bulletin. STRUCTURE. Door mirror mounting foot cracked Customer statement / workshop findings Door mirror mounting foot is cracked Technical background In the event the door mirror mounting is cracked, the mounting must be replaced as per the current Repair manual instructions. Please Note: The repair manual instructions will be revised to include the information within the Measure section of this TPI, these instructions MUST be followed until the repair manual is revised.
2058424/12020-02-08. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE. New Continental GT and New Continental GTC - Rear quarter glass not fully closing Customer statement / workshop findings: Referring to Figure 1 - During the window and/or door close operation, the front door drop glass closes and seals (Point A) however the rear quarter glass does not fully close and seal (Point B) leaving a gap between the front and rear glass (Point C) Measure: Retailers should advise customers to pull and hold the front window switch up manually (until the affected window is closed) the window close function should return when the customer exits the vehicle and closes the door Alternatively Close the windows by using the convenience close feature if fitted and active (Refer to Owners handbook) Or should the vehicle not have the convenience close feature Open and then immediately close the front door - Check and confirm the quarter glass window now automatically closes.
2056582/22020-01-09. Service bulletin. STRUCTURE. Condition: Customer statement: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work Technical Background It is the retailers responsibility to check and confirm if there are any TPIs which are applicable to the customers complaint/issue if there is an applicable TPI available, apply it and complete a DISS complaint to include Workshop findings only (No repair query required). For correct diagnosis and repair the attached Flowchart must be followed in conjunction with the Measure section of this TPI
2052431/32019-12-06. Service bulletin. STRUCTURE; EQUIPMENT. Customer statement / workshop findings: Rattle / buzzing noise from Control Unit for Head-Up display - dashboard upper trim panel. Technical background: Several known conditions may cause Rattle / buzzing noise from dashboard upper trim panels. • Relative movement between Control Unit for Head-Up Display and associated Trim Ring – figure 1. • Contact between the dashboard and dashboard upper trim panel. • Head-up Display internal fault
2052394-42019-09-23. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY:DOOR. New Continental GT and New Continental GTC - Driver/Passenger door power latch creak on close
2052092-32019-09-23. Service bulletin. STRUCTURE:BODY:DOOR. New Continental GT - Door 'soft close' functionality
2051748-72019-09-23. Service bulletin. STRUCTURE:BODY. New Continental GT - Wind noises
2051495-22019-09-23. Service bulletin. EXTERIOR LIGHTING:TAIL LIGHTS; STRUCTURE:BODY. New Continental GT - Rear lamps, Boot lid and Rear bumper moulding

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.