Service bulletins for the 2020 Bentley Bentayga
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
753 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Electrical system are shown. Show all
| 2061757/2 | 2021-10-06. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. Customer statement: Night vision warning lamp is evident with the Drivers Information Panel (DIP). Workshop findings: DTC - B2000F2: Faulty control module (Symptom code 4102) evident within address 0084 Night vision control module. Technical background: IMPORTANT: In the event that the issue is evident and the vehicle is post the VINs shown below, a DISS query must be raised ensuring the following is attached to the query. -Detailed description in which the issue occurred, for example -Driving on a quiet road with no traffic, conditions were wet, the road had no street lighting. -Clear photographs showing the condition of the night vision camera and night vision camera lens. -Current and up to date ODIS log. However, should the vehicle be prior to the VIN cut off, the operative MUST carry out the instructions within the Measure section of this TPI. New Flying Spur New Continental GT and New Continental GTC (all vehicles from SCBCD13S1KC071068 are to specification). Bentayga (all vehicles from SJAAL14V0KC025622 are to specification). |
|---|---|
| 2053177/16 | 2021-10-05. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM. All Vehicle Variants - Spurious DTC List. Customer statement / workshop findings Customer will not be aware of any fault codes. Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle. Technical background The operative should refer to the Bentley Hub referencing TPI 2053177/- The document (loaded onto the Hub) contains all of the current known Spurious DTCs for all vehicle variants. Should a particular TPI be listed as Archived within the attached document the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions with the document (loaded onto the Hub) regarding the DTC description and actions (if any) which should be conducted |
| 2063729/2 | 2021-10-05. Service bulletin. ELECTRICAL SYSTEM. Fitment of control modules from donor vehicles for test purposes Technical background: If an issue is suspected for one of the control modules listed below: - Onboard supply control unit (J519) - Convenience system central control unit (J393) - Data bus diagnostics interface (J533) - Control unit 1 for Information Electronics (J794) - Control unit in dash panel insert (J285) - Emergency call module control unit (J949) The fitment of donor parts from another vehicle is not advisable and only possible if approved from Product Support via an open DISS query. |
| 2051562/7 | 2021-10-05. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY; ELECTRICAL SYSTEM. 12 Volt - Battery condition checks. Customer statement / workshop findings: 12 Volt Battery test instruction Technical background: For all 12 volt battery issues relating to warranty or a parts warranty claim, a DISS query MUST be raised prior to battery replacement, refer to the instructions within the Measure section of this TPI |
| 2049586/8 | 2021-10-05. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Misfiring, W12 TSI - Excessive carbon build up cylinder leakage. Customer statement / workshop findings: Customer statement: Emission control warning signal displayed, engine misfire Workshop findings: Event entries in engine control unit relating to cylinder misfires excessive carbon build up to leading to cylinder leakage and spark plug foul. Technical background: Deviations in the country-specific fuel specifications can lead to carbon deposits on the injectors. If pronounced these deposits can lead to spark plug fouling, cylinder leakage and fouled injectors all influencing combustion in the cylinder. As a result the above event entries are logged in the engine control unit. Measure: - Follow the Misfire best practice TPI 2051187 in order to confirm that the root cause of the misfire is excessive cylinder carbonisation leading to excessive cylinder leakage/fouling |
| 2036678/4 | 2021-10-05. Service bulletin. ELECTRICAL SYSTEM. Speaker Replacement - Diagnostic checks. Customer statement / workshop findings: Audio output from speakers is distorted Technical background: There have been instances where door speakers have been changed under warranty for the complaint of sound distortion, yet when tested by ourselves and the supplier, no fault could be found with the returned unit. Production change: All speakers are subjected to a dynamic test and the individual results recorded for future reference |
| 2051519/9 | 2021-10-05. Service bulletin. VISIBILITY; ELECTRICAL SYSTEM. HVAC operation issues/HVAC Motor defect DTCs logged. Customer statement / workshop findings: HVAC operation issues and HVAC motor defect (DTCs) evident within address 08 Climatronic control unit, the DTCs can be static or sporadic (Intermittent) The Event memory entries (DTCs) shown within the Header data of this TPI are included as examples Technical background: The HVAC motors can become defective causing HVAC operational issues IMPORTANT: The following instructions should only be carried out on receipt of a valid customer complaint Or The operative is conducting EB28 or EB29 and issues are evident |
| 2051219/6 | 2021-10-05. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. W12 TSI Camshaft Phaser Position Related DTC. Customer statement / workshop findings: Customer reporting Emission Control Warning Indicator displayed. Engine running rough. |
| 2051187/6 | 2021-10-05. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Poor Engine Running Complaints (Misfires) Petrol Engines Only. Customer statement / workshop findings: Poor engine running, reduced power, engine warning lamp illuminated. Technical background: Technical Product Information (TPI) to assist Retailers when diagnosing poor engine running or misfire. Measure: The following TPI should be carried out sequentially to ensure the root cause and analysis of the concern are identified without unnecessary work or repetitive actions taking place. |
| 2055321/2 | 2021-09-04. Service bulletin. FUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Bentayga W12 - DTC 310B00 - Low fuel pressure regulation. Customer statement / workshop findings: Engine stalling when the engine is started from cold (at idle) Or after a delayed cold start. These issues can trigger DTC 310B00: Low Fuel Pressure regulation, Fuel pressure outside specification The following symbol can also be displayed on the Driver Instrument Panel (DIP) in conjunction with an error message start/stop unavailable |
| 2053348/4 | 2021-09-04. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. W12 Engine management light on - Turbocharger speed sensor DTCs stored. Customer statement / workshop findings - The engine management light is on. Workshop findings: The customer statement can be reproduced. Either of the following DTCs are stored in address 01 Engine Control Module 1 or address 11 Engine Control Module 2 |
| 2062080/3 | 2021-08-07. Service bulletin. FUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM. Bentayga V8 Kovomo - Fuel Pressure Regulation. Customer statement / workshop findings Check Engine Lamp illuminated within the Driver Instrument Panel (DIP) with one or multiple DTCs as detailed below: - P310B00 with symptom code 2636 - Low Fuel Pressure Regulation Low Fuel Pressure Regulation - P014800 Fuel Deliver Error - P019100 Fuel Rail pressure Sensor A Circuit Range/Performance - Misfire DTCs There may be multiple DTCs and symptoms present due to fuel pressure regulation or fuel supply issues Technical background In the event the customer complaint relates to the following: - Customer experienced poor start up - proceed with the remaining instructions |
| 2063657/1 | 2021-08-07. Service bulletin. ELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE. P245000 - EVAP System Switching Valve A Performance/Stuck Open DTC logged - Bentayga V8 Kovomo. Customer Statement: Emission control system warning light illuminated within the DIP (Figure 1). Workshop findings: DTC P245000 - EVAP System Switching Valve A Performance/Stuck Open - With symptom code 11952 Technical background: Refer to the Measure section of this TPI |
| 2064093/1 | 2021-08-07. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; STRUCTURE. Loss of the EV Mode Active Pedal Detent Feature. Customer statement / workshop findings Loss of the EV Mode Active Pedal Detent feature on the vehicle. No force can be felt by driver when passing through the EV Mode threshold during the trajectory travel of the accelerator pedal TIP: Please also refer to the Owners handbook regarding accelerator pedal feedback response before commencing with the instructions within the Measure section. Technical background Software update for 0697 - Active accelerator pedal is available (slave Control unit of 0001 - ECM1) |
| 2062261/2 | 2021-08-06. Service bulletin. ELECTRICAL SYSTEM; SUSPENSION. Bentayga - Air suspension warning light within the DIP - DTCs P089200 - C104707 - C103B13 - Evident within Address 74. Customer statement: Air suspension warning light within the DIP Workshop findings: One or a combination of the DTCs shown below are evident within address 74 - P089200 - Symptom Code 3145792 - TCM Power Relay Sense Circuit Intermittent (Level Control Valves Open Circuit) - C103B13 - 3145909 - Solenoid for level control system Open circuit - C104707 - 3211279 - Level control valves mechanical malfunction |
| 2063954/1 | 2021-08-06. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Engine warning light illuminated within the DIP during acceleration - DTC P029900 evident - W12 TSI only Customer statement: Engine warning light and max engine speed 4000 rpm warning evident within the DIP during acceleration - Warning on DIP first appears when accelerating (During boost) Workshop findings: DTC P029900 evident within the engine control unit/s Technical background: One of the turbochargers may not be achieving full boost, the issue can be related to a poor connection between the applicable boost pressure valve vacuum solenoid and the signal wire to the applicable Engine Control Module (ECM) leading to a lack of vacuum supplied to the waste- gate when under load In the event the afore mentioned symptoms are evident the operative should refer to the instructions within the Measure section of this TPI in conjunction with Rep.Gr 21 - Boost pressure valve vacuum solenoid (to assist identifying the component location) |
| 2063729/1 | 2021-07-02. Service bulletin. ELECTRICAL SYSTEM. Fitment of control modules from donor vehicles for test purposes. Customer statement / workshop findings: Refer to the Technical background section before considering the fitment of control modules from donor vehicles for test purposes Technical background: If an issue is suspected for one of the control modules listed below: - Onboard supply control unit (J519) - Convenience system central control unit (J393) - Data bus diagnostics interface (J533) - Control unit 1 for Information Electronics (J794) - Control unit in dash panel insert (J285) - Emergency call module control unit (J949) The fitment of donor parts from another vehicle is not advisable and only possible if approved from Product Support via an open DISS query. The donor of parts should only be used as a temporary test VERY IMPORTANT: The ODIS replace routine MUST NOT be carried out under any circumstances |
| 2053177/15 | 2021-06-04. Service bulletin. ELECTRICAL SYSTEM. All Vehicle Variants - Spurious DTC List. Customer statement / workshop findings: Customer will not be aware of any fault codes. Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle. Technical background: The attached document contains all of the current known Spurious DTCs for all vehicle variants. Should a particular TPI be listed as Archived within the attached document the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions with the attached document regarding the DTC description and actions (if any) which should be conducted. |
| 2063410/1 | 2021-06-04. Service bulletin. ELECTRICAL SYSTEM. Infotainment Main unit (5F / J794) fault finding/diagnosis procedure. Customer statement / workshop findings: Issue suspected with the Infotainment Main unit (5F / J794) - For example: - MMI screen image flickers or goes blank - No response to selection - Audio cuts-out Technical background: Refer to the Measure section regarding any Infotainment Main unit (5F / J794) fault finding/diagnosis |
| 2061369/2 | 2021-05-06. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Engine overheating - Warning on the DIP - V8 Kovomo Customer statement / workshop findings: - Customer reports an engine overheat warning on the DIP - Engine overheats - Unusual cooling fan operation at high temperatures - There are no signs of coolant leaks both internally or externally Technical background: To heat the engine as quickly as possible during cold starting, delivery of coolant from the coolant pump is interrupted in the warm-up phase by the solenoid valve for the mechanical coolant pump |
| 2053177/14 | 2021-05-05. Service bulletin. ELECTRICAL SYSTEM. All Vehicle Variants - Spurious DTC List. Customer statement / workshop findings: Customer will not be aware of any fault codes. Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle. Technical background: The attached document contains all of the current known Spurious DTCs for all vehicle variants. Should a particular TPI be listed as Archived within the attached document the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions with the attached document regarding the DTC description and actions (if any) which should be conducted |
| 2062219/1 | 2021-04-08. Service bulletin. EQUIPMENT; FORWARD COLLISION AVOIDANCE; ELECTRICAL SYSTEM. MMI Sub Menu Software Revision - Bentayga (SC 21/05) Technical background: Safeguard sub menu Warning option is incorrectly shown within the MMI screen. Remedy: Software update available for the Airbag control module Address 15, once conducted the Safeguard menu/s will not be evident within the MMI |
| 2062080/2 | 2021-04-08. Service bulletin. FUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Bentayga V8 Kovomo - Fuel Pressure Regulation. Customer statement / workshop findings: Check Engine Lamp illuminated within the Driver Instrument Panel (DIP) with one or multiple DTCs as detailed below: - P310B00 with symptom code 2636 - Low Fuel Pressure Regulation Low Fuel Pressure Regulation - P014800 Fuel Deliver Error - P019100 Fuel Rail pressure Sensor A Circuit Range/Performance - Misfire DTCs There may be multiple DTCs and symptoms present due to fuel pressure regulation or fuel supply issues. Technical background: In the event the customer complaint relates to the following: Customer experienced poor start up - proceed with the remaining instructions NOTE: The operative must gather information regarding the Customer experience regarding when the issue occurred for example: Pre- conditions, warning lights and driveability at the time that the issue occurred, details when the vehicle was last refuelled and the grade of fuel used The operative must now use the information contained within the “Measure” section to determine the correct analysis and repair procedure |
| 2062626/1 | 2021-04-08. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT; ENGINE AND ENGINE COOLING. DTCs stored for all cylinders on Bank 1 or all cylinders on Bank 2 - W12 TSI engine derivative. Customer statement / workshop findings: - DTCs stored for all cylinders on Bank 1 or all cylinders on Bank 2 including multiple cylinder misfires DTC - Misfires logged in one or both engine control units - Engine warning light on - Erratic engine operation Technical background: Refer to the Measure section of this TPI |
| 2062365/1 | 2021-04-08. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Bentayga Hybrid DTC P103A00 evident Engine Oil Fuel Portion Too High. Customer statement: - Warning message within the DIP - The message asks the customer to warm up engine accompanied by a yellow warning (Figure 1) No other symptoms are experienced. Technical background: The warning is caused by the level of unburnt fuel in the engine oil. This value is calculated by the Engine Control Module (ECM) and is based on the driver usage pattern The more cold starts the Internal Combustion Engine (ICE) is exposed to the higher the chance of fuel making its way into the engine oil via the cylinders When the fuel calculation reaches the pre-programmed amount this then causes the DTC to be triggered |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.