Service bulletins for the 2019 Bentley Continental
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
828 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Engine are shown. Show all
| 2060432/3 | 2021-10-06. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. New Continental GT / GTC and New Flying Spur - Exhaust Flap - Diagnostic Trouble Code Customer statement / workshop findings: Warning lamp illuminated on Driver Instrument Panel (DIP) “Drive system fault. Contact your Bentley dealer displayed on DIP. One or more of the following Diagnostic Trouble Codes (DTCs) stored within Engine Control Modules (ECMs) 1 or 2 (Depending on model type) P04A000: Exhaust Pressure Control Valve P04A000 / P047500: Exhaust Pressure Control Valve A P14AB00: Exhaust door control unit mechanical malfunction P049F00: Exhaust Pressure Control Valve "B |
|---|---|
| 2062626/2 | 2021-10-06. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. DTCs stored for all cylinders on Bank 1 or all cylinders on Bank 2 - W12 TSI engine derivative. Customer statement / workshop findings: -DTCs stored for all cylinders on Bank 1 or all cylinders on Bank 2 including multiple cylinder misfires DTC. -Misfires logged in one or both engine control units. -Engine warning light on. -Erratic engine operation. |
| 2061369/3 | 2021-10-06. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Engine overheating -Warning on theDIP-V8Kovomo Customer statement / workshop findings: -Customer reports an engine overheat warning on the DIP. -Engine overheats. -Unusual cooling fan operation at high temperatures. -There are no signs of coolant leaks both internally or externally. Technical background To heat the engine as quickly as possible during cold starting, delivery of coolant from the coolant pump is interrupted in the warm-up phase by the solenoid valve for the mechanical coolant pump. The solenoid is designed to cut off the vacuum supply to the coolant pump when the engine reaches the maximum temperature, the vacuum cut off allows the engine to start circulating coolant by retracting a sleeve which is situated around the coolant pump impeller. When the solenoid is at fault (sticking open) the vacuum supply is constant, this allows the sleeve to stay in position around the impellor which leads to the symptoms described within the Customer statement/Workshop findings section of this TPI |
| 2063954/3 | 2021-10-06. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Engine warning light illuminated within the DIP during acceleration - DTC P029900 evident - W12 TSI only Customer statement: Engine warning light and max engine speed 4000 rpm warning evident within the DIP during acceleration - Warning on DIP first appears when accelerating (During boost) Workshop findings: DTC P029900 evident within the engine control unit/s In the event the afore mentioned symptoms are evident the operative should refer to the onward instructions |
| 2063354/2 | 2021-10-06. Service bulletin. ENGINE AND ENGINE COOLING. V8 Kovomo - Whining noise - Front of the engine at idle speed Customer statement: Erratic whining noises from the front of the engine at idle speed. Workshop findings: The irregular knocking noises can be assigned to the front of the engine. There are no further complaints (such as poor engine or engine cooling system performance, event entries, etc.) |
| 2060596/3 | 2021-10-06. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE; ENGINE AND ENGINE COOLING. Transmission DTC - U040100 50273/C461 Invalid Data Received From ECM/PCM "A" Customer statement / workshop findings: Diagnostic Trouble Code (DTC) U040100 50273/C461 Invalid Data Received From ECM/PCM "A" stored within the Transmission Control Unit. Technical background: During Adaptive Cruise Control (ACC) brake to stop events, it is possible for the brake pressure to decay at a rate outside of specified parameters, DTC - U040100 50273/C461 Invalid Data Received From ECM/PCM "A" will therefore be stored within the Transmission Control Unit. |
| 2050334/7 | 2021-10-05. Service bulletin. ENGINE AND ENGINE COOLING. Ticking noise from engine bay. Customer statement / workshop findings: Ticking noise emanating from rear of Bank 1 cylinder head Technical background: Noise from failed vacuum pump. Measure: A specific vacuum pump failure is known to create a ticking noise. This ticking noise, on initial inspection, is easily misinterpreted as a fault in the valve train or fuel injector, when in reality it is more likely to be produced by a defective vacuum pump. Therefore always ensure that this type of noise is identified precisely using a stethoscope. Specifically use the stethoscope to check the vacuum pump located at the rear of Bank 1 cylinder head, when this is found to be the origin of the noise then change the vacuum pump and retest. |
| 2049586/8 | 2021-10-05. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Misfiring, W12 TSI - Excessive carbon build up cylinder leakage. Customer statement / workshop findings: Customer statement: Emission control warning signal displayed, engine misfire Workshop findings: Event entries in engine control unit relating to cylinder misfires excessive carbon build up to leading to cylinder leakage and spark plug foul. Technical background: Deviations in the country-specific fuel specifications can lead to carbon deposits on the injectors. If pronounced these deposits can lead to spark plug fouling, cylinder leakage and fouled injectors all influencing combustion in the cylinder. As a result the above event entries are logged in the engine control unit. Measure: - Follow the Misfire best practice TPI 2051187 in order to confirm that the root cause of the misfire is excessive cylinder carbonisation leading to excessive cylinder leakage/fouling |
| 2051219/6 | 2021-10-05. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. W12 TSI Camshaft Phaser Position Related DTC. Customer statement / workshop findings: Customer reporting Emission Control Warning Indicator displayed. Engine running rough. |
| 2051187/6 | 2021-10-05. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Poor Engine Running Complaints (Misfires) Petrol Engines Only. Customer statement / workshop findings: Poor engine running, reduced power, engine warning lamp illuminated. Technical background: Technical Product Information (TPI) to assist Retailers when diagnosing poor engine running or misfire. Measure: The following TPI should be carried out sequentially to ensure the root cause and analysis of the concern are identified without unnecessary work or repetitive actions taking place. |
| 2028808/5 | 2021-10-04. Service bulletin. ENGINE AND ENGINE COOLING. Service info: Engine oil Specific oil type and oil consumption reference. Customer statement / workshop findings: Engine oil level requires top up between services Technical background: The use of the correct oil for each engine type is critical for its continued performance, reliability and ultimately warranty. The workshop manual should always be the first point of reference, ensuring the correct lubricant is used for each specific model year and engine type Should oil be required the parts catalogue must be referred to ensuring the correct VIN is always used when ordering |
| 2053348/4 | 2021-09-04. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. W12 Engine management light on - Turbocharger speed sensor DTCs stored. Customer statement / workshop findings - The engine management light is on. Workshop findings: The customer statement can be reproduced. Either of the following DTCs are stored in address 01 Engine Control Module 1 or address 11 Engine Control Module 2 |
| 2061171/5 | 2021-08-07. Service bulletin. FUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. New Continental GT/GTC and New Flying Spur - V8 Kovomo - Fuel Pressure Regulation. Customer statement / workshop findings: Check Engine Lamp illuminated within the Driver Instrument Panel (DIP) with one or multiple DTCs as detailed below: - P310B00 Low Fuel Pressure Regulation with symptom code 2636 - P014800 Fuel Deliver Error - P019100 Fuel Rail pressure Sensor A Circuit Range/Performance - Misfire DTCs There may be multiple DTCs and symptoms present due to fuel pressure regulation or fuel supply issues Technical background In the event the customer complaint relates to the following: - Customer experienced poor start up - proceed with the remaining instructions |
| 2063678/1 | 2021-08-07. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. P245000 - EVAP System Switching Valve A Performance/Stuck Open DTC logged - V8 Kovomo. Customer Statement: Emission control system warning light illuminated within the DIP. Workshop findings: DTC P245000 - EVAP System Switching Valve A Performance/Stuck Open - With symptom code 11952 Technical background: Refer to the Measure section of this TPI |
| 2061171/6 | 2021-08-07. Service bulletin. FUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. New Continental GT/GTC and New Flying Spur - V8 Kovomo - Fuel Pressure Regulation. Customer statement / workshop findings: Check Engine Lamp illuminated within the Driver Instrument Panel (DIP) with one or multiple DTCs as detailed below: - P310B00 Low Fuel Pressure Regulation with symptom code 2636 - P014800 Fuel Deliver Error - P019100 Fuel Rail pressure Sensor A Circuit Range/Performance - Misfire DTCs There may be multiple DTCs and symptoms present due to fuel pressure regulation or fuel supply issues Technical background: In the event the customer complaint relates to the following: - Customer experienced poor start up - proceed with the remaining instructions. |
| 2063954/1 | 2021-08-06. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Engine warning light illuminated within the DIP during acceleration - DTC P029900 evident - W12 TSI only Customer statement: Engine warning light and max engine speed 4000 rpm warning evident within the DIP during acceleration - Warning on DIP first appears when accelerating (During boost) Workshop findings: DTC P029900 evident within the engine control unit/s Technical background: One of the turbochargers may not be achieving full boost, the issue can be related to a poor connection between the applicable boost pressure valve vacuum solenoid and the signal wire to the applicable Engine Control Module (ECM) leading to a lack of vacuum supplied to the waste- gate when under load In the event the afore mentioned symptoms are evident the operative should refer to the instructions within the Measure section of this TPI in conjunction with Rep.Gr 21 - Boost pressure valve vacuum solenoid (to assist identifying the component location) |
| 2058423/6 | 2021-07-02. Service bulletin. ENGINE AND ENGINE COOLING. New Continental GT / GTC, New Flying Spur and Bentayga Speed - Low Oil Pressure Warning During Early Vehicle Life. Condition: Warning on the Driver Instrument Panel (DIP) - Oil pressure too low DTCs relating to oil pressure may also be stored within the Master ECU. Diagnostic Trouble Codes (DTC) P052400: Engine Oil Pressure Too Low and/or P15AA00: Engine oil pressure - Lower limit not reached stored in the Master Engine Control Unit (ECU). Service: VERY IMPORTANT: Prior to conducting the onward instructions, the following symptoms MUST be evident - Warning on Driver Instrument Panel (DIP) Oil pressure too low And/or - Diagnostic Trouble Codes (DTC) P052400: Engine Oil Pressure Too Low and/or P15AA00: Engine oil pressure - Lower limit not reached stored in the Master Engine Control Unit (ECU) Should any of the afore mentioned not be evident and the symptoms cannot be reproduced. No further action should be taken unless the issue can be reproduced or demonstrated by the customer In the event the symptom/s are evident please conduct the onward Diagnosis Instructions |
| 2062626/1 | 2021-04-08. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT; ENGINE AND ENGINE COOLING. DTCs stored for all cylinders on Bank 1 or all cylinders on Bank 2 - W12 TSI engine derivative. Customer statement / workshop findings: - DTCs stored for all cylinders on Bank 1 or all cylinders on Bank 2 including multiple cylinder misfires DTC - Misfires logged in one or both engine control units - Engine warning light on - Erratic engine operation Technical background: Refer to the Measure section of this TPI |
| 2062016/1 | 2021-02-05. Service bulletin. ELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING. DTCs P014800 and/or P008A00 - Rough running & potentially poor start up performance - MIL light on - Possible misfires. Customer statement: - The Engine management light is on - Rough running and potentially poor start up performance. and/or - Engine misfires Very Important: Should the afore mentioned symptoms and/or DTCs be evident with NO misfires reported the operative MUST raise a DISS query and await feedback from Product Support before conducting any further work Workshop findings: - All three customer statements can be reproduced - DTCs listed below are also evident |
| 2058423/5 | 2021-02-05. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. New Continental GT / GTC, New Flying Spur and Bentayga Speed - Low Oil Pressure Warning During Early Vehicle Life Customer statement / workshop findings: Warning on the Driver Instrument Panel (DIP) - Oil pressure too low DTCs relating to oil pressure may also be stored within the Master ECU. Diagnostic Trouble Codes (DTC) P052400: Engine Oil Pressure Too Low and/or P15AA00: Engine oil pressure - Lower limit not reached stored in the Master Engine Control Unit (ECU) Measure: VERY IMPORTANT: Prior to conducting the onward instructions, the following symptoms MUST be evident - Warning on Driver Instrument Panel (DIP) Oil pressure too low And/or - Diagnostic Trouble Codes (DTC) P052400: Engine Oil Pressure Too Low and/or P15AA00: Engine oil pressure - Lower limit not reached stored in the Master Engine Control Unit (ECU) Should any of the afore mentioned not be evident and the symptoms cannot be reproduced No further action should be taken unless the issue can be reproduced or demonstrated by the customer |
| 2061362/1 | 2020-12-05. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Engine intermittently fails to start. Customer statement: Customer unable to intermittently start the engine with the start button. Workshop findings: DTC - B143C29: Access/start authorization button, Range/Performance stored within address 46 -Convenience system central control unit Technical background: Refer to the Measure section of this TPI |
| 2061369/1 | 2020-12-04. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Engine overheating - Warning on the DIP - V8 Kovomo. Customer statement / workshop findings: -Customer reports an engine overheat warning on the DIP -Engine overheats -Unusual cooling fan operation at high temperatures -There are no signs of coolant leaks both internally or externally Technical background: To heat the engine as quickly as possible during cold starting, delivery of coolant by the coolant pump is interrupted in the warm-up phase by the solenoid for the mechanical coolant pump. The solenoid is designed to cut off the vacuum supply to the coolant pump when the engine reaches the maximum temperature, the vacuum cut off allows the engine to start circulating coolant by retracting a sleeve which is situated around the coolant pump impeller. When the solenoid is at fault (sticking open) the vacuum supply is constant, this allows the sleeve to stay in position around the impellor which leads to the symptoms described within the Customer statement/Workshop findings section of this TPI. |
| 2060432/2 | 2020-11-07. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT; ELECTRICAL SYSTEM. New Continental GT/GTC and New Flying Spur - Exhaust Flap - Diagnostic Trouble Code. Customer statement/workshop findings: Warning lamp illuminated on Driver Instrument Panel (DIP) Drive system fault. Contact your Bentley dealer displayed on DIP Technical background: The root cause of Exhaust Flap Control Unit malfunction is electrical shorting of the commutator segments, this is caused by an accumulation of Sludge within the Control Unit. A DTC is stored when the respective Control Unit does not move through its full range of motion. |
| 2058423/3 | 2020-11-07. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. New Continental GT / GTC, New Flying Spur and Bentayga Speed - Low Oil Pressure Warning During Early Vehicle Life. Customer statement / workshop findings: Warning on the Driver Instrument Panel (DIP) - Oil pressure too low DTCs relating to oil pressure may also be stored within the Master ECU. Diagnostic Trouble Codes (DTC) P052400: Engine Oil Pressure Too Low and/or P15AA00: Engine oil pressure - Lower limit not reached stored in the Master Engine Control Unit (ECU) Technical background: CAUTION: DO NOT CONTINUE WITH THIS DOCUMENT IF THE ENGINE EXHIBITS ANY ABNORMAL MECHANICAL NOISE OR HAS AN ENGINE LUBRICATING OIL LEAK – SEEK FURTHER ADVICE THROUGH A NEW OR EXISTING DISS QUERY |
| 2053170/6 | 2020-11-05. Service bulletin. POWER TRAIN; EQUIPMENT; ENGINE; ELECTRICAL SYSTEM. Gear shift optimisation procedure - W12 TSI only. Customer statement / workshop findings: Customer reporting dissatisfaction with transmission shift quality in various driving conditions Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non- approved aftermarket modifications conducted including the modification of the engine control modules ( chip tuning) Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further repairs relating to the shift quality complaint Technical background: IMPORTANT: To allow the engine and transmission to adapt to the customers driving style the vehicle MUST either have covered at least 1000 miles/1600 Km or must have been used over a six week period (which ever occurs first) before carrying out the instructions within this TPI |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.