# C1115 on the 2013 Audi Q5

The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.

This code is specific to a manufacturer and is not described here.

## Bulletins for this model year that name C1115

- [10226469](https://open.wenmarpro.com/bulletins/10226469), 2022-11-21: Lane Change Assistant "Sensors Blocked" warning in DIS \(DTC C1114F3 and C1115F5\)
- [10226448](https://open.wenmarpro.com/bulletins/10226448), 2022-11-21: Lane Change Assistant "Sensors Blocked" warning in DIS \(DTC C1114F3 and C1115F5\)
- [10124014](https://open.wenmarpro.com/bulletins/10124014), 2017-11-17: Supersedes Technical Service Bulletin Group 96 number 13\-49 dated February 1, 2013. Audi Side Assist deactivates itself immediately after the engine starts. DTC C1115F2 \(Lane change assistance control module 2 Function limitation due to insufficient voltage\) is logged in the lane change assistance control module, J769 \(3C\). The lane change assistance control module, J769 \(3C\), checks voltage after each engine on cycle. During this check, the voltage can be incorrectly reported which causes the DTC to set.
- [10119961](https://open.wenmarpro.com/bulletins/10119961), 2017-10-21: Supersedes Technical Service Bulletin Group 96 number 13\-51 dated February 15, 2013. Audi side assist deactivates immediately after the engine is started. DTC C1115F2 \(Lane change assistance control module 2 Function limitation due to insufficient voltage\) is logged in the lane change assistance control module. The software of the lane change assistance control module, J769 \(3C\), has been optimized to remove this condition.