Service bulletins for the 2021 Bentley Bentayga
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
757 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Body and frame are shown. Show all
| 2061582.6 | 2022-11-08. Service bulletin. LATCHES/LOCKS/LINKAGES; STRUCTURE; ELECTRICAL SYSTEM. Driver/Passenger door/s creak on close - Bentayga Customer Statement: -Driver and/or Passenger door creak during the "Power close" function |
|---|---|
| 2068064.1 | 2022-11-08. Service bulletin. STRUCTURE; UNKNOWN OR OTHER. Front Door Clash Condition with the Rear Door Brightware (left and/or right hand side) Customer Statement: -The front door inner panel hem is clashing with the rear door lower brightware during the closing operation of the front door. |
| 2067489/1 | 2022-10-07. Service bulletin. STRUCTURE; VISIBILITY. Window side glass - Identification - Standard (STD) or Privacy (PRV) Customer Statement: - Incorrect side glass fitted - Standard (STD) not Privacy (PRV) or visa versa and/or Defects are evident within the glass Technical Background: -The instructions within the Measure section MUST only be followed if the glass is to be replaced |
| 2067740/1 | 2022-08-31. Service bulletin. STRUCTURE. Tailgate interior trim - Specification guidelines Customer Statement: -Suspected tailgate lower trim surface damage issues Technical Background: -The complaint could be received for the right and/or left hand side -Refer to the Measure section for further clarification |
| 2064482/2 | 2022-08-05. Service bulletin. STRUCTURE. Audible creak from the lower/central A Post when opening and/or closing the front door/s. Customer statement / workshop findings Audible creak coming from the lower/central A post in the vicinity of the check strap fixing point (Figure 1) during the opening and/or closing of the driver/passenger door. Technical background To confirm the issue is as described within the Customer statement refer to the video on the Bentley Hub referencing TPI 2064482/- In the event that the noise is as shown within the video the instructions within the Measure section should be followed. |
| 2067488/1 | 2022-08-05. Service bulletin. STRUCTURE. Veneer/trim mismatch - DISS query requirements. Customer statement / workshop findings: In the event that a trim mismatch is detected for example: - Piano black veneer is supplied although the customer ordered walnut veneer Or - The interior trim colour is incorrect for example: Cricket ball interior trim is supplied although the customer ordered Hotspur The operative should refer to the Technical background section |
| 2066738/1 | 2022-06-03. Service bulletin. STRUCTURE. Underfloor paint drain hole check (SC22/14). Technical background: Due to a process change within manufacturing, the paint drain hole (Figure 1) which is located on the left hand side of the floor pan may not have been sealed/covered IMPORTANT: No other cavities or drain holes are affected. Remedy: Refer to the instructions within the Work section |
| 2066738/2 | 2022-06-03. Service bulletin. STRUCTURE. Underfloor paint drain hole check (SC22/14). Technical background: Due to a process change within manufacturing, the paint drain hole (Figure 1) which is located on the left hand side of the floor pan may not have been sealed/covered IMPORTANT: No other cavities or drain holes are affected. Remedy: Refer to the instructions within the Work section. |
| 2066502/1 | 2022-04-07. Service bulletin. STRUCTURE; ELECTRICAL SYSTEM. Charging starts and stops when using a public charging unit. Customer statement / workshop findings: When using a public charging unit to charge the high voltage battery, charging starts and is then interrupted/stops Workshop findings The following DTC is also evident: P33E800: Charge socket A, charge connector lock mechanical malfunction passive/sporadic. Measure: 1) Referring to Rep.Gr 93 - Carry out an Inspection and classification of the Hybrid battery unit AX1 VERY IMPORTANT: In the event that the classification result of the battery is Normal the operative should conduct the remaining steps of this TPI from step 2 However If the classification result of the battery is either Danger or Warning then move the car to the quarantine area and raise a DISS immediately, the operative MUST NOT continue with any other work unless instructed via the open DISS query 2) Check the operation of the charging system using the customers and the retailers own charging equipment 3) Run a full diagnostic log and check if the DTC within the Technical background section are evident. |
| 2065760/1 | 2022-02-05. Service bulletin. STRUCTURE; EQUIPMENT. Rear Jacking point - Sill damage found during PDI. Customer statement / workshop findings: Damage found around the rear sill Jacking point during PDI (Figure 1). Measure: In the event the issue is as described, please raise a technical DISS query ensuring clear photographs are attached The operative MUST await feedback from Product Support before conducting any further work Note to Product Support: The DISS query should be second levelled to the applicable Senior Engineer for review before responding to the retailer Technical product information Rear Jacking point - Sill damage found during PDI Transaction No.: 2065760/1 |
| 2057988/6 | 2022-01-08. Service bulletin. EQUIPMENT; STRUCTURE. Bentayga Hybrid - Accessory Embargo. Customer statement / workshop findings Customer request to install fixed sill steps, deploying sill steps or Illuminated tread plates to Bentayga Hybrid vehicle. Technical background Due to the routing and proximity of high voltage cables it is strictly prohibited to install the following accessories on Bentayga Hybrid vehicles. - Fixed sill steps. - Deploying sill steps. - Illuminated tread plates NOTE: Tow bars cannot be fitted to Bentayga Hybrid vehicles due to certification IMPORTANT: Bentayga Styling Specification MUST NOT be fitted to Bentayga Hybrid vehicles from 19 to 20 Model year due to certification reasons However From 21 Model year onwards the Bentayga Styling specification can be fitted Note: Failure to observe these instructions may invalidate certain aspects of the vehicle warranty. In all instances, when placing an order for spare parts or accessories please refer to the electronic parts catalogue (ETKA) |
| 2051045/4 | 2022-01-06. Service bulletin. EQUIPMENT; STRUCTURE. Night vision camera - Washer jet leaking. Customer statement / workshop findings: Washer fluid dripping/leaking from the night vision camera washer jet. Technical background: Please note: The photographs shown within this TPI are based on a New Continental GT/C vehicle however the process is similar regardless of vehicle type Referring to Figure 1 - In the event the afore mentioned symptom is evident the operative should refer to the Measure section of this TPI to replace the night vision washer jet (short link hose -Circled) which connects the night vision camera washer jet (A) to the washer jet supply hose connector (B) |
| 2064824/3 | 2021-12-07. Service bulletin. STRUCTURE; ENGINE AND ENGINE COOLING; EQUIPMENT. Bentayga Hybrid - Left hand rear jacking block replacement and coolant pipe check (SC 21/38). Technical background Due to possible a clash condition between the high voltage system coolant pipe and the left hand rear jack block - Figure 1 (point A) the original left hand rear jack block must be replaced. Remedy - The left hand jack block requires replacement - A visual inspection of the high voltage system coolant pipe (situated adjacent to the left hand jack block) is required NOTE: Depending on the outcome of the inspection, the coolant pipe may require replacement (Refer the Work section) |
| 2064824/1 | 2021-12-07. Service bulletin. EQUIPMENT; STRUCTURE; ENGINE AND ENGINE COOLING. Bentayga Hybrid - Left hand rear jacking block replacement and coolant pipe check (SC 21/38). Technical background: Due to possible a clash condition between the high voltage system coolant pipe and the left hand rear jack block - Figure 1 (point A) the original left hand rear jack block must be replaced. Remedy: - The left hand jack block requires replacement - A visual inspection of the high voltage system coolant pipe (situated adjacent to the left hand jack block) is required NOTE: Depending on the outcome of the inspection, the coolant pipe may require replacement (Refer the Work section) |
| 2064779/1 | 2021-11-05. Service bulletin. SUSPENSION; STRUCTURE. Customer statement: Creaking/squeak noise from the front suspension. Workshop findings: Defective upper inner lever bush. Technical background Verify that the customer complaint matches the sound file within the Bentley Hub Reference TPI Transaction number 2064779/-. The noise present in the sound file is caused by defective upper inner lever bush/bushes, the noise can appear in the following possible scenario. -When the vehicle is moved with steering input over uneven surfaces (for e.g. a ramp or speed bump). If the customer complaint occurs in any of the above circumstances and the noise can be clearly assigned to the noise within the sound file Refer to the instructions within the Measure section of this TPI. VERY IMPORTANT NOTE FOR HYBRID VEHICLES: -Hybrid vehicles use a High voltage system and MUST only be worked on by suitably qualified personnel. -Please ensure all guidelines within the repair manual are strictly followed before and whilst conducting any work on vehicles with a High voltage system |
| 2064321/2 | 2021-11-05. Service bulletin. STRUCTURE. Bentayga - Rear jack block fitting instruction Technical background: The repair instructions within this Service Campaign are different depending on the vehicle type (Hybrid or Non Hybrid) the operative MUST ensure the correct instructions within the Work section are conducted as follows: Hybrid vehicles (Section 1 within the Work section). The left hand rear jack block 4M4 802 829B (supplied with vehicle) MUST NOT be fitted during the PDI procedure. If fitted a clash condition could occur between the left hand rear jack block and left hand coolant pipe. NOTE: The coolant pipe is only applicable to Bentayga Hybrid vehicles. IMPORTANT: The right hand jack block 4M4 802 830B supplied in the kit bag MUST be fitted using (x2) fixings, the fixings were not supplied with the kit bag at the time of vehicle dispatch. Non Hybrid vehicles (Section 2 within the Work section): The left hand rear jack block 4M4 802 829B and right hand jack block 4M4 802 830B supplied with the kit bag can be fitted to Non Hybrid vehicles using (x4) N911 512 01. |
| 2064460/1 | 2021-10-07. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT; STRUCTURE. Customer statement / workshop findings: Rear side window blind/s do not operate from the individual switches and/or from the drivers door master switches. Technical background: The following most common failure modes should be considered before proceeding with the instructions within the Measure section -Rear blind/s do not operate following a CAN bus sleep -Rear blind/s do not operate if the switch operation is a prolonged hold instead of a Press and release operation -Rear blind/s do not operate following the loss of control module basic settings -Rear blind/s will also not operate if the Child Lock is on -Rear blind/s will cease to operate if there are repeated operations of the blind sufficient to trigger a fail safe mode (usually between 10 to 15 operations in a very short period) -As instructed within the owners handbook, the rear blind/swill not operate if window is in the lowered position -The blind will also not operate in extreme cold temperature for example -10 degrees Celsius or 14 degrees, Fahrenheit. VERY IMPORTANT: In the event that all the previous recommendations have been checked/confirmed and the issue is still evident, the operative should conduct a software parameter update to all four door control modules 0042, 0052, 00BB, 00BC to restore the functionality of the rear blinds. |
| 2064469/1 | 2021-10-07. Service bulletin. STRUCTURE; ELECTRICAL SYSTEM. Bentayga - Rear Window Blinds Do Not Fully Retract. Customer statement / workshop findings: Rear window blind/s do not fully retract (Jammed) |
| 2064482/1 | 2021-10-07. Service bulletin. STRUCTURE. Audible creak from the lower/central A Post when opening and/or closing the front door/s. Customer statement / workshop findings: Audible creak coming from the lower/central A Post in the vicinity of the check strap fixing point during the opening and/or closing of the driver/passenger door. Technical background: To confirm the issue is as described within the Customer statement refer to the video on the Bentley Hub referencing TPI2064482/-. In the event that the noise is as shown within the video the instructions within the Measure section should be followed. |
| 2053351/7 | 2021-10-06. Service bulletin. ENGINE AND ENGINE COOLING; STRUCTURE. Buzzing noise from engine area. Customer statement / workshop findings Workshop findings: Buzzing noise heard at idle from the sump area when the vehicle is elevated on a workshop ramp. The noise cannot be heard from inside the cabin or outside of the vehicle in normal circumstances. Technical background: A buzzing noise can be generated by the oil pump when the engine is running at idle. Measure: Test a comparable vehicle with the same Engine derivative. If the same noise is apparent on the comparable vehicle and no oil pressure warnings or relevant DTCs are stored then the noise can be considered a characteristic of the vehicle and no further action should be taken. |
| 2062075/2 | 2021-10-06. Service bulletin. STRUCTURE; EQUIPMENT; ELECTRICAL SYSTEM. Owner's Handbook - Incorrect roof console image shown - Garage Door Opener (GDO) Condition: The Owners Handbook is showing an incorrect roof console image, highlighting the Garage Door Opener (GDO) programming switches for Bentayga 21MY vehicle derivatives NOTE: The (GDO) is an optional feature |
| 2057841/3 | 2021-10-06. Service bulletin. VISIBILITY; STRUCTURE. Windscreen replacement criteria whilst under manufacturers warranty Customer statement / workshop findings: Windscreen cracked/damaged Technical background: Please refer to the instructions within the Measure section of this TPI in the event that a windscreen is cracked/damaged NOTE: The instructions MUST be followed to help the retailer clarify if the windscreen should be replaced under manufacturers warranty (Stress crack) or Customer pay/insurance (external influence damage) |
| 2056582/4 | 2021-10-06. Service bulletin. STRUCTURE. Interior trim - Creak and rattle - Noise identification Customer statement: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work |
| 2064321/1 | 2021-09-08. Service bulletin. STRUCTURE; EQUIPMENT:MECHANICAL:INTEGRATED JACK/LEVELER/STABILIZER. Bentayga - Rear Jacking block fixings missing (SC 21/32). Technical background: The left and right hand rear jacking blocks are required to be fitted during the PDI process. The blocks are secured to the body using (x2) fixings per side. A small batch of kit bags were not supplied with any fixings (x4) in total. Remedy: Left and right hand rear blocks to be fitted using N911 512 01 (x4) |
| 2064093/1 | 2021-08-07. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; STRUCTURE. Loss of the EV Mode Active Pedal Detent Feature. Customer statement / workshop findings Loss of the EV Mode Active Pedal Detent feature on the vehicle. No force can be felt by driver when passing through the EV Mode threshold during the trajectory travel of the accelerator pedal TIP: Please also refer to the Owners handbook regarding accelerator pedal feedback response before commencing with the instructions within the Measure section. Technical background Software update for 0697 - Active accelerator pedal is available (slave Control unit of 0001 - ECM1) |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.