B2000 on the 2021 Bentley Bentayga
The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.
This code is specific to a manufacturer and is not described here. Its meaning is in the manufacturer's service information.
| 2075035/1 | 2024-10-02. Service bulletin. DTC B200000 with symptom code 1049088 evident in the high voltage battery charger control module (Diagnostic address C6). |
|---|---|
| 2061757/3 | 2024-07-06. Service bulletin. DTC B2000F2: Faulty control module (Symptom code 4102) and/or night vision warning light evident within the (DIP). Customer statement: Night vision warning lamp (Figure 1) is evident with the Drivers Information Panel (DIP). Workshop findings: DTC - B2000F2: Faulty control module (Symptom code 4102) evident within address 0084 - Night vision control module. |
| 2067711/1 | 2022-08-31. Service bulletin. DTCs B200000 and/or B200096 evident within 0075 (Emergency call module and communication unit) Customer statement: - Warning within the DIP (Figure 1) Emergency call function fault - Function unavailable - Contact your Bentley Retailer Technical Background: -Should either of the afore mentioned DTCs be stored the operative should conduct the test plan below: -0075 - Emergency Call Module and Communications Unit (Conbox) - Guided Functions - Conbox Memory Reset The applicable DTC(s) will be erased and the message within the DIP will no longer be evident |
| 2061757/2 | 2021-10-06. Service bulletin. Customer statement: Night vision warning lamp is evident with the Drivers Information Panel (DIP). Workshop findings: DTC - B2000F2: Faulty control module (Symptom code 4102) evident within address 0084 Night vision control module. Technical background: IMPORTANT: In the event that the issue is evident and the vehicle is post the VINs shown below, a DISS query must be raised ensuring the following is attached to the query. -Detailed description in which the issue occurred, for example -Driving on a quiet road with no traffic, conditions were wet, the road had no street lighting. -Clear photographs showing the condition of the night vision camera and night vision camera lens. -Current and up to date ODIS log. However, should the vehicle be prior to the VIN cut off, the operative MUST carry out the instructions within the Measure section of this TPI. New Flying Spur New Continental GT and New Continental GTC (all vehicles from SCBCD13S1KC071068 are to specification). Bentayga (all vehicles from SJAAL14V0KC025622 are to specification). |
| 2061757/1 | 2021-02-02. Service bulletin. DTC B2000F2: Faulty control module (Symptom code 4102) and/or Night vision warning light evident within the (DIP). Customer statement Night vision warning lamp (Figure 1) is evident with the Drivers Information Panel (DIP). Measure 1) Check and Confirm there is no damage to the Night vision camera lens - Check and confirm the camera is secure NOTE: Should no issues be found carry out the remaining onward instructions: - Follow the applicable DTC related test plan within ODIS to completion 2) Proceed with the replacement of the Night vision Control unit if required (as per test plan instruction) - Refer to Rep.Gr 44 - Control unit for night vision (J853) - To remove and fit NOTE: The operative MUST ensure the Night vision camera is calibrated as per Rep.Gr 44 |
5 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.