Service bulletins for the 2019 Bentley Continental
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
828 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Engine are shown. Show all
| 2053351/6 | 2020-11-03. Service bulletin. ENGINE AND ENGINE COOLING. Buzzing noise from engine area. Customer statement / workshop findings Workshop findings: Buzzing noise heard at idle from the sump area when the vehicle is elevated on a workshop ramp. The noise cannot be heard from inside the cabin or outside of the vehicle in normal circumstances. Technical background: A buzzing noise can be generated by the oil pump when the engine is running at idle. |
|---|---|
| 2058423/4 | 2020-11-03. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. New Continental GT/GTC, New Flying Spur and Bentayga Speed - Low Oil Pressure Warning During Early Vehicle Life Customer statement/workshop findings: Warning on the Driver Instrument Panel (DIP) - Oil pressure too low DTCs relating to oil pressure may also be stored within the Master ECU. Diagnostic Trouble Codes (DTC) P052400: Engine Oil Pressure Too Low and/or P15AA00: Engine oil pressure -Lower limit not reached stored in the Master Engine Control Unit (ECU) Technical background: CAUTION: DO NOT CONTINUE WITH THIS DOCUMENT IF THE ENGINE EXHIBITS ANY ABNORMAL MECHANICAL NOISE OR HAS AN ENGINE LUBRICATING OIL LEAK SEEK FURTHER ADVICE THROUGH A NEW OR EXISTING DISS QUERY |
| 2049586/7 | 2020-11-03. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT. Misfiring, W12 TSI - Excessive carbon build up cylinder leakage. Customer statement/workshop findings: Customer statement: Emission control warning signal displayed, engine misfire Workshop findings: Event entries in engine control unit relating to cylinder misfires – excessive carbon build up to leading to cylinder leakage and spark plug foul Technical background: Deviations in the country-specific fuel specifications can lead to carbon deposits on the injectors. If pronounced these deposits can lead to spark plug fouling, cylinder leakage and fouled injectors all influencing combustion in the cylinder. As a result the above event entries are logged in the engine control unit |
| 2057978/4 | 2020-11-03. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT. Engine Lubricating Oil - Replenishment. Customer statement / workshop findings: Engine lubricating oil lamp illuminated on driver instrument panel. Engine lubricating oil requires topping up between services. Technical background: In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically, engines with specified running-in periods consume more oil during the running-in period, and the oil consumption will stabilize after the running-in period. Refer to the Owners Manual for specific running-in procedures. Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, ambient temperature and road conditions. Additional factors are the amount of oil dilution from water condensation or fuel residue, and the oxidation level of the oil. Certain driving conditions may negatively influence the rate of oil consumption. This can occur while the vehicle is operated in city driving conditions, for example: stop and go traffic with extended idle periods. |
| 2050334/6 | 2020-11-03. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. Ticking noise from engine bay. Customer statement/workshop findings: Ticking noise emanating from rear of Bank 1 cylinder head Technical background: Noise from failed vacuum pump |
| 2060432/1 | 2020-09-05. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. New Continental GT / GTC - Exhaust Flap - Diagnostic Trouble Code. Customer statement / workshop findings Warning lamp illuminated on Driver Instrument Panel (DIP) Drive system fault. Contact your Bentley dealer displayed on DIP One or more of the following Diagnostic Trouble Codes (DTCs) stored within Engine Control Modules (ECMs) 1 or 2: P04A000: Exhaust Pressure Control Valve B P04A000 / P047500: Exhaust Pressure Control Valve A P14AB00: Exhaust door control unit mechanical malfunction P049F00: Exhaust Pressure Control Valve B Technical background The root cause of Exhaust Flap Control Unit malfunction is electrical shorting of the commutator segments, this is caused by an accumulation of Sludge within the Control Unit. A DTC is stored when the respective Control Unit does not move through its full range of motion. |
| 2053351/5 | 2020-09-05. Service bulletin. ENGINE AND ENGINE COOLING. Buzzing noise from engine area Customer statement / workshop findings: Buzzing noise heard at idle from the sump area when the vehicle is elevated on a workshop ramp. The noise cannot be heard from inside the cabin or outside of the vehicle in normal circumstances. Technical background: A buzzing noise can be generated by the oil pump when the engine is running at idle. |
| 2059899/2 | 2020-08-08. Service bulletin. EQUIPMENT; ENGINE; ELECTRICAL SYSTEM:SOFTWARE. 6250 RPM engine speed warning within the Drivers Instruments Panel (DIP). Customer statement/workshop findings: 6250 RPM engine speed warning in the Drivers Information Panel (DIP) Diagnostic address - 0017 - Drivers Information Panel (DIP) Technical background: A software update has been created to prevent the warning from displaying again |
| 2049586/6 | 2020-08-08. Service bulletin. ENGINE; ELECTRICAL SYSTEM. Misfiring, W12 TSI - Excessive carbon build up cylinder leakage. Customer statement/workshop findings: Customer statement: Emission control warning signal displayed, engine misfire Workshop findings: Event entries in engine control unit relating to cylinder misfires excessive carbon build up to leading to cylinder leakage and spark plug foul Technical background: Deviations in the country-specific fuel specifications can lead to carbon deposits on the injectors. If pronounced these deposits can lead to spark plug fouling, cylinder leakage and fouled injectors all influencing combustion in the cylinder. As a result the above event entries are logged in the engine control unit |
| 2060205/1 | 2020-08-07. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY. Bentayga - Engine Cooling System - DTC P218100. Customer statement / workshop findings: Emission Control Lamp illuminated on Driver Instrument Panel. The time to reach the correct engine coolant operating temperature has increased. Diagnostic Trouble Code (DTC) P218100 - Cooling System Performance is stored in the Engine Control Module (ECM), the vehicle warm up time is longer when compared to other vehicles of the same type. Technical background: It is possible for the engine coolant Thermostat to corrode over time, this corrosion is due to an adverse reaction of the Thermostat material with the engine coolant. The corrosion and subsequent build-up of debris prevents the correct operation of the thermostat when closing, resulting in over cooling. The ECM triggers a DTC when the target engine temperature is outside of the specified parameter. |
| 2028808/4 | 2020-08-05. Service bulletin. ENGINE AND ENGINE COOLING. Engine oil. Specific oil type and oil consumption reference. Customer statement / workshop findings: Engine oil level requires to:p up between services. Technical background The use of the correct oil for each engine type is critical for its continued performance, reliability and ultimately warranty. The workshop manual should always be the first point of reference, ensuring the correct lubricant is used for each specific model year and engine type Should oil be required the parts catalogue must be referred to ensuring the correct VIN is always used when ordering |
| 2058423/2 | 2020-06-04. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. New Continental GT / GTC, New Flying Spur and Bentayga Speed - Low Oil Pressure Customer statement / workshop findings: Warning on Driver Instrument Panel (DIP) Oil pressure too low. Diagnostic Trouble Codes (DTC) P052400: Engine Oil Pressure Too Low and/or P15AA00: Engine oil pressure - Lower limit not reached stored in the Master Engine Control Unit (ECU) Technical background: There have been several Customer complaints of low oil pressure warning displayed on the DIP, DTCs relating to oil pressure may also be stored within the Master ECU. The root cause of the warning and DTCs are not yet fully understood, however, for all complaints so far, changing the engine lubricating oil and engine oil filter normally resolves the concern. |
| 2057978/3 | 2020-05-06. Service bulletin. ENGINE AND ENGINE COOLING. Engine Lubricating Oil - Replenishment. Customer statement / workshop findings: Engine lubricating oil lamp illuminated on driver instrument panel. Engine lubricating oil requires topping up between services. Technical background: In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically, engines with specified running-in periods consume more oil during the running-in period, and the oil consumption will stabilize after the running-in period. Refer to the Owners Manual for specific running-in procedures. Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, ambient temperature and road conditions. Additional factors are the amount of oil dilution from water condensation or fuel residue, and the oxidation level of the oil. Certain driving conditions may negatively influence the rate of oil consumption. This can occur while the vehicle is operated in city driving conditions, for example: stop and go traffic with extended idle periods. |
| 2058340/1 | 2020-03-04. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. New Continental GT/GTC - Additional Cooling Pump - Diagnostic Trouble Code Customer statement / workshop findings Malfunction Indicator Lamp (MIL) illuminated on the Driver Instrument Panel (DIP). Fault code P26F500: Coolant pump C control circuit low stored within the Engine Control Unit (ECU). Technical background Note: Applicable only to vehicles without Park Heater. It is possible for the Additional Coolant Pump to corrode internally resulting in an electrical short circuit, MIL illumination and a fault code stored within the ECU. Measure Vehicles with a build date earlier than 15/07/2019 that have fault code P26F500: Coolant pump C control circuit low stored within the ECU require the Additional Coolant Pump to be exchanged for the new series production part - 06D.121.601. The Additional Coolant Pump must be replaced in conjunction with a new design mounting bracket, see Parts information for details. |
| 2058423/1 | 2020-02-08. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Customer statement / workshop findings: Warning on Driver Instrument Panel (DIP) Oil pressure too low. Diagnostic Trouble Code (DTC) P052400: Engine Oil Pressure Too Low stored in the Master Engine Control Unit (ECU). Technical background: There have been several Customer complaints of low oil pressure warning displayed on the DIP, a DTC for low oil pressure is also stored in the Master Engine Control Unit. The root cause of the warning and DTC are not yet fully understood, however for all complaints so far changing the engine lubricating oil and engine oil filter has resolved the concern. |
| 2051187/5 | 2020-01-09. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Condition: Poor engine running, reduced power, engine warning lamp illuminated. Technical Background: Technical Product Information (TPI) to assist Retailers when diagnosing poor engine running or misfires. Service: The following TPI should be carried out sequentially to ensure the root cause and analysis of the concern are identified without unnecessary work or repetitive actions taking place. |
| 2053177/6 | 2020-01-09. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Condition: Customer will not be aware of any fault codes. Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle. Technical Background: The attached document contains all of the current known Spurious DTCs for all vehicle variants. Should a particular TPI be listed as Archived within the attached document the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions with the attached document regarding the DTC description and actions (if any) which should be conducted Service: During routine diagnostic interrogation of vehicle systems use the attached document to determine the course of action to be taken. |
| 2055825/1 | 2019-10-04. Service bulletin. SUSPENSION; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; ELECTRICAL SYSTEM. Air supply unit exhaust noise from right hand rear - With engine running. The noise described is from the air supply unit exhaust The noise is mainly noticeable from outside of the vehicle, particularly on cold start It can also be heard inside the cabin from the rear seat area On receipt of a valid customer complaint and if the noise is deemed as excessive the installation of a silencer is required |
| 2053429-3 | 2019-07-29. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL. Emission control system lamp illuminated - DTC P044100 evident |
| 2053351.4 | 2019-07-01. Service bulletin. ENGINE. Buzzing noise from engine area |
| 2053350.2 | 2019-07-01. Service bulletin. ENGINE. W12 - Oil leak from engine |
| 2053348.3 | 2019-07-01. Service bulletin. ELECTRICAL SYSTEM; ENGINE. W12 Engine management light on - Turbocharger speed sensor DTC's stored |
| 2051893.3 | 2019-07-01. Service bulletin. ENGINE AND ENGINE COOLING. Engine coolant - Overheat condition |
| 2051893.2 | 2019-07-01. Service bulletin. ENGINE AND ENGINE COOLING. Engine coolant - Overheat condition |
| 2051187.3 | 2019-07-01. Service bulletin. ENGINE. Poor Engine Running Complaints (Misfires) Petrol Engines Only |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.